Perfect timing for me, this thread. We've replaced our 2'x11' kitchen bench seating area (termite damage -- caught early, but still...), and I just finished priming with Stix. In all my reading, I didn't anticipate how thick the primer would be, fresh out of the can -- my stir stick, jammed into the primer, stood at attention without issue! I contacted INSLX customer svc and was told I could thin with water. I did so, but it was still too thick to level well (I didn't want to exceed the amount of water recommended). I had to sand a fair bit to knock down the ridges. (I've repainted every door, spindle, baseboard and trim in this 26 y/o house of ours by now, using Lowes' American Tradition semi-gloss, and always got a smooth finish.) I have a can of Cabinet Coat at the ready, but am concerned about obtaining a flat finish: foam roller vs quality brush. How does one keep a wet edge when painting such a large swath, even if the paint levels well? (And I've read CC dries rather quickly.) I'm crossing fingers that CC will be the proper consistency (after a good stirring), so I won't have to worry about buying an extender (such as Floetrol or whatever INSLX might recommend). Whizz high-density foam rollers were recommended on one DIYer's site. Though, she was painting only cabinet door surfaces and wasn't dealing with the surface area of a wall-to-wall bench.

Thanks for the feedback on the curtains. It sure is easier for me to do....nothing! Of course my dog has already managed to get tangled up in one and pull the entire thing (including rod) off the wall. And in less than 48 hours since hanging too! Thats gotta be some sort of record. Hopefully that doesn't happen again. Geokid, I wanted it your way too, and when we moved in tried to get it set up this way. I was vetoed and since I got to pick placement of every other room, I didn't argue too much. I can't recall the problem....maybe the dresser didn't fit on that wall? Some weird feng shui thing? nosoccormom - that light will likely be replaced with the oh so functional but not always attractive ceiling fan when we get around to it. It's close to a 100 year old house. It's been remodeled/rehabbed but not quite sure of how well it was insulated and how HOT it will get up there. We have lots of pretty windows, but they probably won't help much. Thoughts on a chair? It will obviously have to be small. I would love a pop of color over in that corner (I like color) but am not confident that I will find one that matches the rug. So how would another color like coral look? Too much?

I may be replying to an old post...having a white dilemma! Moving to a new home soon, and I need to choose a white for the painter soon! I used BM Cotton Balls in my current home in 2 bedrooms, one is north facing and the other is south facing. worked well...nice and bright but not stark, however the hallway to the rooms look beige, which I am not fond of. New home has both north and south exposures + a hallway without a lot of light. Considering Simply White. Second question...the baseboards are lovely and very high, I would like them to remain a feature, which white to choose for trim? Your comments are appreciated!!!

The Chantilly Lace is in my hallway and stairwell going to the upstairs, so I’m not sure how much decor I can put there. There’s no room for furniture. I have a beautiful warm wooden chandelier in the space with five 3000k bulbs. Are the bulbs part of the problem? Is the light too white? I painted the office (which isn’t near the hallway and stairs) in BM Graystone, the dining room in SW Dorian Gray, the mudroom area in SW Repose Gray with the built-in in Chantilly Lace, and the doors in the upstairs hallway in SW Dovetail. The Chantilly Lace seems way too white and bright. :/ I was trying to create a modern farmhouse, rustic look by going with white. I already had Chantilly Lace in my foyer and in my great room where there is board and batten, and I love it in those areas.