Not sure why all of the aversion to tilling on this site. You can till if the following conditions are true and you follow the proper procedure: If the soil is extremely compacted due to years of neglect (like the surface of a parking lot) If you have more than 50-75% weeds (or no grass/bare spots) The proper procedure: round up mow short (as short as possible) till until soil is tiled to 4-6". it may take several passes if the soil is super compacted. Now, here you can make a choice. After tilling millions of old weed seeds will be brought to the surface. This is just a fact of life. You can either 1.) water the dirt and wait for the seeds to germinate. Then KILL them with round-up. or 2.) get some top soil delivered that is weed free and spread it all over the tilled soil. This will re-bury the weed seeds and give you a nice layer of fresh top soil (get the 50/50 compost/soil mix) in which you can plant grass seed. Bury the seeds 2" down and you don't have to worry about them any more. Yes, the ground will be bumpy after this. That is why the good lord provided us with a.)rakes and b.) lawn rollers. Rake the debris up. Rake the soil to grade it. Roll it with a roller 1/2 to 2/3 full of water. This will give you level ground. If it isn't level, roll it again. This isn't going to compact the soil enough to worry about - it will just make the ground level. So there is a time to till and a way to till. The blanket statements that just say: do not till aren't always accurate.

here is a link to your original thread. If you want more people to chime in, it would be better to just bump the original thread by posting on it again instead of starting another one. Also, in the future, you should try naming your threads differently. When I searched for your bedroom thread, I came across a kitchen backsplash thread almost named the same. Good luck. Here is a link that might be useful: Original Thread

Although it is not your glam, the color is neutral gray and that fits your scheme. I wish there was one w/out the faux FP, but that might be a feature that draws him to it. What will go in it? Glass doors are nice to protect DVD players, etc. https://www.restorationhardware.com/catalog/category/collections.jsp?categoryId=cat3850077 change knobs for a glam look https://www.livingspaces.com/pdp-sinclair-grey-74-inch-tv-console-94752?utm_medium=products&utm_source=google&utm_campaign=Ci_PLA_Shopping_II&landing=product_listing&lsft=utm_source:google,utm_medium:cpc,utm_campaign:Shopping_Tier_3,adgroup:Furniture_Media_TV_Console&gclid=CjwKCAiA_ojVBRAlEiwAOLRxI7YqPXsPiJjGVJCLi0iQrfVHAy3b-0lXAn0Sqkj58Lnn2SY9f9c_OxoC9tsQAvD_BwE

Agree with Matt, leaves look rotting but are also sunburned. Rot wasn't visible in other photos. Many of the leaves are sunburned toward the tips... I wouldn't worry much about looking for turface and/or bark unless they are easily found. I went thru all of that (as many others did); found turface but not too lucky with bark (lots available, but is too large - 2" and bigger). So I settled for mix I use, with ingredients I mentioned in previous post (including photo I posted). BTW, I have read all posts by Al. I am very strong 'believer' ...but if you understand principle, you can make excellent mix using materials easily available, without going crazy looking for exactly the same...For example: Al's recipe doesn't call for perlite. But knowing perlites water holding capacity, one can figure out what it is good for and use it as a substitute for substrate not so easily found. There are many other substrates that are excellent if used in making well draining mix.