Effed-up kitchen counter install — whose fault is this?
larahale
2 years ago
Featured Answer
Sort by:Oldest
Comments (31)
HALLETT & Co.
2 years agoRelated Discussions
granite counter-top seams ... are we being too picky?
Comments (44)These are my pics of my countertops placed Friday June 22, 2018. I cried looking at these seams. It looks so cheap. Fabricator explains that's the way it comes. I explained that I shouldn't be able to see the seams so clearly. It looks so unprofessional. They ended up taking them back to their warehouse. In hopes they say if it is quality control will try and fix it just to make it look better. Otherwise I will have to pay an additional fee for them to come out again to install. I just don't know what to do and if still looks the same. This is the first time I've replaced my counters in 24 years. I don't and can't live with it. looking at this for another 24 years. It looks so cheap and it really was not it's a lot of money to me. I hope fingers crossed that they will fix this problem. They never told me that there would be such seams. I thought the edges were done by a machine and it would be all one piece. I have read up on this and now understand there are seams. But now I do know that they should not look like this. If they are good fabricator you shouldn't be able to see them so clearly. I will find out next week what happens....See MoreCostco Kitchen Countertops VS Home Depot Countertops
Comments (42)Thanks so much for all of the information My biggest concern is that in as much as I am wheelchair bound I can't even take a countertop measurement myself and after 2 phone calls to Costco's " My Countertop " + 2 emails to their subcontractor in a month's time......I have given up on Costco and don't want to use a subcontractor who obviously has so little interest in doing a countertop for me I just want somebody in Suffolk/Nassau County who will do a good job installing my countertop. I am not looking to " nickel & dime " anyone on price but I don't want to get anyone who will " nickel & dime " me either. I would love to find somebody who will do the entire job well ( including removing & discarding old countertop & sink and installing new countertop & sink ) I would also like to find someone who is willing to come to my house...take professional measurements ...discuss my options to me....make suggestions if needed and show me various samples I don't think that's too much to ask and I hope that there is a good fabricator out there who could do it all for me which I will gladly pay for...See MoreI'm so frustrated! Quartz counter-top installation problems again
Comments (51)Here are a some pics and my dilemma. Keep in mind this is my old fridge...new one comes today! Here is how we ended up with this: I have never had an enclosed fridge so didn't think about the peninsula dying into panels or how deep panels were going to be. I "semi" designed the new footprint and took it to Lowe's where the KD took over. (yes---I know......) Bought Schuler plywood with maple fronts cabinets. Although the kitchen designer had the model number of the fridge we were buying, which is a full-size, she designed the kitchen with 24" deep panels. She knew I was trying to have the look of an enclosed fridge. Being that I've never had an enclosed fridge, it was something I just didn't think of until the install started. Evidently she put a counter-depth in the design program because the elevation sketches she gave me showed an enclosed fridge. "Luckily" the panels actually came in wrong and were cut at only 23" for some strange reason and the installer caught it right away when looking over everything. Otherwise he probably would have installed them and I would be stuck. So called Lowe's to reorder the panels and somehow in all this it suddenly dawned on me that a full size fridge was going to be deeper and require deeper panels. I thought "no problem! Yay I can order them at 30!" By this time the KD had quit her job due to the pandemic. The other KD didn't know what was going on so we called in the Schuler rep. She was the one who immediately told me that those 30" panels would be sticking out in front of the peninsula. She asked if we could move the peninsula forward since the other side is an overhang for seating, but we couldn't since it would bottleneck the entrance into the kitchen down to under 36" and getting rid of an existing bottleneck was one of the reasons for the re-design to start with. So we had a dilemma. We cannot go down to a counter depth fridge which was the other option. What I decided was to split the difference and order 27" refrigerator panels. The fridge without doors is 29.5" so I will have about 3" of the side of the fridge sticking out which I don't like, but while I want my kitchen to look beautiful, I value the functionality too. The old fridge that you see in the pic sticks out a total of 32" The new fridge will stick out 34 with doors but without handles (4.5" of that is doors that would stick out anyway) Here's the really complicated part....we will be installing decorative panels on the end of the fridge as we have them on all the cabinets. This is how you enter the kitchen and I