Thanks- I'll pick up a few and play with them a bit. My next batch of door backs turned out pretty well, maybe I wasn't back brushing hard enough on the other doors, or went too light with the foam roller to begin with which does leave those darn bubbles. I think I was just so nervous working on a real set of doors that I might have been too tentative. We really want this to look good and last- I don't like doing things half-way. I appreciate your help!

I painted mine in about 5 days. It was new construction so nothing was hainging on the wall yet. The only section I did in place was the island. I did everything outside on sunny days. First I primed with SW and a sponge roller (on bare wood). That dried very fast, within 10 minutes. Then used a spong roller and SW self leveling paint for 2 coats. Let everthing dry and installed. It was very easy. Here is the kitchen to get an idea of how many cabinet were done in that length of time.

This is the kitchen that has been in my brain for at least 10 years, and here you have gone and done it perfectly!!! I'm going to Pinterest the bejebbers out of it as inspiration photos for the coming renovations (as soon as I finish all these pesty bathrooms!). Seriously, I have wanted a 4 oven Aga plus a module for ages. I already have the full 601 fridge & freezer (so a little bigger than your Subzero.) And I plan to put a big barrel hood over it all. And you have a big island with not huge aisles! And you have soapstone! I really think we're channeling the same frequencies. I'm totally in love with your butler's pantry! We didn't inherit one, but I may use the cabinet sliding door idea for the walk-thru pantry I'm planning. It solves my problem of a tight space and not really wanting all open shelves! Ok, I'm off to study this kitchen more deeply! Truly, I know this reveal is several years past now, but wow just the same! Great job! Always ;-) Hunzi

Select the metal clad wood window product for long lasting durability. The metal can always be repainted in the future (just like the fiberglass or wood). In CO, we can expect a quality exterior paint finish on wood to remain protective for approximately 2-8 years, depending on sun exposure. However, the sun exposure aspects are more intense at our mountain elevations than in TX. Another very important consideration in the clad-wood vs. all-wood window discussion is the additional structural integrity offered in a properly designed clad-wood window. The extruded aluminum acts as a component to adding strength to the wood joints (particularly in the sash construction). Marvin is a very well designed product when the proper use of cladding is considered, as is Eagle and Kolbe. Fiberglass window construction shouldn't even be considered, unless the discussion is in regards to energy efficiency; Plastics and fiberglass conduct much less, but are also not as durable as metals. Additionally, metals will paint just as easily as fiberglass or wood. Your concern about being stuck with a paint color, when choosing clad-wood windows, is unfounded. The only disadvantage to field-painting clad-wood windows is that the paint will degrade in the same time frame as painting an all-wood window, so you would lose the "low-maintenance" benefit of the clad-wood window after you have decided to change the color in the future. Consider the added structural integrity offered by some clad-wood windows, and the fact that the all-wood windows are likely the same price as the clad-wood. If there is a difference in price, think of the cost savings each time you don't have to paint your clad-wood windows, until that time comes when you decide to change the color. Select the clad-wood windows, if repainting is your only concern.