Any idea where to find medjool date palms - 4ft wood or more- for a great price? All nurseries I've asked here quote me $1500-3000.

We looked at that model for our laundry room and thought the smaller doors would be good since we don't have much swing room. DH pointed out that the door shelves take up so much of that space when you open up the doors -- the opening feels cramped and cluttered. maybe you won't miss it. ;-) We are looking at Whirlpool or Samsung models, but they are 32-5/8" wide. The Whirlpool also has a 30" model and I am favoring one of those because the shelves have more adjustment potential. The icemaker bucket is much larger in the Samsung -- a good thing if you want to be able to store up a lot of ice, not so good if you con't use a lot and want to maximize other storage. Hope that helps.

Been there, done that...lint is such a HUGE annoyance to my life. We're in a 2nd floor condo where the dryer vent ducting goes to the roof through the attic over 20 feet and several elbows. My husband bought the condo years before we met, and the ducting was clogged after several years. At the time, he decided to disconnect the vent from the duct. The resulting moisture did some damage to the cabinetry (swelling of the particle board, even under layers of oil-based paint). Soon after we married, he decided we needed to fix the problem correctly. He went up into the attic and disassembled the ducting, brought it outside, and blew it out with his air compressor. I pushed some cleaning tool through it as well. We can't be doing this regularly! I mean preferably, never again! So, I had him put a filter -- a gallon paint strainer -- over the dryer vent where it connects to the machine. This clogs every month or so, we pull the machine out, disconnect the vent, clean the strainer, and put it back. This is still an annoying chore, but not the nightmare of dealing with the whole duct run. My husband had a cool idea, that what we need to do is sew a new, longer strainer that tapers to a skinny point, so that even when it clogs at the point, there can still be air flowing past the clogged strainer, and we should be able to go longer between cleanings. We got a new dryer last summer, and pulled the ducting out of the attic to clean it -- but it was already clean as a whistle. So, our secondary filter system has kept the duct run clean for 9 years. I found you can buy secondary lint traps with a door that opens to clean them out, but we don't have room to install the box in our laundry room, and I don't think it would work any better or be easier to clean than our homemade filter. When I redo the floor, I plan to put magic slider thingies under the dryer feet to make it easier to move in and out, plus I won't want to gouge my new floor. I have researched other solutions. People claim that solid metal vent will maintain better airflow than pleated, but I think it will still clog because we need 2 90-degree elbows to get it connected to the duct in the wall. And if it clogs, how do we pull out the machine with a non-stretching vent? If we could move the duct in the wall to match the dryer vent outlet, that would eliminate 2 elbows and would probably help... I also found you can install a secondary fan in the ducting near the exit, increasing the airspeed in long ducts so the lint won't clog. They cost $150-200, but if I never had to clean out the duct run or pull out the dryer to clean my makeshift secondary lint trap ever again, it would be well worth it. I also think that our ducting is leaky somewhere, because rooms on the other side of the wall (our master bath) get crusted with lint all the time. Finding and sealing those leaks would probably improve airspeed some, plus save me tons of work cleaning the lint all the time. I think the additional fan is the way to go. In 2 other areas where we replaced an ineffective low-cfm cheap fan with a high-cfm good one, like the hood over our cooktop, it made an amazing difference, night and day. Here is a link that might be useful: example of dryer duct fan

14x12 area for cabs and a ppliances? that's a good size. "alot of big drawers could be visually plain. " don't say that! lol! I plan on all drawers except sink base. my kit is only about 10 x11 tho. 12 x 11 including the back hall - that whole side of it is open to the back hallway. while at my sister's on Friday I looked around to see if she had a bunch of drawers together. She doesn't - but then she was sick during the build and her dh chose most everything. (he's the cook). She did show me 1 cab they had with the slide outs. It was a ONE door cab tho - it didn't seem to be that much of a problem. open ONE door, slide out 'drawer'; slide back in and shut the one door. he keeps pots / pans on those 2 drawer/shelves. It's still not something I'll put in. It's still 1 door to open that won't be there with a drawer. I have to make things as easy as possible for myself - to use and clean. here's a bank of drawers in my sister's kit; plain, flat panel fronts... like i want.