ff, You didn't mention if this is a new controller, installed by you or a contractor. Hunter does try to help you with your problems. Let us know what you find out. Link to Hunter support: http://www.hunterindustries.com/support/?f[0]=im_field_customer_type%3A61&f[1]=im_related_product%3A241 Contact info: http://www.hunterindustries.com/contact-us Aloha

I have a Pro-C. Not having any icon show above Friday is definitely strange. I'd reset the timer first since a reset is like drinking alcohol if you have a relationship problem - tends to solve everything :) Write down your programming before you reset it though it sounds like your program objective is very simple. I can't recall the reset procedure but it's in the manual. Your alternative is to have the program run every 7 days which is done separately from those water droplet things, initially setting up the program on a Friday. But I've always found that approach tricky (i.e. will it first start watering on the next Friday or the next Saturday).

The info on Delay is on page 22. I know this only because I have a manual. I'm dealing with my unit refusing to set time cycles for anything after Program A.....will not hold B or C and won't reset. I'm so frustrated I'm thinking of replacing it with a Rainbird. I have Rainbirds in 3 other places and they haven't failed in 9 years.

Hello Tom, Hunter Pro C controllers are awewome. The clock is warrantied for 5 years from date of purchase. You should be able to go back to the place of purchase or call your contractor and exchange the front section of the clock. If you dont know how old the clock is, open the clock and look for the date of manufacture stamp inside.