I have about 55" Phillips smart tv. Model 55PFL3907/F7 SN: VM1A1213110389. I had a power outage and the tv and direct tv modem were working when the power went out. Not so much when it came back on. The TV has a pink/violet picture stuck on it which has yellow writing. Doesn't seem to be a Phillips logo just some random picture. Plus the Direct tv modem isn't working properly either. The Direct tv company is coming to check it out but I'm looking for some input in case it turns out that the problem is with the tv. Thanks for any help you can give.

i have a 1999 philips magnavox big screen model #9p6034 c102 was watching tv and then it made a static sound and then no noise, i have tryed to turn off & on tv and put volunm up & down but nothing. the picture is working fine, just cant hear anything. please help!!!! it's driving me nut's not hearing anything thanks and the chassis model number is ptv835

Our Philips 32" (32PS60 B129) started when powering it on you got a black screen with a white square flashing in the center then shuts off.. turn it on again repeatedely and the square will get larger and keep turning off.. after turning it on and having it shut off on its own numerous times the tv will eventually get a regular picture on the screen except on the right side theres a black bar from top to bottom about two inches in, if you keep turning it off and on eventually the picture will be normal...(The picture was fine and volume was normal when it worked correctly) but once its working after several minutes the volume and channel automatically changes on its own.. we noticed when it was working some channels that had bright colors or a black picture with white on it , it seemed like that made it shut off or change channels, volume, and all other menu changes.. does anyone know how to fix this without having to send it somewhere?? I have knowledge of electronics and am capable of repairing the tv, I just need to know where to start looking for trouble shooting this particular tv.. any help is greatly appreciated... THANKS

TO ANGELA22 YES THE PROBLEM IS FUSES OPEN THE BACK DOOR OF TV BUT BEFORE THAT!! UNPLUG THE POWER CABLE FROM THE WALL,WAIT,PRESS THE ON/OFF POWER BUTTON TO MAKE SURE THERE IS NO POWER OF ELECTRIC LEFT. AFTER YOU OPEN THE BACK DOOR OF THE TV,IN THE MIDDLE BOARD THERE IS "BIG YELLOW" COMPONENT,BEHIND THAT THERE IS GLASS FUSES,REPLACE THEM ALL WITH THE "SAME AMOUNT OF AMPERE AND VOLTAGE",YOU CAN BUY IT AT RADIOSHACK FOR $3 /4PCS. IF YOU CAN, FIND ALSO THE FUSES FROM WHITE CERAMICS,REPLACE THEM ALL ALSO.THE CERAMIC FUSES IS NOT FAR FROM GLASS FUSES. AND ONE MORE THING, DO NOT TURN ON/OFF TV SO OFTEN,WHEN YOU TURN ON THE TV, IT TAKE SO MUCH POWER OF ELECTRICITY FOR START. SO IF YOU TURN ON THE TV MAKE SURE YOU NOT TURN OFF AND TURN ON BACK RIGHT AWAY,ITS GONNA MAKE THE FUSES BLOW UP AGAIN.JUST LET THE TV COOLING DOWN FIRST. IF YOU HAVE TO CHANGE THE FUSES TOO OFTEN,CHECK YOUR HEATSINK,REPLACE THE CONVERGENCE IC, USUALLY THE NAME START WITH "STKxxx-xxx",THEY CALL IT STK IC,ITS LOCATED IN THE FRONT BOARD RIGHT.IT ATTACHED TO ALUMINUM HEATSINK. WELL HOPE THIS HELPFULL FOR YOU