@WoW Washington That makes sense. I went to your website and couldn't find a list of brands you sell. I'm looking for aluminum framed sliding windows with narrow sightlines. I'm aware of the uber luxury windows by Vitrocsa, Styline, and Skyframe, and their frames are about 1" thick. Gorgeous. But of course, the prices are as much as my entire home cost. I'm wondering if there's a narrow frame out there, maybe 2" thick, from a more economical standpoint. Milgard and Andersen are thicker than that. What brands do you sell on your site that have the narrowest frames, could you share? It's funny because I live in a old, modest beach house in Florida that JUST SO HAPPENS to have come with super narrow 1.5" frames. Even on my 6' x 5' sliding window. The frame is just 1.5" thick. Love it! But the company went out of buisness.

There are basically five types of LowE coatings currently on the market. Three are "sputter" or softcoats and two are "pyrolytic" or hardcoats. Of the three softcoat products, basic LowE would be considered a high solar heat gain product. LowE2 would be considered a low solar heat gain product, and LowE3 would be considered an even lower solar heat gain product. Andersen's LoE4 has a standard LowE2 coating between the lites and argon gas for energy performance, but it also includes a titanium dioxide coating on the exterior of the window that makes the glass "self-cleaning". Although some folks might cringe at the term self-cleaning, the coating does work quite nicely and you will notice a difference in how they look and in how often you will have to clean the glass. Finally, the "4th" feature of the LoE4 is a plastic film that is applied to the glass in the factory that protects it from dirt and debris and even minor scratches during shipping and handling and install. Andersen's SunII glass is a tinted LowE2 that has very nice solar heat gain blocking ability and also it is nice because it cuts down on glare as well. Milgard's SunCoat is a standard LowE2 product - much the same as the LowE2 that Andersen offers as their standard. SunCoatMax is a LowE3 product. The LowE3 product is very new and has only been around for maybe 3 or 4 months - this doesn't mean avoid it because it is new - it means that it is an advancement of a proven technology and it works really well. LowE3 has the same heat blocking ability as a tinted LowE2 (such as SunII), but with visible light transmittance very similar to a standard LowE2 product - without tint. In the case of a west-facing door that has both heat and glare issues, then you may prefer a tinted LowE but with the understanding that the view thru the door will be less. SunII has either 38% or 40% visible light transmittance (I forget which version they use) and SunCoatMax has 66% visible light transmittance - again with very comparable solar heat blocking capability. Standard LowE2 (including SunCoat) has about a 70-72% visible light transmittance. Standard LowE has about a 78% visible light transmittance, but it also passes significant solar heat which is an advantage in places other than where you live. I didn't mention anything about hardcoat coatings because none of the products you mentioned use them. Also, they are much less appropriate in your environment (primarily cooling) than are sputter coats. No LowE coating has an affect on sound propagation thru the glass.

I ended up telling Sierra Pacific that they were the same price as Marvin & that I was going to buy Marvin. Sierra reduced my whole house price by $12,000! Hard to refuse that offer. What is the primary difference btwn SP & Marvin? Also- is there a rating that tells you how the glass will reduce the chances of fading my hardwood floors & furniture? Is there more than just LowE2 rating to tell me how well the glass helps in fade prevention or reduction?

Nothing, it's the same product.