I recently had a Trane XR15 Heat Pump w/ VS Air Handler installed in my house. I told the installer I wanted a HW Vision Pro IAQ stat so that I could control the humidity level in my home. He let me know that he had never installed one before. And now afterwards I do know if he has wired it properly from the EIM to the air handler. I have read a lot of post to try and understand it but I just don't get it yet. Can anyone explain exactly how everything must be wired at the EIM to the air handler connections, what my dip switch settings must be and if any settings must be set at the thermostat itself. Then, once everything is wired properly, how do I use the "DeHumidify On Demand" feature on the thermostat to lower my humidity. I think help from you guys who install these things all the time will be able to help me and my installer in figuring it out. My HP is a 4 Ton unit and the air handler is a Trane 4TEE3F65B1.
tigerdunes
baldloonie
Related Discussions
Honeywell Vision Pro 8000 or 9000 IAQ?
Q
do i need one honeywell's visionpro® iaq for each unit?
Q
HW Vision Pro IAQ stat
Q
Need expert guidance for a new HVAC system
Q
carydan
ibjamminOriginal Author
carydan
classicdave
classicdave
tigerdunes
carydan
classicdave
carydan
ibjamminOriginal Author
classicdave
e171fish
ibjamminOriginal Author
classicdave
e171fish
classicdave
e171fish