Loved #2, but no doubt you'll end up with something you love even more. We had our heart set on a house that was a foreclosure. Even got friendly with the next door neighbor and gave our number so she could call us as soon as the house was put on the market. She called the minute the sign went up outside and we put in the very 1st offer, and the bank told our realtor it was a good offer (and all cash at that) and we would be getting the house. Well it turned into a bidding war and we also couldn't keep up. We were heartbroken. But within 2 months we found our current home, which turned out to be even better and was a price we could afford.

LOL...I put her in the box, and on the wicker table and in the wicker chair. Putting her in an unfamiliar place is about the only time I can keep her still long enough to snap a picture!!

To Op- sometimes a cheaply made bypass door will lift off the rollers because of the thin glass the manufacturer used. I have seen doors with 1/8” glass. I never recommended anything less than 3/16, but preferred 1/4” or 3/8. For top of the line, I used 1/2”. Be sure you see and feel theses different thicknesses of glass. Physically, the bypass doors stay in the space because of gravity; they hang on the top track. Therefore, any lifting motion will cause them to come off. One solution is a heavier door. You might look at a 3/8” glass frameless bypass unit. The edges of the glass will be polished, the only metal is attached to your walls so you still have the clean look. In addition, this configuration does use any floor space as a swing/ hinge door does. Again, a good glass company with floor displays will be able to offer you options.

Why not raise the outlet to be up by the new switch location. Replace the BEP3 (3" base end panel) with a B9 or B12.....extend it down. Run your tile across and down to the floor/baseboard. If you don't like that idea, then put the outlet back between the window. What is the switch for? Drill an airswitch in to the countertop. You can use an airswitch for lots of things....not just a disposer. Another solution: Do an angled plugmold between the windows. Are you putting a wall cabinet back there? They will do one with a switch too. Or put the outlet and switch back....split it with him. I think he should eat it....but for $250...keep the peace.