I just went thru this exact (almost) procedure, getting my new Vista desktop to network with our Win xp computer with printer. Not so easy, but here are the instructions which work: 1. To set up the house network, on the Vista computer: Start-Control Panel-System and Maintaint.- system-computer name,domain,workgroup settings area on the screen, hit the "change settings" button, then system properties-computer name tab-change computer name/domain changes-in Workgroup type your home network's name-OK. Then to set up the printer, a huge pain, but doable: On the Vista computer: Start-Control Panel-add printer-add Local Printer (I know it's on a network, but this is the way to do it)-create a new port-default is "local port",leave it-next you have to enter a port name, this is the tricky part, you have to type in the path to the printer manually, the path should look like: \\your exact host computer name\your exact printer's sharing name. That's it. To check for the exact host computer name, go to the host computer, my computer, and a screen will come up with it's official name, use it, case sensitive. For printer name, go to host computer, printers area thru the control panel, rt. click the printer and properties. A sharing tab will show, click it, the exact name for the shared printer will show, again use it case sensitive. The above took me all day when I got my new Vista, hope it helps.

Zep - I have 3 devices in my network list: 1) 1394 net adapter 2)intel 82566mm gigabit network connection (this one I was able to get an updated driver - but on my network connections, it still shows as local area connection - "network cable unplugged,fire..." and I'm not able to click that and get the rest of the sentence. if I click it it just gives me the name of the adapter. 3) intel wireless wifi link 4965AGN The first and third ones say they are connected and firewalled. I believe that this last wireless 4965AGN is the one that has problems and gets repaired. I could be wrong about that. The LAN one I think has always been unconnected/unplugged. I don't know what that's for or if I need it. Is that my wired internet connection? Thanks. Lynn. PS - if I go through network devices and select update drivers, it only offered updated drivers for the intel 82566mm gigabit network connection. Is there any point in googling for updated driver if this route indicate no new drives exist?

I don't think your laptop has HDMI out but it does have S-video out, correct? You could probably pickup an S-video cable pretty cheaply. Here's a video which I didn't actually watch but it looks like it probably explains how to do exactly what you want to do: http://www.youtube.com/watch?v=3vz-_wsrsAY Personally, I just run a regular monitor cord(male on both ends) between my desktop computer and my TV. Assuming your Panasonic has PC input, that may be an option. As for enabling multiple displays, that should be covered in the video? Hehe, yeah, good nose owbist. I understand it's possible to report SPAM but I'm much too lazy. Forum needs a "Report as SPAM" button but I suppose it will probably never get it.

zep et. al.: Sorry I didn't get back sooner but with my limited experience, I was a little leary of doing the uninstall of network adapter. However I finally realized that at worst it would only mess up the laptop and not the other devices that are connected and working on the secured network. So: I just uninstalled and rebooted. The adapter did reinstall but I am still not getting a proper connection although things have slightly changed. The secured network got connected, but did not even ask for the security password and simply went to 'validating identity' and simply hung. It didn't even time out. I checked firefox to see if it was expecting a password there, as was the initial case to get connected to the Guest Network (where I am again now), but it couldn't find the server. You may recall, that previously the issue was that the secured net would ask for the password, but find it unacceptable and give 'limited or no connectivity. Is there a way to force the network to ask for the password?? Any other ideas? Eventually, I will probably find a way to get a knowledgeable person out to my house where they could diagnose this. FYI, I am creating another post about security updates that may tangentially be connected to this thread. I apparently successfully installed sp3 but 'security update' keeps wanting to install it AGAIN! I was worried I might not be able to shut down to reload the adapter, but I was able to cancel the update.