Thanks everyone for all of your comments. I'll take some photos asap so that anyone who has ideas can offer them. We really aren't capable (anymore) of doing any of the work ourselves. I myself, have physical problems which would prevent me from doing so. My BF is just not detail oriented enough (as I have learned from watching him this past year since we took possession of the house). Seriously, he tries hard and in a pinch can take care of things but honestly it's like his eyes don't work right or something and then he gets all hurt feelings when I have to point out what is wrong; so it's just not worth it. Thankfully, because of all the work already done on the house I have people I trust. We do have another small bathroom - but it's only a Powder Room but, at least it is somewhere to use a toilet and wash up in a pinch. The shower, as I mentioned, will not be touched since it was recently redone. We don't intend to reconfigure anything for the most part - plumbing will remain in place (except for moving the tub's plumbing over a foot or so - there is room, the wall is long) and while I would really love a double sink I suspect it would mean changing the entire layout of the room including re-doing that shower; which means $2000 already spent down the tubes which would just gall me; so I'll live with the one. It's only two of us living here anyway. At least I don't have a desire to make it a show piece. It's not a fancy house, I don't need a spa bathroom. I just want something up-to-date and which works well (I put a lot of thought into my kitchen; also not a show-stopper but one which "fit" into the existing style and materials of my Craftsman home. I intend to do something similar for the bathroom.

This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

I like option "B", with some possible tweaks (some of which may have already been mentioned by others): 1. Recess a medicine cabinet above the sink. I did this three years ago and absolutely love the medicine cabinet we ended up with, Kohler, with mirror both inside and out, plus an adjustable magnifying mirror. If I had to renovate a future bathroom, I'd pick this same cabinet again in a heartbeat. Kohler Mirrored Medicine Cabinet 2. It looks like you may end up with several inches of space in the upper left hand corner between the wall and the end of the tub. A. See if it is enough for a narrow storage space - maybe something can fit in there like a 6" pullout, which can be great for storing a variety of personal hygiene items - shampoos, conditioners, body lotions, etc. Look at some kitchen cabinets or rev-a-shalf items for possible fits. Here's an example: Using Narrow spaces Another option would be to use that space to stack rolled-up towels and similar linens. B. Another option would be to use that space for storage from the inside of the tub, as in a deeply recessed niche for the usual assortment of bathing products. 3. Consider putting in partially recessed shelving or cabinetry above the radiator for additional storage. Depending on your decor and budget, you can be pretty creative with something like this wall system, and it give you the option to easily adjust it as your needs change in the future: Kerf modular adjustable wall system 4. Don't forget to consider storage above the door frame, and behind the door itself. You can put a couple of towel racks on the back of the door. And if you have a wall towards the back of the tub, you can add a couple of hooks on the wall partitioning the tub from the narrow storage space, to hang a bathrobe or towel.

Thanks to both of you. I will definitely look at the mirror back light below and above , as I was planning the below one anyway. That makes sense. Outside of that, most of the beautiful pictures you shared were including recessed lights, which I cant really do because of the concrete ceiling. We thought about doing a drop ceiling to add can lights (ultra flats ones) but that would force us to redo the doors for the whole floor which are custom floor to ceiling height. That is why I was considering doing that same thing but just partially (just 6 ") from the vanity through the shower/tub so be able to have the recessed light look. I am just struggling getting a clean look, without those options. If I can't do that, and I cant do the sconces because there is just not much room to add a sconce between the sink and the wall next to the vanity (it is only 30" wide and our sink is a large rectangular vessel sink), what other options would you recommend?