Has anyone installed the Julien Fira Apron Front Fireclay Sink?
Isaac Fleming
6 years ago
Featured Answer
Sort by:Oldest
Comments (24)
Patricia Colwell Consulting
6 years agoRelated Discussions
Has anyone undermounted a Shaw apron front sink?
Comments (11)I undermounted a Whitehaus fireclay sink because I wanted a fireclay sink, didn't want the apron front, and liked the sizes available in the Whitehaus product line. (None of the true undermount fireclay sinks quite fit my size requirements). I have a wall mount faucet, so didn't need space for a deck mounted faucet behind the sink--so the deeper (front to back) aspect of an apron front sink worked well for me to maximize the size of sink I could fit in my small kitchen. If you plan on a deck mounted faucet, though, you'll probably need to have countertops deeper than 24" to allow space for the faucet--check the sink measurements. Installing the sink didn't seem to be a big deal for the installers--they just added a support structure inside the sink cabinet and set it in. The countertop (Paperstone) installers templated for the sink, and added some shims to make the sink fit snug against the countertops. No problems so far, and I don't regret not going with the apron front. In my small kitchen, I think the continuous run of cabinets/countertops looks a BIT more expansive than it would have looked with an apron front sink. While there are lots of nice examples of apron front sinks in modern kitchens, I think I agree with you that a regular undermount sink will have cleaner lines in a modern kitchen. If you aren't terribly attached to the Shaw's sinks, you might want to look at Whitehaus or other brands (like Franke). You really pay a premium for the gorgeous curves on the Shaw's apron-- but if they won't be visible, might be able to get a better deal on a different model. (I got a great price on my Whitehaus 501 model online from Home and Stone) Here are a couple of pictures... hope this helps! (oh---and ignore my index card backsplash!)...See MoreDoes Anyone Have a Blanco Apron Front Sink?
Comments (8)just had my 33" Blanco sink installed this week and love the size (bigger than my old 29" sink but not cavernous like a 36" would have been) -- i also got the grid which i think is a good idea for protection as well as raising the base slightly if you are tall. I bought it at a great price and spoke to a couple different sales reps -- both seemed to think it is fine quality..there def is a snob factor if you buy a sink with a higher profile brand for those who want to spend more for it. Blanco isn't hollow like some cheaper fireclay sinks. Recent consumer reports gave fireclay overall good ratings for durability but almost no sink fared well if you drop a heavy object on it from a foot above...fingers crossed cause i lurrrrv it!...See MoreFireclay apron front sink: deep chip...can I repair this??
Comments (18)This very thing just happened to me unfortunately. I literally just installed the sink. I dropped a ceramic coffee mug on it by accident. The mug didn’t break, but took a nice unsightly chunk out of the top inner edge of my sink. J b weld has a product called water weld. It’s a two part clay like putty. Both parts are already combined. Just cut off the desired amount, mead together, and smash it into the damaged area. You will have to work it to shape, and smear it around the edges. cure time is about twenty five minutes. Just before it cures completely I took a free razor blade in gently shave the excess off as level as possible, then let it cure completely. After that some sanding will be necessary for final shaping. I started with a a 100 grit emery, then to a 400 wet/dry, down to 800 wet/dry. This product is white when it cures. It now looks perfectly shaped. The sanding process is meticulous and a bit time consuming, but worth the end result. I plan to paint my area with some type of durable top coat that I can sand and polish. I’ve considered automotive urethane enamel. Good luck. This is my first experience with a fire clay sink. The coffee mug won that battle. It did not so much as chip. I question the durability of fire clay after this rotten experience....See MoreJULIEN sink SPONGE DRAWER - Can anyone weigh in?
Comments (16)So... I don't want to put a rev-a-shelf in front of the sink because I want the sink as close to the edge as possible (I am short). Additionally, the Julien drawer has holes in the bottom for draining. @Debbie SL - the problem with your solution is that I have more than just one sponge. There's a sponge and a scrubber and a plastic scraper and a long brush and another long brush/sponge for baby bottles, as well as a cellulose shmata for wiping down surfaces. I'm now wondering though if I am doing sponges all wrong - in which case I now want to know how I can do it better. And as for the sponges never drying in the drawer, my sponge has never dried on top of the sink either, so I'm okay with it. @Heather N I am obsessed with your caddy and I might just do something like that instead. Thanks everyone....See Moresepurdy32
6 years agoRita / Bring Back Sophie 4 Real
6 years agoLauri Geissler Thompson
6 years agoIsaac Fleming
5 years agolast modified: 5 years agoJo Miller
5 years agoMarci
5 years agoafarrell5
5 years agolisaandmarcel
5 years agoJoseph Corlett, LLC
5 years agoZalco/bring back Sophie!
5 years agolast modified: 5 years agoLeigh Bradbury
5 years agoMarci
5 years agobluescootergirl
5 years agoKari Grapsas
5 years agoalimarque
5 years agoChristiane De Carvalho
5 years agoJoseph Corlett, LLC
5 years agolast modified: 4 years agoSaniya Bloomer
2 years agohayleyfilasky
2 years agoLori D
2 years agobp33
last yearkendallmiles
last year
Related Stories
KITCHEN DESIGN8 Apron-Front Sink Styles for Kitchens of All Kinds
Simple or showy, matching or contrasting, apron-front sinks are popping up in kitchens far from the farm
Full StoryKITCHEN DESIGNKitchen Sinks: Fireclay Brims With Heavy-Duty Character
Cured at fiery temperatures, fireclay makes for farmhouse sinks that just say no to scratches and dents
Full StoryKITCHEN DESIGNHow to Choose the Best Sink Type for Your Kitchen
Drop-in, undermount, integral or apron-front — a design pro lays out your sink options
Full StoryKITCHEN DESIGN8 Kitchen Sink Materials to Consider
Learn the pros and cons of these common choices for kitchen sinks
Full StoryKITCHEN DESIGNYour Kitchen: Farmhouse Sinks
These extra-deep and minimal sinks can go from country to jet set
Full StoryKITCHEN DESIGNKitchen Sinks: Antibacterial Copper Gives Kitchens a Gleam
If you want a classic sink material that rejects bacteria, babies your dishes and develops a patina, copper is for you
Full StoryMATERIALSTrends: Not Your Everyday Kitchen Sink
Soapstone, copper, concrete. Give your kitchen a distinctive look and feel with a less-common sink material
Full StoryKITCHEN DESIGNThe Return of the High-Back Farmhouse Sink
See why this charming and practical sink style is at home in the kitchen and beyond
Full StoryMOST POPULARHow to Choose the Right Kitchen Sink
Learn about basin configurations, sink shapes, materials and even accessories and specialty sinks
Full StoryBATHROOM DESIGNThe Right Height for Your Bathroom Sinks, Mirrors and More
Upgrading your bathroom? Here’s how to place all your main features for the most comfortable, personalized fit
Full Story
Isaac FlemingOriginal Author