Has anyone used the Euro model yet? If so, how is it? The TapMaster site says you can push the lever in any direction...left, right, push in, pull out...and it will work. You're only limited to left/right if you want to lock it "on". Now that I finally installed my NeverMTs, I'm ready to tackle the TapMaster battle ($296 @ Conservastore)...I want one for my prep sink, at least. (I suspect once my DH sees how nice it is to use he'll want one on the cleanup sink as well...) So, any input on the Euro style is welcome! (The cabinet door one is out since I sometimes lean on the sink cabinet doors w/my knees while working at the sink.)

If you think the California Faucet's matte white finish would be an improvement over the current bonnet cap and possibly blend, then I wouldn't hesitate to contact them and ask what it would cost to have them repaint one of the replacement bonnet cap pieces you received with their matte white. I'm not sure how they operate: if they do one-offs with their coatings or if you would need to wait for a production run of other matte white pieces. For example, with my kitchen renovation, I ordered some Belfer recessed light fixtures, and the manufacturing system involved powder coating per piece. Normally the turnaround time would have been a few weeks for that, as they sent pieces to the powder coating contractor only as they were ordered by customers, but the powder coating schedule had been slowed down by pandemic restrictions, so it took about 4 months for me to get them. That's why I mentioned sending one of the replacement bonnet caps you have so you can still use the faucet in case it takes a while for the coating. Brizo doesn't actually use powder coating to apply its finishes. Its process is more robust, but I wouldn't be surprised if California Finishes has a process that is less technical being a smaller company and with some of the finish flaking problems I have read about with them. The bonnet cap is likely to be more protected than other parts of the faucet, however, so as long as the plumber can get it replaced without damaging anything else, it might be worth a try to see what California Faucets could do for you. Another thing to keep in mind is that you've only had this faucet for a few months, and I've read so many reviews about Delta's and Brizo's touch technology faucets failing after a relatively short time that I might be hesitant to drop money into a custom paint of the bonnet cap. A popular product on some of the older Houzz posts, especially way back when people were posting under the website GardenWeb before it merged, was a third-party foot lever that turned a faucet on and off. People back then loved this! While I think products like that still exist, they have been largely made obsolete by built-in touch technologies. Just be aware that the faucet may not last as long as it would otherwise without the smart touch feature. Yes, Delta/Brizo will probably send a replacement part to fix it if it malfunctions, just as has already been mentioned in this thread, but at some point you may want to evaluate whether you would like to continue paying a plumber to repair a faucet on which you may or may not have been able to resolve the color discrepancy. My Brizo faucets have regular handles without touch features, a decision I made after reading touch technology reviews, and I have become adept at operating them with a thumb or pinky finger in order to minimize contact with wet hands. I also use a sponge to wipe down any water that gets around and on the faucets after each kitchen session. There may be no going backward for someone who has used and likes touch technology, but if you do need to make another kitchen faucet decision in the future, you may want to do more searching at that time to see whether the longevity of touch technology products has improved. Looking again at Jason Wu for Brizo products online, it seems to me that you can almost see that darker finish on the bonnet cap in the promo photos. I don't know if that's just shadow or if it is a paint defect in the prototypes. Whatever the case, it's a terminal aesthetic flaw in the faucet. I'm sure plenty of people have called in about this problem before. It is frustrating that Brizo hasn't taken steps to fix it since it's just that one piece on the faucet, apparently. I'm so sorry you are dealing with this. If you do find a solution, you might want to start a new post for "Jason Wu faucet color defect" here at Houzz with some photos to make it easier for other people with the same problem to find out what to do.

In the laundry room, I have el cheapo delta/American standard/not sure what brand with locking spray with black rubber like button for toggling back and forth between spray and stream. I have had various other cheaper standard pull out faucets with large faucet heads in my old kitchen. When one bit the dust, i would replace with another... The kind you get at Home Depot. They all functioned similarly. I now have a KWC Ono with locking spray in my new kitchen. El cheap one has a better spray function with wider spray capture area because the faucet-head is so much bigger. It's like a bigger shower head versus smaller shower head comparison. Unfortunately, the Delta and its esthetic equivalents are clunky and crass in appearance when compared to the sleak lower profile faucet heads that I wanted to put in my kitchen. I LOVED the look of Dornbracht faucets but they did not come with pull down spray/faucets. I really wanted a lockable spray faucet. I settle on a KWC. Grohe Minta was my runner up. However, some people may prefer the smaller area that the water is coming from. The water is directed straight down on the KWC with say 20 degree of spray and the bigger faucet heads has more side direction with wider spray with 45 degree spray area. This makes a difference when you are rinsing vegies or dishes under the spray stream. I LOVE my Ono for its sleek look. Even so, the spray function is not nearly as nice as the faucets that cost 1/2 to 1/3 less, IMHO. I have this faucet with matching soap dispenser. Here is a link that might be useful: KWC ono

I ended up here, because I'm redoing my kitchen and trying to make a decision about the faucet. I have various faucets throughout my house from Kohler, Moen, Restoration Hardware, and Newport Brass. I think the Restoration Hardware fixtures are made by Newport Brass, because we had to call them when we needed to replace. We've had them from 10-12 years, so I don't know the styles or even if they are made. Almost all are polished nickel, and the Kohler and Moen are always spotless, laundry room and bathroom, respectively. I'm not crazy about the pull down sprayer on the Kohler. The Moen Showcase (do they still make this line?) is in the bathroom, and I love it so much, because I can just pour water over it and it will dry spotless. It's amazing. It is wall mount, and I wish I had it in every bathroom. Because of my success with Moen, when I needed a faucet for my kitchen, I bought an inexpensive (relative to all the other faucets I have) Moen at Home Depot. It is the only non polished nickel faucet I have. It is stainless steel, still looks brand new (10 years+), and the pull down sprayer works wonderfully. Unfortunately, I'd never buy fixtures from Restoration Hardware again. They spot like crazy. The Newport Brass are slightly better, but they also spot. I'm looking at Kohler and Moen for my new kitchen, but the choices are limited in polished nickel. Now I'll look at California Faucets, too, but I'll skip Rohl, since someone mentioned the polished nickel spots so much.