Brilliant answers, and I found the right demo and everything, but then realized that I am missing a few clips and wires. I thought I had found them all, but no such luck. I will see if Data Doctors has the pieces in stock, otherwise I can always purchase them from that website. Thanks so much!

Zep - I have 3 devices in my network list: 1) 1394 net adapter 2)intel 82566mm gigabit network connection (this one I was able to get an updated driver - but on my network connections, it still shows as local area connection - "network cable unplugged,fire..." and I'm not able to click that and get the rest of the sentence. if I click it it just gives me the name of the adapter. 3) intel wireless wifi link 4965AGN The first and third ones say they are connected and firewalled. I believe that this last wireless 4965AGN is the one that has problems and gets repaired. I could be wrong about that. The LAN one I think has always been unconnected/unplugged. I don't know what that's for or if I need it. Is that my wired internet connection? Thanks. Lynn. PS - if I go through network devices and select update drivers, it only offered updated drivers for the intel 82566mm gigabit network connection. Is there any point in googling for updated driver if this route indicate no new drives exist?

Hi, Mikie. Thanks. I guess I will look for a 1.5TB drive (unless I don't find any with very good reviews - I know I've seen some 1 TB drives that get great reviews for around $100). I know I have one open sata port (I did have my computer open last week to take my Tivo original hard drive and copy it to a new 1TB hard drive - with all the snafus this 1- 1/2 hr. project took 8 hours on Saturday - and on and off all Sunday to complete). There is definitely a bay for a second hard drive. I had 2 sata ports but just added an esata cable so I'm using one of those now. I definitely don't have such huge files (maybe 10-15GB at most for a long high-def movie), so I'll look into partitioning the drive (which is an intimidating idea now, but I'll work up to it). I'm not sure what you mean by break-away covers. But this computer comes with an empty slot in front where a firewire port can be. I think this is what you mean by does the faceplate have provisions for it. I've looked through Dell forums. I'm copying the link here: http://en.community.dell.com/forums/t/18748278.aspx?c=us&l=en&cs=04&s=bsd&PageIndex=1 It's amazing that for over a year folks have been trying to add this front firewire port after the face - and most of them cannot get a straight answer from Dell. The variety of responses - including it can't be done, it can only be added to the rear, a suggestion of different needed parts - and then perhaps one answer that seems right - but they got the part number wrong and it took the woman 30 minutes to find the information out. Anyway, I've read through it several times bc. it all seems to unclear. I wish I could have read that several people did the same thing and it worked. But people had different solutions. I think I'll call Dell parts and ask about this one: Part #J4975 ($32.99): * IEEE 1394 PCI Card (all internal cables included) for Dell Inspiron 530 Desktop * One end has FireWire port that will be accessible on front of computer (i.e., via the existing slot) * The other end is the PCI Card (which connects to the motherboard) and also has three additional FireWire ports accessible on back of computer. * Internal cables (included with purchase) connect the two ends. * All four FireWire ports have 6-pin heads. But even that part number is wrong - it's supposed to be Y4975. It sounds like the right thing to me. Then I can just plug in my Lego parts. Dell support is just so uninformed. Back to the hard drive, do I need to get cables as well as the drive? I'm sure I need 1 or 2 cables to connect the drive to my computer - and I'm asking in case that answer is more clear. Thanks. Lynn. PS - I'm not mechanical - but I'm determined to learn.

For sure you need to select the right output on your computer, in Windows that's often done by right clicking the desktop and selecting "Properties". In one of the tabs you can select an external monitor. Sound should work without changing any settings, try with a headphone first if your audio is switched on. About the RCA plugs: red and white are audio, yellow is composite video. Hope this helps at least a bit.