Bouncing Bet is one form of soapwort. It resembles phlox, white/pastel pink flower, blooms most of the summer. Pretty, but be warned, there is a reason it is called "bouncing" bet. It will be here & there throughout your garden. Not a bad thing really I think, & I've found it pretty easy to pull up if you get too much of it. Easy to winter sow.

"E-mail spam has plunged by more than half since Christmas Day when the world's largest criminal spamming operation inexplicably shut down. Even so, cybersecurity experts have moved to high alert: They fear that top spamming groups might be shifting to sneakier, more lucrative online scams. "If the past is any indication, these guys will regroup," says Fred Touchette, senior analyst at messaging security firm AppRiver. On Dec. 25, the Rustock botnet the world's largest source of the unsolicited messages that inundate e-mail systems went dark, followed by two smaller operations. Spam is difficult to eradicate because it originates from networks of infected home PCs; the Rustock botnet used as many as 1.7 million PCs to send out e-mail ads for fake drugs." Saw this today interesting, http://www.usatoday.com/tech/news/2011-01-11-1Aspam11_ST_N.htm Here is a link that might be useful: usatoday

Are you sign on to AOL 24 hours a day? If so sign off and come back on to reset on some things. Not sure about Spam Filter. Try accepting mail from everyone just to see if you can get it working to accept Hotmail. You can use live help. Or This address will allow you to email your problem for tech help. I used it once and they did reply. http://help.aol.com/help/vtemplates/AOL-ContactUs_2.html Save this address for future use, it's hard to find. Here is a link that might be useful: email AOL

I was forced into renovating a second floor bathroom for numerous reasons. Never having liked the layout, I thought this was a perfect time to change it. The room is 70" wide by 126" deep. I wanted to put the vanity on the left wall, the toilet next to the vanity and then the tub on the back wall, drain to the left, so the left wall would become a wet wall. Problem was, the joists ran across the room, not down. Putting the toilet on the left wall would force me to bore 4" holes through 2"x8" joists. The two joists to be bored would sit directly under the tub. A real no-no. I did a little (clearly, not enough) research on the internet & mostly talked to some local building supply stores. I had an idea that laminating (glued & screwed) 7 1/2" X 30" strips of 3/4" plywood to both sides of the joists might provide enough support that the joists could then be bored. And this is where I was ill-advised. I was assured this would provide enough support, and that with 3/4" ply subfloor followed by 1/2" cement board the floor would be solid enough to support the tile I wanted to install. After completing this portion of the renovation and replacing the subfloor, another trusted advisor spoke up and said that I can't do that. I've since stopped the renovation in order to take the time to figure out what to do so that the plumbing and floor support will be safe and to code; hence, my now having found this thread. As an FYI, in doing my second round of research, I stumbled across these metal joist reinforcers - http://www.metwood.com/products/reinforcer . They look like just the thing I need to solve my support issues, assuming I leave the bathroom in it's current configuration. The problem with them for me is that they cradle the bottom of the joist and I don't want to have to tear up the first floor ceiling in order to install them. So, one of my questions for all you engineering gurus with your mathematical wizardry is, if I were to attach 30" long strips of 1/8" or 3/16" steel strap to both sides of the joists, both above and below the holes, do you think this would provide enough support for a full tub of water and a tile floor? If so, how would you suggest fastening them? Should they be screwed independently to each side, or bolted so that they sandwich the existing laminated joists? Further, should I be using some form of glue or cement to 'laminate' the strapping to the bulked up joists (not that I'm aware of any metal-to-wood adhesive)? Another option I have is to remove one side of the plywood lamination I've done. Then sister both existing joists with a new (at least 6', but as long as possible) joist that has one of the joist reinforcers listed above attached. Due to the construction, the joists are fully supported by a bearing wall on the left side of the washroom so these new sistered joists would have the benefit of being supported on one end. Any thoughts on any of these potential solutions? Thanks in advance for anything shared.