Why not? What kind of caulk are you all using that doesn't peel up with a minimal effort? I want that! Dork, if you don't want to glue your range in (and of course you don't! You just want to keep crud out of the crack), use whatever it is I keep using on my icky old kitchen sink--kitchen 'n' bath caulk. It comes right up whether you want it to or not. But normally nothing goes in the crack. If you DO go rogue and caulk it, TEST the caulk on a counter sample to be sure it won't leave a stain and that it can in fact peel off when it's time to refresh. As far as counter to cabinetry panels by the fridge, I personally (and probably incorrectly) would caulk it because I do NOT want spills dripping back there. Yeah, I'm a rebel. But we're not talking heavy duty stick-it-down caulk. Just the wimpy cheap stuff.

Here are a some pics and my dilemma. Keep in mind this is my old fridge...new one comes today! Here is how we ended up with this: I have never had an enclosed fridge so didn't think about the peninsula dying into panels or how deep panels were going to be. I "semi" designed the new footprint and took it to Lowe's where the KD took over. (yes---I know......) Bought Schuler plywood with maple fronts cabinets. Although the kitchen designer had the model number of the fridge we were buying, which is a full-size, she designed the kitchen with 24" deep panels. She knew I was trying to have the look of an enclosed fridge. Being that I've never had an enclosed fridge, it was something I just didn't think of until the install started. Evidently she put a counter-depth in the design program because the elevation sketches she gave me showed an enclosed fridge. "Luckily" the panels actually came in wrong and were cut at only 23" for some strange reason and the installer caught it right away when looking over everything. Otherwise he probably would have installed them and I would be stuck. So called Lowe's to reorder the panels and somehow in all this it suddenly dawned on me that a full size fridge was going to be deeper and require deeper panels. I thought "no problem! Yay I can order them at 30!" By this time the KD had quit her job due to the pandemic. The other KD didn't know what was going on so we called in the Schuler rep. She was the one who immediately told me that those 30" panels would be sticking out in front of the peninsula. She asked if we could move the peninsula forward since the other side is an overhang for seating, but we couldn't since it would bottleneck the entrance into the kitchen down to under 36" and getting rid of an existing bottleneck was one of the reasons for the re-design to start with. So we had a dilemma. We cannot go down to a counter depth fridge which was the other option. What I decided was to split the difference and order 27" refrigerator panels. The fridge without doors is 29.5" so I will have about 3" of the side of the fridge sticking out which I don't like, but while I want my kitchen to look beautiful, I value the functionality too. The old fridge that you see in the pic sticks out a total of 32" The new fridge will stick out 34 with doors but without handles (4.5" of that is doors that would stick out anyway) Here's the really complicated part....we will be installing decorative panels on the end of the fridge as we have them on all the cabinets. This is how you enter the kitchen and I don't want that big blank space there next to the peninsula. The panels should be installed with just 1/4" reveal. I posted a photo below of how the panels look that are already installed on the side of the pantry that adjoins to a 17" high window seat. Luckily those face the opposite way from the fridge panels so you will never see both at the same time. I also posted photos of us holding up panels on the side of the fridge (they are NOT the right size panels...we have to order those still---we just used these to look at the right edge as to how wide to make the panels.) Also keep in mind we can remove the quartz backsplash piece if that would look better. That was not originally planned...the panels were going to sit directly on top of the countertop. So do we order the panels with just the 1/4" reveal to match the panels in the rest of the kitchen? Or, as the Schuler rep recommended, order the panels so they are the same width with the countertop, leaving about 1 3/4" reveal on the right side, but then your eye follows the countertop all the way up. I asked the countertop templater guy if I should just lengthen the overhang on the kitchen side of the peninsula to 2.5" to bring it out to within 1/4" of the fridge panel but he said no....I'm now thinking I should have insisted on it. Especially since we have full overlay cabinets that already make the overlay look very small since the 1.5" planned overhang is measured from the box, not the front of the drawers. Note how small the overhang looks to the drawers. And then of course, they had templated for a 1.5" overhang and I only got 1.25" UGH! Every quarter inch there would have made the reveal on the side of the fridge less. Suggestions appreciated! I'm hoping that I will eventually make peace in my mind with this issue and won't notice it but it is driving me crazy right now. I think of all the things that screwed up just because of this one error by the KD that I didn't catch and I am beating myself up for it!

Her big splurge, the BlueStar platinum 48... I love our Bluestar. It's an amazing range. Would absolutely buy it again in a heart beat. But a 48" Platinum would be unlikely to be anything I'd normally recommend. That model is all about looks and not really that great for functionality. I understand about splurging. But if I spend all that money, I'd want it to actually be something I like to use. The 25kBTU Platinum burners are fun (we have one of those in our range), but the 22kBTU burners of the RNB are very similar; if this is the only reason for the Platinum, then it doesn't really justify the much higher cost. The griddle on the RNB is IMHO a better design. Can't comment on the grill, but I personally don't think an in-door grill is a great option anyway. The fancy oven burners in the Platinum are great for faster pre-heating, but are overall a more questionable design than the more traditional burners in the RNB. A 48" range is much less ergonomic than a rangetop plus wall ovens. The venting requirements for a 48" range are crazy. You need somewhere on the order of 2000 CFM, which means a loud expensive vent hood, a very complex make-up-air system, and no upper cabinets. Unlike a 30" range, a 48" range doesn't have spacers in-between the burners. So, you will need to put the grill or griddle in the center between the burners. Otherwise, your burners are too close together and you can't ever use big pots. But with the grill/griddle in the center, you have to always walk a long distance left-to-right when using more than one pot. Alternatively, you can decide for eight burners and no grill/griddle, but I have yet to hear of anybody who can actually keep all eight burners in active use. Again, a more reasonably sized rangetop and wall ovens work better; the wall ovens can be used for simmering much more evenly than any hobs. We have four hobs and three ovens in our kitchen. I use all three ovens every so often. But I can't remember the last time I used more than two hobs. I wouldn't have any idea what to do with eight of them.

GC agrees and is fantastic - I use them on every project. My post was to get some objective viewpoints because after looking at it for a week straight, I've lost perspective on the two options. Faced with an option to just "accept it and move on" as live_wire stated is appealing on one hand because we are several weeks behind schedule (COVID supply chain issues) and without even basic use of the kitchen for 10 weeks now - so the thought of just plowing forward and getting this done is enticing. However, we did pay a premium for an upgraded feature from a reputable and experienced fabricator...having to look at something that is "a solid B" when that isn't what we paid for nor were promised, and doesn't match the quality of the rest of the project will probably irk me to see each time we walk into the kitchen. Again, was looking for some perspective on if this is acceptable or poor from professionals or people with more experience with mitered edges than myself. The chastizing over the inherent pitfalls of renovation and "overdone fad features" really is just white noise - this isn't my first or even 10th reno, but I'm also not a stone fabricator. But then again, who doesn't enjoy armchair quarterbacking other peoples' projects from behind a keyboard? 🙂