>>>"Wouldn’t it be cheaper and open your choice of washer options to pay a contractor/plumber/drywall guy to swap the connections around"<<< Might be, which is why I mentioned the SQ price. Especially so if HU##### wants a matching dryer and adds in the relatively high cost of Speed Queen's dryer versus, say, spending a lot less to get one of the Electrolux models with reversible washer doors (EFLS427, 527, and 627., IIRC) and their matching dryers. Also, I'm recalling that our local Home Depot has some of the new GE "fresh vent" (or maybe "Ultra Vent") front load washer models, and one or two of of those GEs now have reversible doors on the washer. (At least Home Depot said they did.) Sorry, can't recall model numbers at the moment but might be worth your while to check on. Despite the high price, Speed Queen FL models do have a devoted following for reasons outlined in this older thread and this other one. The SQ FL models come with a full five year factory warranty, too. But bear in mind that, if warranty service is needed for some reason, it goes through the selling dealer. So, it is best to check out your local vendors rather than buying a SQ on-line from an out-of-area seller. If you buy from an out-of-town online vendor, and are not inclined to DIY repairs (the SQ's are easy to work on, IME), getting SQ to arrange local warranty service reportedly can be slow and cumbersome. Those considerations might or might not make the Electrolux and GE models seem more attractive choices.

I don't think I could make it work and be satisfied with the way I would need to work around the doors. My laundry area isn't all that deep so the space I would need to move the washer and dryer out to accommodate the dryer vent would put the doors too far out to maneuver around and not be up against the wall opposite the washer and dryer when trying to load unload and fold. Its just not worth the hassle. I contacted Miele and from the response I got I don't think they consider it a problem worth fixing. So I guess it's back to the drawing board. I was looking at a new Kenmore's with a color touchscreen. I'm not sure I am willing to make the leap of faith to having ALL my controls rely on one touch screen.

I am so very happy to have an old-school top loader again. My front loader finally bit the dust and we didn't even bother to try to have it fixed. It was here in the house when we moved in - we're kicking ourselves for paying extra to keep the set, we should have installed our old ones - and these were awful from day one. The first pain was the kamikaze clothing that leapt out from both washer and dryer when the door opened or you pulled something big out. It sucks that something you've just washed has to wait to get cleaned again. Plus, with a bad back, I didn't like bending down so far. It is infuriating that you need to spend extra money on those pedestals to raise them up, and laundry baskets won't fit under either door without them, so, again, when the door opens, things can hit the floor, which is horrible. The machines come out of the box with this huge flaw and you need to spend $150.00 minimum to make them work as they should. They should just be taller from the outset. Also, I like pulling things up out of the washer and then putting them straight into the dryer without having clean wet clothes go into a basket that has previously had dirty clothes in it. Then came the smell. Now it's possible that the previous owner pre-fouled the thing, but that gasket? Where water ALWAYS was? Yak. Mold city. No amount of bleach and cleaning would keep this thing clean. My clothing is now much cleaner after just a week of having a top loader again. I'm very sensitive to detergent left in fabrics, and mine are once again clean and my towels are far more absorbent. It's possible that a new machine, for way more money than I just paid for my new GE top loader, might be better, but we didn't want to spend that much and are happy to have the old style machine back.

I didn't think I had mold either until I pulled back the rubber gasket and took a look. Then what I found there and inside the detergent dispenser was beyond disgusting. I have always left the door open all the way since it was brand new. Now I also leave the detergent dispenser open and I still get mold. It's impossible to get the mold out of the gasket so I will need to get a new one for about $300. It's difficult to get your arm in the dispenser socket to clean as well. This washer/dryer I was told to be one of the best front loaders by 4 different mom and pop appliance stores (Electrolux) and I 've had 5 service calls in 5 years and my husband and I are empty nesters. My neighbor who got the Speed Queen at the same time as I got my FL has had NO service calls and she has 3 kids. I will not be replacing the gasket and instead will get a new Speed Queen top load washer and dryer. I don't need all this hassle. Photos attached.