Thanks for that tip Happymom. The other day I got out some pajamas I hadn't worn during the warm summer months. They had been washed in Liq Tide HE before putting them away for the summer. WoW! Did they stink! As soon as I put them on I could smell a sour, musty smell on them. The next day I took all of pajamas I had in that drawer and rewashed them in my Sears HE Perfume Free formula. I used only a teaspoon and I got suds galore out of them, even after 4 rinses. I know I'll have to de-gunk a lot of my winter clothes, like sweatshirts, so I'll use your tip on running them through a cycle with vinegar first. Today I used some Whirlout. I put 1/2 cup into the washer drum and ran a long hot cycle. Some suds came out in the first spin, but they quickly dissipated, and after that each rinse was suds free. That tells me the problem is in my clothes and not my washer, thank goodness, but it'll still be a long process getting all the built up Liq Tide out of everything I've washed in it for the past 5 years. Janet

make sure you get the right one because some of them are not really ad blockers they are adware or worse, I had to help someone try to get one of those rogues off and it was a pain. I don't use chrome, maybe jasdip or someone that uses the real one can give you a link so you know you have the right one. I use adblock plus on my firefox and I see there is one for Chrome and I know adblock plus is good Adblock Plus for Chrome you can also get it at the chrome store. Chrome Addon: AdBlock for Google Chrome

Your thread is not in the guide at the top. The needle tension is usually set about 4. The needle position is usually in the middle for straight stitching and bobbin filling. The stitch length is usually shorter to fill the bobbin. I can't tell if the thread is in the tread guides over the top of the needle or not.Clean the dust out of the machine if any, check your needle, and refill the bobbin. Try on a scrap of cloth not paper. Look for your serial number and order the manual for your machine. Mine is not an electronic, so I don't know where it will be located.

I am still “Kicking” Enjoying this cool weather in North TX. Still managing to find all the firewood I need this winter +. I’ll hope to be released with w full Neck Fusion after the 12 month’s evaluation in 2 months. I have found and harvested plenty Red Oak and Live Oak with help. A lot needs splitting but there is plenty in my 35 lb lifting limits. I have stayed away from my Electric and Gas Chain Saws. I have used my 14” Makita Chop Saw with Carbide Teeth Blade cutting 4-6” dia wood and below (from pre cut lengths by friends I have the best “Group Of Friends” that I hope I will feel like fishing with again. One Good Trade Offs is splitting their wood with help on the half. Plus, Small Engine Repairs, Welding and Etc for some of their fish… My goal is to get a release with a full fusion to feel safe working Etc. To start Cutting and Splitting my Stock Friends have helped me Stock. Last, is there a better blade to cut small Firewood with vs my 14” Carbide? Take Care and have a Restful Winter!