Salicylic acid is usually used in formulas for acne-prone skin. Look for products that say "skin clearing" or something like that on them, and check the ingredient listing. Salicylic acid is the most common beta-hydroxy acid (BHA), so it may be listed as that. The other thing you could do is use a moisturizer that contains salicylic acid and put on makeup over it. I use Bare Vitamins Skin Revver-upper by Bare Escentuals, and it contains it.

Wow! A rare case where the aesthetics part of the performance-aesthetics-economy: pick-any-two limitation is not a factor in hood selection. But first, given a sealed household, I would strongly recommend obtaining a furnace kit to use outside air. This will avoid the possibility of the MUA system not working perfectly and the hood causing negative house pressure and hence backdrafting of the combustion appliance. I know that such devices exist for Beckett burners, and would guess that there are adapters for other burners. As the OP correctly notes, a 200 cfm ERV is not going to cope with a 1200 cfm vent hood. (Actually, what would happen with a sealed house is that at full power, the hood would pull the cfm the ERV would let through into the now minus a couple of inches w.c. house pressure.) So MUA is essential, and in the mid-Atlantic region would be pretty uncomfortable in winter if unheated. Depending on one's tolerance for heat and humidity, cooling in summer might be optional or not. We are starting to get into the realm where performance-economy, pick any two is applicable. MUA can be roughly characterized as passive or active. By passive is meant no fan in the circuit. Active uses a booster fan to keep the house pressure stable. No-fan only works for simple ducting with a vent hood air flow controlled damper. (A recent post here provided some sources for these.) If a filter is used at 1200 cfm (or whatever flow actually could be pulled with all the doors and windows open, then the house pressure will drop. One can see on websites selling filter packs that the pressure drop at such flow rates is too large for combustion appliance safety, which require negative pressures not be greater than 0.03 to 0.06 inches depending on appliance type. Active is needed to overcome the filter restriction. It may be needed to overcome heating heat exchanger restriction and/or air conditioning heat exchanger (expander) restriction. The difficulty with active is balancing the MUA air flow rate against the variable hood flow rate such that the house pressure is near zero. This usually requires a control system of some sort, and can be a "project." What to do? What to do? Only one free-of-processing-controllers active MUA has occurred to me. In the simplest embodiment, the hood control is connected to two parallel wired identical fans, one in the hood exhaust path and one in the MUA path. Then the two will (try to) operate at nearly the same flow rate at every control setting, and one only needs to adjust the MUA duct restriction until it matches that of the hood path. More exactly, adjust the MUA path so that house pressure falls very little as the hood is turned on. Note that this doesn't account for bathroom fans, fireplaces, or other exhaust flows not due to the hood. In such cases, PID control of the MUA fan would be needed. In my case, due to a 1500 cfm hood, 1000 cfm over-oven vent, fireplace, and three bathroom fan household, I am building an active MUA that will use an axial blower in the 2000 cfm regime. It has to overcome the pressure loss of its intake vent, its filter, and its heat exchanger (which is hot water pumped from my oil burner). Control is via a Fuji PID controller operating from a BAPF differential pressure sensor. The motor power control is not yet selected, and a lot of sheet metal action is still needed, along with further attic revisions that I seem to have trouble getting to at the needed rate. I recommend the OP and/or his HVAC person read the "Kitchen Ventilation Systems Application & Design Guide" that may be found at Greenheck's web site. It periodically moves around, URL-wise, so a Google search by name may be fastest. Greenheck or one of its competitors may be able to provide what you need for considerably less agony than a do-it-yourself HVAC project would. kas

I haven't worn a foundation in at least five years & don't miss it. As I've aged ('m 70) I seem to want less 'heaviness' or 'weight' on my skin. (I also don't miss having to put it on.) However, I have discovered a product this past year that I'm really pleased with: Olay Definity Color Recapture. It's a lightly tinted sheer moisturizer, light in texture & not sparkley. It makes my skin looks lighter & almost dewy. I find it at Target, Rite-Aid, CVS, etc. You could check products at these stores; they carry Maybelline, Olay, Neutrogena, L'Oreal, Max Factor & other lines that don't necessarily cater to the under-50 crowd. I use a powder blush & want to share a hint I read years ago. Instead of using a separate eye shadow (which may no longer look good at upper ages), stroke on powder blush under the brow above the eyelid. Also use it on the tip of the chin to add definition to the face. I'm echoing moonshadow - you are a good daughter. When we get so old, we age in ways we don't expect & it's pretty discouraging & depressing. We think & feel the same inside as we did years ago, but there's this ugly person on the outside.

Dressing tables are as scarce as unicorns these days, but I've always had one and always will. When we were in Maine part of the year, I desperately needed one, and of course, was not moving my one from KY back and forth. So I made one...sort of. I bought two white melamine bookcases (30" tall or so), each had two shelves in them. Then I bought a piece of white melamine to go on top, leaving a nice opening in the middle for my legs. I took a Ralph Lauren gingham sheet and draped it over the contraption, and then used upholstery pins to pleat the corners so it was sort of like gift wrapping a box. I then sewed these in place by hand. When I needed something from one of the shelves, I just pulled up the cloth on that side. I had my hairdryer/curing iron/hot rollers on one side (back is always cardboard so it's easy to cut a hole for a power strip and have it inside this to plug in all this stuff). I kept my makeup in a small basket - easy to pull out. I had a silver brush/comb/mirror set that was on top. I found a large silver picture frame and had a mirror put in it and had that on top. I also had a pair of small dressing table lamps. I had a piece of window glass cut to cover the top - be sure to have them sand the edges if you do this - otherwise LOTS of blood will happen! This worked admirably for 10 years. I have no idea what I did with it - think I gave it to a local charity store. It was cheap and it worked and it looked really quite nice in the bedroom.