Wow, thanks! Those are some great prices..... Still expensive mind you, but nearly half price off MSRP puts them almost in my grasp. I'm considering not only the Purist whirlpool/air tubs but also the "Sok" tubs, which don't offer jets, but do have the tiny champagne bubbles that cling to your skin (as seen here).... .....in an easier-to-fit rectangular size, and an infinity edge on all sides which allows you to fill the tub right to the very brim - then step in and stretch out with wild abandon, ignoring the waves of water you just sent cascading over the ledge. Did I mention there's room for two? It's so indulgent, which of course is why I want one! here's a youtube video of a Sok tub in action. Even if I had the room I'm probably do without the larger Sok For Two, which is a whopping 104" long. That tub is shaped for two people facing each other at opposite ends; I prefer the arrangement on the supposedly one-person Sok which is still plenty wide and long enough for two (same width, 75"L) but faces both people the same way. Overstockdeals has the Sok overflowing bath w/champagne bubbles & chromatherapy from $6570. (The Sok for 2 starts at $7,200). The Sok has a strangely uneven tub floor; the part you sit on near the back is a step up from the rest of the tub; not sure I'd like that. They also have the Purist oval tub which overflows mostly in the front (though can all around) but offers whirlpool jets that the Sok lacks, plus the tiny champagne bubbles and optional chroma for $3788. If you want just the bubbles, they have them from $2,794; If you just want the tub - no bubbles, jets, or lights, you can have one for only $988 (!) You'll need to check those prices carefully, because there are lots of configurations, several kinds of bubble systems ("relax", "spa", "massage") and with or without jets or colored lights, etc., so be sure you know what you're ordering. I've also considered the Kohler Riverbath which delivers yet another sensation - most of the jets are at your feet pointing forward, so there's a current in the tub flowing from feet to head, washing over you continuously. 66" or 75" whirlpool round whirpools w/chroma start at $6,477, the more practical rectangular whirlpool w/integral fill and chroma, from $6,918. Lots of scintilating choices here.... MDH, would appreciate any other impressions or advice. How did you mount your tub? i.e. in a large rectangular deck that reaches the walls, or an oval support just large enough for the tub as in the above pictures? Are the parts and labor for building the deck and tiling it expensive? Is the backrest and neckrest comfortable to lean against? Are the rotating back jets therapeutic? Do two fit comfortably? (it's listed as a single person tub, but I'd venture the phone-booth of a shower I have now is also intended for one. Never stopped us :-). Is it difficult to climb over the tub to get in or out, and are any extra bars in place to aid in the effort? Thanks!

Just a quick update. I spent days reading material on air tubs and whirlpools and got my decision down to a 36 x 72" Jason and Purebath. To get an outside opinion, I called an online bath dealer in the Richmond, VA area where I used to live (Whirlpooltubs.com, Steve) and after discussing a lot of models, which he sells as well, he steered me to Mansfield, an UN-fancy company that offered a ton of features and everything I was looking for, at a nice price. I ended up with the Baywood 6 Ariance GentleTouch (air bath version) which has back jets with heated neck/back rest, heated silent air (all offer this), included neck pillow, chromatherapy. This combined the features I thought my husband might benefit from (back jets) with the surround air jets, in a quiet system, as we will put the motor on the other side of the wall with insulation. Mansfield offers the Ariance in 3 models: HealthTouch (whirlpool), GentleTouch (air bath) and DualTherapy. I would love to tell you what I think about this bathtub, but we are still building our home and are months' out yet. This dealer was on the ball and very helpful.

I'm in the thinking-about-it stage of redoing my guest bath. It has a shower over tub and I plan to keep it that way. Currently I have a framed bypass glass door that sits atop the tub. In my master bath I don't have a tub but the alcove is the same size. I have an unframed bypass door there. Although the open look of one piece of glass is very appealing, I do not understand how you contain the water, even with your showerhead facing down, and I'm not sure that I want to be constrained to stand in one spot. I don't take wild showers where water gets flung every which way. However, at the end of my shower I squeegee every time without fail. The back door (the one missing in belasea's bathroom) is just as wet and drippy as the one closer to the showerhead. I don't know if it's from splashing or condensation. But I do know if there wasn't a glass door there it would end up on the floor or walls.

Thank you, Scott N!!! The culprit of my problem was the dislodged housing. Threaded or set screw? I was racking my brain because I could not find the screw using my phone in selfie mode to get a good view. With no screw in sight, I assumed my spout was threaded, so I gave it a twist, but I could rotate it only about an 1/8 turn. Luckily I didn't force it further. It was firm past the 1/8 rotation, and I didn't want to risk snapping the copper pipe, so I figured cutting off the housing was a safe experiment since I planned on replacing the spout anyhow. I cut around the circumference of the housing about 3 inches from the wall using a hack saw, being careful not to cut too deeply as not to touch the copper pipe inside. Once that was done, I used some metal snips to cut the housing (the portion closest to the wall) before peeling it off with some pliers. And low and behold, I found the set screw. As you can see in my second image, the screw was far misaligned from the space under the spout. Removal of the remaining parts was simple since I was then able to use an allen wrench to loosen the screw.