don't want that big blank space there next to the peninsula. The panels should be installed with just 1/4" reveal. I posted a photo below of how the panels look that are already installed on the side of the pantry that adjoins to a 17" high window seat. Luckily those face the opposite way from the fridge panels so you will never see both at the same time. I also posted photos of us holding up panels on the side of the fridge (they are NOT the right size panels...we have to order those still---we just used these to look at the right edge as to how wide to make the panels.) Also keep in mind we can remove the quartz backsplash piece if that would look better. That was not originally planned...the panels were going to sit directly on top of the countertop. So do we order the panels with just the 1/4" reveal to match the panels in the rest of the kitchen? Or, as the Schuler rep recommended, order the panels so they are the same width with the countertop, leaving about 1 3/4" reveal on the right side, but then your eye follows the countertop all the way up. I asked the countertop templater guy if I should just lengthen the overhang on the kitchen side of the peninsula to 2.5" to bring it out to within 1/4" of the fridge panel but he said no....I'm now thinking I should have insisted on it. Especially since we have full overlay cabinets that already make the overlay look very small since the 1.5" planned overhang is measured from the box, not the front of the drawers. Note how small the overhang looks to the drawers. And then of course, they had templated for a 1.5" overhang and I only got 1.25" UGH! Every quarter inch there would have made the reveal on the side of the fridge less. Suggestions appreciated! I'm hoping that I will eventually make peace in my mind with this issue and won't notice it but it is driving me crazy right now. I think of all the things that screwed up just because of this one error by the KD that I didn't catch and I am beating myself up for it!...See MoreDevastated over Cambria USA Counter Top Brittanica
Comments (39)It looks very fresh and new. You can absolutely tie them together well and it will look fabulous. I know how hard it is to have a vision in your head, and then how sad it is when what you end up with doesn't match the picture in your head. But I'd recommend trying to regain some perspective. No one has died, it's done well, and it's going to be beautiful. There is no way in heck I'd pay money to rip that out and start over. However everyone is different with money and I'm sort-of cheap. I save forever for major projects like this and I've learned one has to be willing to roll with the punches on a major reno. Stuff always takes longer, costs more, and looks a little different than what I saw in my head.......See Morepalimpsest
2 years agolast modified: 2 years agolarahale
2 years agolarahale
2 years agoloobab
2 years agorebunky
2 years agotaliaferro
2 years agolast modified: 2 years agoJAN MOYER
2 years agolast modified: 2 years agoJoseph Corlett, LLC
2 years agopalimpsest
2 years agobry911
2 years agolarahale
2 years agoAnna (6B/7A in MD)
2 years agoJAN MOYER
2 years agobry911
2 years agoLorraine Leroux
2 years agolarahale
2 years agoThe Kitchen Place
2 years agoThe Kitchen Place
2 years agolast modified: 2 years agopalimpsest
2 years agorebunky
2 years agoSabrina Alfin Interiors
2 years agoJeffrey R. Grenz, General Contractor
2 years agobry911
2 years agolast modified: 2 years ago
Related Stories
KITCHEN BACKSPLASHESHow to Install a Tile Backsplash
If you've got a steady hand, a few easy-to-find supplies and patience, you can install a tile backsplash in a kitchen or bathroom
Full StoryKITCHEN DESIGNKitchen of the Week: Traditional Kitchen Opens Up for a Fresh Look
A glass wall system, a multifunctional island and contemporary finishes update a family’s Illinois kitchen
Full StoryPETSHow to Install a Dog-Washing Station
Find out the options for pet showers and bathing tubs — plus whom to hire and what it might cost
Full StoryCONTRACTOR TIPSContractor Tips: Countertop Installation from Start to Finish
From counter templates to ongoing care, a professional contractor shares what you need to know
Full StorySMALL SPACES10 Tiny Kitchens Whose Usefulness You Won't Believe
Ingenious solutions from simple tricks to high design make this roundup of small kitchens an inspiring sight to see
Full StoryKITCHEN DESIGNNew and Old Mix It Up in a Historic Farmhouse Kitchen
A couple rethink the kitchen in their Pennsylvania farmhouse to restore authenticity while also creating a space for modern living
Full StoryKITCHEN DESIGNKitchen Counters: Stunning, Easy-Care Engineered Quartz
There's a lot to like about this durable blend of quartz and resin for kitchen countertops, and the downsides are minimal
Full StoryKITCHEN COUNTERTOPSKitchen Counters: Granite, Still a Go-to Surface Choice
Every slab of this natural stone is one of a kind — but there are things to watch for while you're admiring its unique beauty
Full StoryCOLOR10 Pair-Ups for Black in the Kitchen
Combine black with other colors to add drama, polish and modernity. It also can make a kitchen look more spacious
Full Story
larahaleOriginal Author