Sink cabinet size help!

4 months ago

I’m set on getting the 42” Stylish workstation sink: https://www.stylishkb.com/product-page/42-versa42-s-642w

Seems like the minimum cabinet size needed would be 45”.. should I use a 45” or a 48” cabinet for the sink?

I’m wondering about the 48” sink for longevity reasons. There are not a lot of 42” sinks on the market so 45” would be the next option & those need a 48” sink. Thoughts?

Hoping to create a kitchen cabinet layout that will stand the test of time and last for many many years.

48” sink cabinet

45” sink cabinet

Featured Answer

PRO

Debbi Washburn

4 months ago

The only reason I pointed out the size is because you had mentioned having a 30 and 36" sink before. I tell my customers to make sure the sink is large enough for their biggest pan or cookie sheet they need to soak. The second sink is a decent size, but make sure it fits you favorite colander or whatever you may rinse fruits and vegetables with. No use in that size if it can't accommodate what you need.

Other than that - Joseph gave you the best installation advice.

Good luck!

Sort by:Oldest

Comments (11)

PRO
DeWayne
4 months ago
Are you doing custom cabinets that have these extended size sink bases? Most stock cabinets do not have them. These large sinks carry a lot of weight. You have to have a higher end semi custom or full custom line to work with them.
HU-227031627
4 months ago
There are threads on here where it has been explained that you can stick a sink into a cabinet that is the same size (that is, 42" sink in 42" cabinet).

Your kitchen, but decide if you really need a huge sink or not. It can be rather overwhelming, particularly if it is a one-basin sink, and you lose counterspace (yes, I know about covers and cutting boards on workstation sinks--they aren't quite the same and can be annoying to store and have around). So, decide if you really need all those accessories and if you have a place to store them besides the sink.

I know the trend is fancy workstation sinks, but I'm not really a fan of the one that I have. I hate the grid on the bottom, and the drain is set on the right side of my sink. What happens is food particles collect on the left side and are harder to wash down to the right side of the sink to the drain because of the grid.

Ruvati has sinks that have a sloped bottom that seems to be a much greater slope than other competing brands. I haven't seen in person to confirm. I'd try to see the one you like in person first before committing.
Related Discussions
24' Sink Cabinet - What size sink?
Q
Comments (19)
Herbflavor is absolutely on the mark! Homework is ESSENTIAL! We found that sinks with seemingly equal measurements from different manufacturers have different minimum cabinet size requirements. We also discovered that if a particular manufacturer did not provide spec sheets for their product or their spec sheets were lacking data that other manufacturers provided, we steered CLEAR of that product. We settled on a Julien model with zero radius corners. It was on the high end of price, and ALSO on the high end of quality, service and ultimately our satisfaction! We are absolutely sure we made the right choice after doing all the research.
...See More
Help with size of small sink and needed cabinet
Q
Comments (3)
w/ a tall coffee pot, deep would be good--don't go shallower than 7". And get a faucet that goes up, but NOT back down, so you can get the coffee put under the spigot easily. My suggestion, take the coffee pot to Home Depot or somewhere and look at some sink depth and widths. A narrower sink will leave you less room to maneuver around an intrusive faucet. So the lower your faucet reaches toward the sink, the wider a sink you need.
...See More
Help with a sink base cabinet and apron sink
Q
Comments (20)
Problem solved! (For me anyway....might work for you too though.) I called Franke and they confirmed with their warehouse that the sinks are branded with their logo on the INSIDE of the bowl, on the right hand side of the sink. The photos that show the logo on the apron front are old and they have not been making them that way for a while. If you get it from homeclick.com, there is a 10% off Franke coupon through 7/18: FRANKE10 that makes it $810. That's the best deal I can find so I'm going to get it from them. Hope this works for you too!
...See More
sink size vs. cabinet size
Q
Comments (3)
I don't see any reason why a 30" sink wouldn't fit in a 33" cabinet. We're putting a 32" into a 36" cabinet. There is room to spare. If you find the bigger sink doesn't work, can't you return it for a smaller size? Hope someone with more install knowledge pops in. I advise you to go with at least the 18" wide prep sink. 15" is tight for some prep tasks. And 18" allows more space if you occasionally want to wash something out there if the clean-up sink is busy being used for something else.
...See More
M Miller
4 months ago
Have you seen these size sinks in real life? I am sorry I am not answering your direct question, but I wanted to advise you that before you get this setup, you see this size sink in person. When I see them in the showroom, I find them so big, and then too much surface to clean. I have a 33" sink and it's plenty big.
Lo
Original Author
4 months ago
Thanks all for the comments!

We’re going with semi custom cabinets so we should be able to get a cabinet this large.

I didn’t know that the sink can go in a same size cabinet - much appreciated for the info & I’ll have to look at that further!

We’ll have to try to see the sink in person.. it seems hard to find in my area but could be worth it. I’m also worried that the sink will be too big, but I’ve had both 30” and 36” sinks and never felt they were too large. Because it’s a split sink, I’m hoping we won’t have the same food particle issue but will keep that in mind!

Great things to think about from all of you!
M Miller
4 months ago
last modified: 4 months ago
If you cannot find a sink that size to see in person, take a large cardboard shipping box, open it up, then cut it to the same size as the sink you are considering - both length and width. Put the cardboard cutout on the counter in your kitchen and see how it looks. Actually, it would be good to do that even if you can see the sink in person in a showroom. It's always very helpful to see dimensions on site.
Lo
Original Author
4 months ago
Thanks for the tip! Since the sink is not really changing spots, I’ve already marked it off on the counter with tape! It’s not the same of having it fully blocked off so I will also try the cardboard idea!
PRO
Debbi Washburn
4 months ago
Make sure to take note - that sink has a 27 " bowl size for the larger sink. Is that enough for you?

A 45" cabinet is fine and so is a 48. Your installer should put an extra support underneath the sink since there is potential to load it up!
Lo
Original Author
4 months ago
Yes, the 27” on one side should be enough! What do you see it being too small for?

Okay thank you!
PRO
Joseph Corlett, LLC
4 months ago
Lo:

That sink will undermount in a 42" cabinet without any problems as long as the sink is strapped, not clipped or blocked, in place. Hercules Universal Sink Harness or a couple Sink Straps.

Sink manufacturers mistakenly believe you need room for fat plumber hands and screwdrivers to tighten clips. Strapped sinks do not need that room which is why a 42" sink undermounts into a 42" cabinet, a 36" into a 36" cabinet, etc.

I've never had a customer complain of a too-large sink and I've installed hundreds. Workstation sinks actually add counter space.
Lo
Original Author
4 months ago
Ahh that’s so good to know - thanks for the confirmation on the sink size!! And thanks for the support on the large sink & workstation sink! It’ll be a change for sure and it’s encouraging to know that I will not regret it!