skip to main content

Trim wood screws

16 years ago

We are putting in some replacement windows. We got wood with aluminumclad(deep brown) exterior. The window wood we stained and varnished, it looks great. My husband has made up two kinds of trim for the windows, red cedar and red oak. Both are ready to put up as the window trim, we have not decided which we will use inside. As we hope to redo the interior walls in the next year or so, he would like to put the window trim up so he can remove it once we start work on the walls. We are looking for a recommendation of a finishing screw that we can remove. We are also thinking that perhaps he could countersink a regular screw then put in a plug that matches the trim.

Nancy

Sort by:Oldest

Comments (6)

Jon1270
16 years ago
Doing trim work with the expectation that it'll have to be redone in less than a year seems a little silly but, setting that aside...

I think you're making it harder than it needs to be. No screw will ever be nearly as inconspicuous as a finishing nail. It'll be easier to pry off nailed trim than to dink around removing putty or wood plugs from screw heads. Yes, a prybar may do a little damage to the trim, but so would whatever tool you'd use to remove the plugs.
User
16 years ago
Trim screws are only inconspicuous when they are colored the same color as the material. Sometimes difficult.

Use the smallest brads you can find that will hold the trim---those will be very easy to remove.
Related Discussions
Need wood filler that will hold screws
Q
Comments (1)
Forget the putty. Dribble in some thin viscosity super glue. This will wick into the fibers and strengthen them. Then add in some sections of match sticks or toothpicks and add another drop of glue. Let that set up a minute, then re-insert your screws.
...See More
2 layers of wood under the floor?? Screwing every 1 foot of floor?
Q
Comments (18)
@Creative....Yah... in Canada we "assume" that permanent flooring will be used (tile/vinyl, etc) and therefore START OFF with the two layers...If the homeowner then chooses a nail-in-place floor then they are better off. The problems come in when only ONE layer is used and then "Uh Oh. Spaghetti-O. We need another layer because "stone" has been requested for the entrance/hall/dining!" Builder's try that one as often as they can....sigh.
...See More
Light wood trim, dark wood trim or paint
Q
Comments (7)
It looks like you have beautiful wood doors, door trim and beams. Don't know what you have around the windows (not pictured). Looks like the stairs could use a bit of TLC. If I were you I would not be in a hurry to paint or refinish the wood. First year in the home should be figuring out what works, doesn't work, how the home functions and where to sink your money. Prime your walls - live with them for a bit and decide if you really want white walls. I know all the pictures on the internet today are white rooms, but they also have studio lighting. Not all homes look good with all white walls. White needs lots of light to really shine. Often a light neutral color looks better than white if you don't have giant windows, skylights or other great lighting. My last home had between 6 and 16 linear feet of windows in each room - natural daylight galore and I had white walls. My current home has more normal sized windows in most rooms and I am painting the walls that were white to something more appropriate for the amount of light. The white just isn't pretty with out sufficient light. With the walls all primed you can look at flooring and paint and make a better decision on what works best in your new home.
...See More
For attaching kitchen cabinets together, do any wood screws work?
Q
Comments (5)
If they are typical cabinets, get trim screws like https://www.homedepot.com/p/GRK-Fasteners-8-x-2-1-2-in-Star-Drive-Composite-Trim-Head-Screw-100-per-Pack-119079/203525310 in a length that is appropriate. You'll have to predrill and may need to countersink with a regular drill bit. It depends how hard the wood is. Put the screws behind the hinges for an invisible look, but who really will notice?
...See More
nancyk
Original Author
16 years ago
The plugs would only be pushed in by hand, not permanently secured, so hopefully they would be easy to come out. But now he is thinking of using cedar as the window trim, getting small screws and then painting the heads the color of the cedar. Of course, this is impossible but if the color matched even somewhat it would be o.k., as red cedar when finished has many color variations between red and offyellow. If the heads of the screws were small, at a distance they would not even be noticed, closeup off course they would be seen .

Nancy
sombreuil_mongrel
16 years ago
This seems like it would fall into the "colossal waste of time" category. Either nail it in temporarily with 4's, or hold off doing the trim until the walls are done. Are the loose, removable plugs going to look any better than no trim at all? In woodwork, a plugged screw hole is a last resort, when the structural properties of a screw are deemed necessary (like in stair rails where life and/or limb are at risk) and even then we hide them on the least conspicuous surface.
Now, if you wanted to use perfectly-spaced polished screws and trim washers, you would be making a statement and introducing a new pattern, and if this were in keeping with the entirety of the design vision for the space, it could be justified as a decorative element within the whole scheme.
But as a makeshift temporary measure, it will be incongruent and odd.
Casey
pasigal
16 years ago
Forget nails.

We used what I guess you would call collars around wood screws for our window trim. They are brass and the screws set in them proud of the trim. Looks very tidy and sure came in handy last year when we replaced a few window in our circa 1915 apartment. Easy to take out the screws since the heads aren't driven into the trim.
brickeyee
16 years ago
"They are brass and the screws set in them proud of the trim."

If you do not mind the appearance.
Many think it looks rather poor.

If you use smaller than usual nails you can easily remove the trim with a wonder bar, pull the nails through the back, and then use the trim over if you want.

Related Stories

DIY PROJECTS The Taming of the Screw

By Buckminster Green LLC

Learn the different types and uses of screws to pick the right kind for your next DIY or home improvement project

TRIM Trim Color Tips: Get Your White Trim Right

By Jennifer Ott Design

Set off wood tones, highlight architectural features, go minimalist ... white trim is anything but standard when you know how to use it

COLOR 11 Terrific Paint Color Matches for Wood Details

By Charmean Neithart Interiors

Pair your wood trim and cabinets with the right shade of wall paint to bring out the beauty in both

REMODELING GUIDES Pro Finishing Secret: Aniline Dye for Wood

By Lisa Frederick

Deeper and richer than any stain, aniline dye gives wood stunningly deep color and a long-lasting finish

GREAT HOME PROJECTS How to Bring Out Your Home’s Character With Trim

By Steven Corley Randel, Architect

New project for a new year: Add moldings and baseboards to enhance architectural style and create visual interest

WINDOWS How to Replace Window Trim

For finishing new windows or freshening the old, window trim gives a polished look with less effort than you may think

DECORATING GUIDES Add a Metallic Edge with Nailhead Trim

By Shawn Gauthier

See what a line of studs or nailheads can do to upholstery, wood furniture, doors and more

WHITE KITCHENS 4 Dreamy White-and-Wood Kitchens to Learn From

By Mitchell Parker

White too bright in your kitchen? Introduce wood beams, countertops, furniture and more

GREAT HOME PROJECTS What to Know About Adding a Reclaimed-Wood Wall

By Rebecca Pogson

Here’s advice on where to put it, how to find and select wood, what it might cost and how to get it done

GARDENING AND LANDSCAPING Choosing a Deck: Plastic or Wood?

By Vanessa Brunner

Get the pros and cons of wood, plastic, composite and more decking materials, plus a basic price comparison

Sponsored

MCR ROMERO WORK LLC

Innovative & Creative General Contractors Servicing Franklin County

More Discussions

How to un-paint these railings

13

how far should you set back bookcases from the mantel wall?

1

Reviving this old wood screen door

3

Advice Needed on Installing a Wood Accent Wall

2

Staining Interior Windows & Doors

0