Hi Writersblock! What were you thinking would be a concern? Here's what we know from our install-- let me know if there's something we missed! The edges of the sink when undermounted are the same height as all the cabinets in the sink run, so while the sink probably bears some weight, it bears no more or less than any of the other cabinets in the run. The countertops in ANY sink run aren't supported continuously-- they're supported periodically along the run by cabinet sides. Whether the weight is supported at any particular point by a wooden cabinet edge or a porcelain sink edge shouldn't really matter at any rate-- we're only talking about a few hundred pounds of wood, tile or stone. The only time you'd have a problem is if someone screwed up and raised or lowered a cabinet (or a sink, I guess) so far that you'd cause a stress crack. So as long as all the cabinets and undermount sink are the same level, unless someone did something REALLY strange, havig a thick, sturdy (and the Domsjo is nothing, if not that) porcelain sink bear its fair share of countertop weight shouldn't be worth a second thought.

I don't think youll be able to fit a trashcan on the same side as the garbage disposal. On the other side, it should fit. With that said, I would advise against getting the drawer pullout for the trash for two reasons. One being, if there is a leak, big or small, your access to plumbing is limited unless you take out the entire pullout. And keep in mind where your plumbing is coming in from. Our water supplies were from the floor and out drain was through the wall. The water supply would have hit the back of the pullout. The sink cabinet is our only cabinet that we used doors for. We have drawers/pullouts for every other base cabinet in the kitchen. Two, it is my personal opinion that the workflow is off balance with the sink and garbage being in one cabinet. Generally if two people are in the kitchen, one will be by the sink (prepping, cleaning, etc), so access to the garbage for the other person is limited, unless the first person moves over. But, if space is tight and you can't find anywhere else to put a trash pullout, 'you gotta do what you gotta do!' We ended up using a 12 inch base cabinet with the wire pullout and moving the wire racks all the way down and putting an IKEA trash can with lid inside. Works well and takes up very little space. (also, I can't tell you how much we love our Domsjo sink and Wasteking!) Good luck!

Great feedback, thank you. shaggydogs- I'm not sure about that 1.5" thick issue. I know they released their new "SEKTION" kitchen line and that's what I ordered. I noticed during my online building process that the sink base cabinets are now different compared to the old AKURUM models. Maybe they have some adjustments built into the new base cabinets for this difference? I'll place a call to IKEA and find out. milworkman - As for the particle board issue, most laminates are bonded to particle board and when treated well they survive quite awhile. My grandmother has a laminate countertop that's 20 years old and still going strong. But, you're right about the 45 cuts, it's pretty much impossible to do that and keep it sealed. I could just join them together without 45's, but they have beveled edges and I've never been a fan of joining two perpendicular bevels together like that. It just collects debris and bacteria as well as looking "half assed" in terms of build quality in my opinion. So, it seems I may have to give in and return these tops when some solid oak slabs become available ( available stock on these tops in Ottawa Ontario is rarer than a unicorn some years!).

Good point. However, I think that the dimensions for that sink have changed a very little bit since they moved from Akurum to Sektion, so it may not be quite so simple to chunk in another one, but I would think you could make it work. Ah, true. I guess it would depend on whether it is the new domosjo or the old. If you know the date the kitchen was installed, that might tell you whether it's the new or old domosjo. Could always take a tape measure to ikea and see if it's the same dimensions as the one in the kitchen or not.