Need help picking engineered hardwood to look good with Maple Cabinets
HU-488354256
9 months ago
last modified: 9 months ago
Featured Answer
Sort by:Oldest
Comments (12)
Related Discussions
Hardwood floor vs. engineered hardwood?
Comments (27)Choosing the right flooring type isn't enough for your living condition. You will have to consider the types of cut: flat sawn, rift and quarter sawn, quarter sawn or live sawn. Quarter sawn and rift & quarter sawn will be best choices, because expansion and contraction is along the thickness of the wood. You will need climate control all year round. 70 degrees at 40 % relative humidity is where you want to be throughout the year. The use of a humidifier/dehumidifier will be needed year round. Although, engineered flooring is more stable than solid. Using the wrong wood specie in your living condition can run the risk of de-laminating with engineered wood. If, the top veneer is more or less stable than it's core and backing. You will experience de-laminating in extreme humidity swings. Take in account of what the engineered flooring is constructed of: mdf or plywood. The width of the flooring will account for how much expansion and contracting also. 2 1/4" strips are the most stable. As you go wider, expect to see more wider seasonal gaps. Proper acclimating is critical, should be performed with a moisture meter. For 2 1/4" strip flooring , sub-floor and flooring moisture should be within 4%. For all other widths 2% moisture differentiation is allowed or should not be exceeded. Don't forget proper expansion gaps, which is the thickness of your flooring, example: 3/4" thick = 3/4" gap. Sub-floor type and condition will affect the performance of wood floors. All this needs to be considered for the proper and successful performance of your wood floors....See MoreHelp with Hardwood Color Selection (Engineered Hardwood)
Comments (30)Thank you HerrProfessorDoktor, I am glad you are letting others know about the issues you are having. It is too bad you regret the dark, perhaps you could restain them lighter in the future? I am very fortunate as I have had dark hard wood floors in my last house and plan to install them again in this house. I love the look and had no regrets last time with care so I think I will be okay. However, I do think it is wise of you to post as there are others who may not know the challenges of dark hardwood floors looking pristine. A rumba is always is a nice little feature to help with much of the dust. ~boxer Here is a great link / poll that talks about this topic. [light or dark hardwood[(https://www.houzz.com/discussions/poll-light-or-dark-hardwood-dsvw-vd~5047868?n=235)...See MoreWhat hardwood or engineered hardwood product best for concrete slab?
Comments (21)Leather is the most 'recognizable' pattern for cork (other than the ground up cork board look). When it is laid it looks like hardwood flooring using 'shorts'. It has a bit of a brick look to it. Ignore the 'pink' in the samples. The pink is the very first colour to fade away. It takes a few months for the pink to disappear but once it is gone the cork (Leather and Logan) will look more like oak in tone (yellowish with some hints of green and some gray). It is a 'directional pattern' which means it has a 'linear' sense to it. The Logan is the most expensive cork pattern you can get. The slices of pattern are random. They are hand cut and hand laid. It takes *roughly an hour for 1 person to arrange 10sf of the pattern. It is STUNNING. It looks more like stone. It is random...did I mention the pattern is random? Leather and Logan can have the extra 2 coats of the Loba 2K Supra AT = super tough. The Latte is a FANTASTICLY tough finish. It has the polypropylene finish on it. This is the 'non-vinyl' product Cancork sells. It is tough....right after that it is SUPER TOUGH. And then for good measure, it is TOUGH!!! For a Rental property, the Latte is a product I would recommend. It does NOT need the Loba product. That means you save $1.50/sf RIGHT AWAY. It can handle 3mm or 6mm cork underlay. If you are looking for temperature control, then I like the 6mm underneath...but CHECK your door heights, etc. All you need to do is take your floor sample and the underlay sample they sent you (their supposed to do that...sigh) and see if it 'slips' underneath the doors in your home. It is that simple. I hope that helps... As for the Tacoma...I'm guessing you are looking at KILOGRAMS (700 kg) as your weight limit = 1540 lbs. The weight of a standard skid of cork flooring = 1000sf (ish...depends on the product) = *roughly 2000 lbs. And the skid sizes are PERFECT to fit between the wheel wells of a truck bed. I've watched this stuff get loaded into pick-up trucks for 6+ years. A forklift operator can drop that baby into your truck (so long as you do NOT have a 'cap-it') and off you go. If you only have a short way to go, the 2000 lbs won't be much of a problem...I just wouldn't do a trip to Bella Coola with it. ;-)...See MoreLVT, Pre engineered hardwood or hardwood
Comments (20)I don't think the hardwood from today is nearly as good as the hardwood from even a few decades ago. I have small dogs - both less than 20 pounds. But they're young, like to play, and they've left some pretty amazing scratches and skitter marks in the hardwood - in 2 different homes. Yes I keep their nails trimmed, they get a quick dremel every week. The old floors were site finished oak hardwoods. And there were spots where the scratches were getting pretty bad. The one house in question is in a beach town, so between the dogs and the sand, the floors were very scratched up. I deliberately chose a wood look LVP and it's held up incredibly well, but no one will mistake it for site finished hardwood either. I have engineered wood in my primary home - and while they've scratched that up too, it's somewhat less noticeable because it's a matte finish, and it's pre-finished engineered, which I've heard may be somewhat harder....See MoreHU-488354256
9 months agoHU-488354256
9 months agoPatricia Colwell Consulting
9 months agoHU-488354256
9 months agoacm
9 months agoHU-488354256
9 months agolast modified: 9 months agoCarrie H
9 months ago
Related Stories
COLORPick-a-Paint Help: How to Quit Procrastinating on Color Choice
If you're up to your ears in paint chips but no further to pinning down a hue, our new 3-part series is for you
Full StoryCOLORPaint-Picking Help and Secrets From a Color Expert
Advice for wall and trim colors, what to always do before committing and the one paint feature you should completely ignore
Full StoryARCHITECTUREHouse-Hunting Help: If You Could Pick Your Home Style ...
Love an open layout? Steer clear of Victorians. Hate stairs? Sidle up to a ranch. Whatever home you're looking for, this guide can help
Full StoryPRODUCT PICKSGuest Picks: Beautiful Things You Can Feel Good About Buying
Upcycled, ecofriendly or just made responsibly, these home accessories and furniture pieces will keep your conscience clear
Full StoryMATERIALSWhat to Ask Before Choosing a Hardwood Floor
We give you the details on cost, installation, wood varieties and more to help you pick the right hardwood flooring
Full StoryGREEN DECORATING8 Questions to Help You See Through Green Hype
With the ecofriendly bandwagon picking up some dubious passengers, here's how to tell truly green products and services from the imposters
Full StoryKITCHEN CABINETSWhat to Shop for in Cabinet Hardware and Millwork
Learn about finishing touches for kitchen and bath cabinets to pick the options that will work best for you
Full StoryKITCHEN CABINETSPainted vs. Stained Kitchen Cabinets
Wondering whether to go for natural wood or a painted finish for your cabinets? These pros and cons can help
Full StoryWHITE KITCHENSWhite Cabinets Remain at the Top of Kitchen Wish Lists
Find out the most popular countertop, flooring, cabinet, backsplash and paint picks among homeowners who are renovating
Full StoryMOST POPULARFrom the Pros: How to Paint Kitchen Cabinets
Want a major new look for your kitchen or bathroom cabinets on a DIY budget? Don't pick up a paintbrush until you read this
Full Story
apple_pie_order