Lenore, who is installing the granite slab shower? Start there and make your priority be hiring a VERY experienced tile professional - one you have vetted carefully to insure that their qualifications meet your design requirements and product selections. Stone slab installations are not for the B team, and especially in a wet area. Can it be done? Yes, depending upon the structure over which a solid surface stone is installed and the methods used. We install solid surface shower walls regularly, but from an empty cavity which we build to meet all specific design and installation specifications, including the pan. A solid stone slab cannot be supported by the pan (it is not meant to support a slab wall). A slab wall is pinned and tied so it is self supported, not supported by a pan. This is a very complex installation. A LOT to consider. As one example, the thickness of your slab? 2cm. 3cm? (effects the weight load on the space). And I could go on. After you have carefully vetted the qualified tile contractor, have this conversation with them. If you question or want to clarify their recommendations, check back or seek professional advice from other qualified sources. Please consult with a professional onsite. Good luck with your project.

Until this past Saturday when I talked to a general contractor doing a neighbor's kitchen, I was all set to have laminate installed. I had already did the preliminary work of getting my space measured and all I needed to do was 'make he call'. When the GC told me the cabinets would literally fall apart when demolition started(I have tile)I thought I would have to leave the gross '80's tile. While going over the whole scenario with my daughter, she told me about a product she saw advertised at the mall that goes right over the existing tops. The company is called Granite Transformations(http://www.granitetransformations.com/home.html)and is a granite/resin combination. I had a rep out today and here's the scoop: A layer of luan is used on existing tops, some of the tile is 'knocked down' to accommodate the stove and sink, and then the product is installed over the top. Let me tell you, this stuff really looks like granite, but less upkeep, with no sealing involved, and can withstand temps up to 600+(??) degrees. It's an Italian product, and was first used for floors. Yes, it costs more than laminate, but I would need someone to come in and demo, repair walls, disconnect drains, dishwasher, disposal, put in new sink, and then re-install the whole shebang, but I won't need all of that, and they'll disconnect. The laminate plus the 'extras' would have been almost 3 grand. It will cost a little over $4 grand for the granite-like surface. Tomorrow will be decision day. ;o) patty_cakes

I keep revisiting this thread, hoping for a Sign. :) Is it ever acceptable to use a shower pan and create a tile threshold over it, thereby making it higher? As for cleaning the nonskid elements of a shower or tub. I have some wonderful nonskid strips in my otherwise very slippery acrylic tub where I take my showers. Yes, they pick up and hold grime a little too well and you can't just go gangbusters cleaning acrylic. The other day I used some Softscrub and a curved nail brush that fits around a couple of fingers. With very little elbow grease ALL the grime was removed and the shape of the nail brush is very ergonomic.

Hi Sochi and Kristin, gorgeous wallpaper projects! I am in correspondence with several Italian fiber glass wallpaper suppliers now and all of them have different waterproofing methods. The main issue I am finding is that the substrate needs to be white in color and smooth. Sochi mentioned the contractor used Schluter KERDI-BOARD but it is orange, so how did you eventually get it white? Krisitin what did your contractor do for substrate? What products were used to waterproof the wall before the application of the glue, wallpaper and sealants? My other concern is that the drywall or cement board (depending on what to use) has to sit on top of my shower pan so I fear it will absorb water is not properly waterproofed. Any guidelines and suggestions will be highly appreciated. Alex