This is my living room....11ft wide by 19ft long (from the stairwell.) We are struggling to find a furniture plan that will work with this long and open living room. The picture is taken from the front door entry. On the left wall (which you cannot see) is a large living room window 4'x8'. We are hoping to have a built-in constructed wall to wall on the far end of the living room. Cabinets on the bottom, shelving on the top, and an opening for our media. We need the storage for our young family of five. Around the stairwell to the right is an open doorway to the kitchen. On the far back right is the dining room--which is open to the kitchen. Right now we have a very small sofa (~50") floating at the closer end of the room. Two chairs are to the left under the window. It works but it feels like a waiting room! I'd like to have a console table on the narrow wall to the right (between the opening to the dining room and walkway to the kitchen.) I'd like to have this room sit 4-5 people as we're planning on finishing the basement to represent more of a lounge space for the family.

Ferrous Furnishings is new to me. Thank you. Okay, so it might be that I need to hire a pro to help out. If the other pieces in my LR have the walnut legs. Then is it okay to go to teak along the whole side wall (side of the seating area which face a fire place--so a bit out of the seating area? Seeing my mid-century "inspired" new stuff above - somewhat more modern, which of the three pictures of the following wall units fit best (Crate & Barrel, Room & Board, Hans Wegner) ? I'm having a hard time deciding if I want to be urban or fully MCM. Thank you

some more thoughts on rugs https://www.westelm.com/m/products/distressed-nadine-rug-t4876/?pkey=crugs-flooring&isx=0.0 https://www.westelm.com/m/products/verve-rug-t3653/?pkey=crugs-flooring&isx=0.1 https://www.westelm.com/m/products/meadow-rug-t4539/?pkey=crugs-flooring&isx=0.1 https://www.westelm.com/m/products/royal-grid-shag-rug-t5050/?pkey=crugs-flooring&isx=0.2 https://www.westelm.com/m/products/remy-rug-t5344/?pkey=crugs-flooring&isx=0.0

Wow! It's so wonderful that you are keeping those lovely cabinets. FYI, instead of refinishing, there is an alternative that you can use that gently revives the cabs with the hassle (and cost!!) of full refinishing. I've used this for a number of my client's projects and the results are quite astounding. Once you have the cabs cleaned, Howards makes a product called, "Restore-A-Finish". You can find it online, but the closest brick and mortar locale is most often antique stores who often display it at their entrances. It comes in various tones and is a gentle tinted oil with a solvent that smooths out any scratches or nicks and is sort of like a facelift without the heavy involvement of full refinishing. It is wiped on and rubbed, then any excess wiped off and that literally is it!! You can then go back with a furniture polish if you like. I use their Feed 'N Wax, but there are other wood polishes that also work well. If these were mine (I'm so jealous), I would also install inside hardware upgrades such as slide outs; maybe soft closing Blum hinges etc. But I agree with the others that you can also save the original pulls and knobs hardware too. You know, home renovations always deliver extra costs and going over budget is all too common (Ask me how I know!). But this is one project out of all the others where you can truly save on refinishing costs (that labor isn't cheap) and the Restore-A Finish look will be lovely. You might at least try this approach before going full refinishing and then decide. But the Howard's product will bring them back to mint without all the sanding, stripping, and associated mess. All the best to you on this amazing home.