This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

For some reason several notifications popped up today that I never knew were on this thread or a couple others. I thought it may be helpful to some who may read through this (and reassuring to those who were concerned) to see in first two photos the watertight way the shower was structured, then in last two photos are the colors of grout/what I ended up doing (per my original purpose of posting this question on Houzz) : ^^^This red/pink stuff is the waterproof material that was put all over the shower/in niche/etc before the tile went on. And as I had mentioned in prior comments, a large curb was always the plan as you will see in this almost-finished photo :) *Note: The unfinished window is a reflection and not actually in the shower Finally, for those who looked at this thread in search for answers to their own questions about grout colors, I went with Tec Dove Gray Sanded Powergrout on the floor and niche (wherever the hex was), and Tec Silverado Unsanded regular grout on the walls with Powerboost added (to make the unhanded grout a form of Powergrout) on the walls...choosing the lighter gray to soften the bright white so that it would work better with the warm white vanity. The Powergrout has posed no issues whatsoever in the last month since the shower has been used. We did seal the floors/walls for additional mold/mildew/stain resistance. This is a good representation of what the colors of tile and grout look like in reality...the Dove Gray appears a bit softer in person though.

It's your house. Why not paint for you? Have fun with it. Don't be afraid to do something that brings you happiness. Enjoy! Afterwards, if you think the transition from your open spaces to the powder room is awkward, you can always keep the powder room door closed. You can always repaint for beige brown taupe safety boredom when and if you ever put the house on the market.

No relation to each other, as door knobs are interior hardware; bathroom faucets etc are interior fixings (permanently secured). You can choose any finish you want for the bathroom. The bathroom door, will have black hardware.