There should be instructions with your printer if it is "wireless" capable. I am not familar with Epsons as I have HP, but I expect the procedure is similar. Before you begin, you will need two pieces of information: The network name of your Router/Gateway and the security code sometimes called password. The ID name might have the form "2 wire488"; the security key may have 8 to 12 digits. Often, the security key is on a label on the gateway/router. With these two pieces of information, enter the setup menu on your printer and turn on the radio or whatever it is called. Next, follow instructions to connect to your gateway by suppling the gateway ID and security code. If the instructions do not appear on yoru printer's display, get instructions from its manual. After the ID and security code have been entered, there will be a short delay while the printer and router establishes the wireless connection. Once the printer has been linked to the router, any device on your local area network (LAN) can send print jobs to the printer. However, the sending device must contain a driver for the printer. Once the link has been established, the printer should be able to retain this connection after being shut down and restarted at a later time. Optionally, the link can be turned off at the printer by entering its menu and turning off its radio. This frees the channel on the router. The link is automatically re-established when the printer's radio is turned back on.

jemdandy, I think you have some misconceptions. One wirelessly connected device produces no burden on a router, there's no need to switch off a radio if the device is connected and functioning as is. At times I can have 12 or more devices wirelessly connected to my network and you wouldn't know the difference. One consideration is that many wifi transceivers (routers) have a practical limitation in the mid-teens of MB throughput (like maybe 14-16 megs) and so those dozen devices can't all be streaming video before there's a slowdown or confusion. Nor would most people's Internet connections provide enough bandwidth to do that anyway. But at lower levels of sustained rates or bursts, like internet surfing, emailing, or streaming audio, there's no issue for any user, each would think they are the only one active on the network. Keep in mind that "wifi" is nothing more than the wireless signal connection to a network, it isn't something separate. A wirelessly connected printer is the same as one connected by wire, it can be set up to be visible to all network connected devices, no matter how they are connected.

pk, yes, frustrated is an understatement. Don't like spending so much time on such things that are probably easy. Did a lot of research with no resolve. Printer is hooked up to a desktop; DT hooked up to router. I don't "think" the printer is connected directly to router. Not sure what ethernet is. Laptop works wirelessly to the printer. Laptop is 8 mos old. Was working perfectly fine with printer until this new router was installed the other day. I have not tried plugging the printer directly to laptop. I'll try that in the morning. Brain is fried right now so I'll continue on this quest in the morning since I need the printer for work. Thanks for the help. Wonder if uninstalling the computer software from laptop, then reinstalling it again, will work.

It does not seem to be a network adapter issue either, as both wireless and direct connection are problematic. The next step to see if a program typically Anti Virus is causing issue. So lets boot the computer to safe mode with Networking and see if you can connect that way, lets just concentrate using a direct connection. Restart the computer, keep tapping the F8 Key, the computer will boot to the advanced boot options menu black screen with white letter. From the list presented to you, use the arrow key to select Safe Mode With Networking once selected hit enter on the keyboard. Now try to connect to only Google.com. Let us know if you can connect that way. Do not surf the internet in this mode. Please be sure to try another browser too maybe before doing all this above in case this is a silly internet explorer issue.. Joe