My blue star has vents on the side so you can't have cabinets next to it. Look at the specs of your range - they should tell you the maximum depth of your cabinets. For my blue star it told me the minimum height for my wood hood (I think 36"). My inspector measures this and will make you move it if it's off by 0.5". Yes, the range sticks out a bit but I'm OK with that.

We absolutely love our RNB. Had it for a couple of years, and it works so much better than any other stove I've ever used. Definitely recommended. I jokingly told my dealer, he should drop all other product lines, as they clearly are inferior compared to Bluestar. Before the remodel, we only had space for a 30" model. I'd love a bigger stove, but even after the remodel we wouldn't have space for 48". And I can't really justify replacing our perfectly good 30" with a brand new 36". But I'm sure, you'll love your 48" model. Dual ovens sounds so nice to have. When we bought our stove, the Platinum series didn't even exist yet. So, we didn't have much of a choice. If I had to buy now, I'm not quite sure, which one I'd pick. The improvements between RCS and RNB are very obvious. But the value proposition for the Platinum feels less clear. In principle, it is a superior product. But from reading reviews, it sounds as if the current design doesn't fully realize the potential of these improvements just yet. The grill/griddle sounds awesome, but then I read reviews and most people are a little disappointed by it's overall usability. The oven burner seems a mixed bag too; although that might be limited to earlier designs which suffered from some growing pains initially. But given how much I love my current oven, I don't really see much of a need to change anything. On the other hand, the little bit of extra BTU would be very welcome. After cooking on a high BTU stove, I never want to go back. It changes everything about how you cook. So, yes, I'd love to upgrade my existing RNB to even more powerful burners, if only there was a way to buy a retrofit kit. And the rest of my concerns are not so much to say that there is anything wrong with the Platinum series. It's mostly a reflection of Bluestar having set the bar so high that my expectations are now unrealistically high of what I'd love to see in their top-of-the-line offering. In other words, I'm jealous of your new stove. You'll love it. Please report back, after you have had a chance to use it for a bit.

Just got our KA delivered, it is replacing our older single door KA. My main motivation for this model (to improve upon what we had) was the freezer compartment that has the thin middle shelf, and the ice bin on it owns rails. I also had issues with our top drawer dragging on items from our lower drawer which would shake the bin causing cubes to fall out of the bin. I hope this design works better, it seems to operating much better with it having it's own rails.

The ranges were redesigned in 2018 and the oven is completely different now. I'm not sure how relevant the older reviews are any more. See https://blog.designerappliances.com/new-bertazzoni-ranges/ for a review of the updated ranges. I noticed an error in the review, they said the Broiler is 15000 BTU, it's only 9000 BTU on the 30" & 48" and 11000 BTU on the 36". The review does mention a studier range base and legs. So maybe the "curling" has been fixed. I purchased the 30" Pro all gas range in November and am generally happy with it. I'm happy with the burners and the range is very easy to clean. The only item of concern is the temperature control for the oven seems to be imprecise, it's either lower or higher that the temperature selected. I've adjusted the temperature on the oven a bit to try to compensate for this issue. It now seems to align at 350, if you select 350 on the control the temperature will come up to 350 on the gauge. But otherwise the control is either lower or higher than what you select, that is select 450 on the control and the temperature on gauge will go above 500 or so. As long as I can trust the temperature gauge, I can always just adjust the temperature up or down. The temperature gauge is different than what is displayed on their website and I find it difficult to figure out what the temperature really is. I have this gauge below, notice the four lines between 250 & 350, yet there are five lines between 350 & 450. There is also a dot above 250 and 450, not sure what the dots mean. Maybe 450 is at the dot above the '4'? Since I don't bake, I don't really need a precise temperature, if I'm off by 20 degrees it shouldn't a big deal. The oven does seem to maintain the same temperature over time. The oven does seem to go below 250, maybe the low is around 220 and the high seems to be around 550 or so. It's kinda hard to really know with this gauge. I'd much rather have this temperature gauge, which is so easy to read: