skip to main content

Computer Crafts

error in cardmaking-help?

23 years ago

I created the card in Printmaster 10. On print preview all appeared to be correct. When printed the images were of different sizes and overlapped. I have W98, Lexmark x83 printer. This is my first attempt at combining images. I copied the design in the corners and then resized to fit. Any advice? A photo is in the craft forum gallery. Thank you, Rhonda

Here is a link that might be useful: error in cardmaking

Sort by:Oldest

Comments (6)

Tiger_SunnyFla
23 years ago
Hmmmm...Rhonda....it's strange that the Print Preview looked ok, but printed wrong? It looks like you did the (pink check) border, then super-imposed the corners (yellow squares)over it, right?
First, try "layering" the images to see if that helps. In my program (at the top) it says Arrange...then Layer. Send the pink border "TO the Back" See if that helps.
Another thing that you may try....is after you've got the yellow corners, where you want, over the pink border...try to "Group" them to become one image. This is also done under "Arrange".
Where to find this Layering and Grouping may be a little different in your program, but I'm pretty sure they're there.
Hope it helps and let us know how it goes :-)
Tiger
calirose
Original Author
23 years ago
Thanks Tiger! I will definitely give it a go today and let you know if it works. Yes, I selected the border Then applied one corner. I duplicated that corner to each of the other three corners. All corners appeared to be inside the pink border on print preview. I will work with the layering and grouping to see what it does!!!
Rhonda
Related Discussions
Please help! Error code issue with Kenmore 4500 induction range
Q
Comments (4)
Get the application: "APPLIANCE HELP" on your phones. This application it was created to help you fix your own appliances. By using this application you will be able to fix and repair defective components of your appliances as well as maintenance and overhaul. You will be able to read and translate: '' Error Codes'' in order to decide if a repair is worth it. You will have a clear image of what should be replaced or fixed, without being overcharged by a technician, in case you decided to call one. You also can use our free service : " contact us" and a professional technician will help you with your problem. Visit the web at: infotechline911.com
...See More
Help! A lawn care company treated my chemical-free lawn in error.
Q
Comments (1)
What I read about pendamethalin says it should be safe after about 7 days, the other, Vessie, contains products that are purported to be safe when dry although I would not allow children to play on grass so treated for 7 days as well since most organic sources recommend not using grass clippings from such lawns in a compost pile for at least two cuttings. If the owner of the at fault "lawn care" company does not offer to pay your natural lawn care company for tat least the rest of the summer there is very little you can do since the mind set for most people today is that those products are generally recognized as safe even though we know they are not. The play structure can be hosed down several times to wash off any of the product that may have attached to it. kimmq is kimmsr
...See More
HELP! new construction window placement error
Q
Comments (19)
You also have to check the local code requirement for windows being this low to the floor and might need to have tempered glass. R308.4.3 Glazing in windows. Glazing in an individual fixed or operable panel that meets all of the following conditions shall be considered to be a hazardous location: 1. The exposed area of an individual pane is larger than 9 square feet (0.836 m2), 2. The bottom edge of the glazing is less than 18 inches (457 mm) above the floor, 3. The top edge of the glazing is more than 36 inches (914 mm) above the floor; and 4. One or more walking surfaces are within 36 inches (914 mm), measured horizontally and in a straight line, of the glazing. That being said, you might not have room for a transom, depending on how much the soffit will drop on the outside and how much room you will have left. Good luck
...See More
Help! Need advice on a showroom error
Q
Comments (7)
@Brendol Scholz I get that it's actually what non grain matched was but the issue is their rep did NOT give us the right description. they told us the wrong info. over and over and over again. And actually when i asked her the difference between the two (this was after we signed) she confirmed that both used the 96" and she didn't know what the difference was and then pawned me off on the wood folks to find out. i guess i'm really upset because i signed a contract under false information because their designer didn't know what she was talking about. actually there were red flag after red flag now that i look back at it but they were all small things she was wrong on. i mean she told me certain configurations were what i'd get (she actually drew them on the plans) and then later found out she's wrong, she told me a drawer system wasn't an option and the wood rep then corrected her, she told me she ordered a door and it was already shipped and the wood guy then told me that wasn't actually the case, etc. oh and i ordered a horizontal grain and then over a week after she supposedly ordered it they emailed me they couldn't do a horizontal on one portion. i didn't even get a phone call. this was just one of the many screw ups she made and i guess now i'm paying the price for her lack of understanding (which ok was mine too but only because i trusted what the representative was telling me, which i should be able to do). i would have been better off w/o a designer in this scenario.
...See More
calirose
Original Author
23 years ago
Okay Tiger. What I learned is to place the corners on the "border" page (rather than on the "complete" project page) and then click finished editing border. That held the corners in place. My program must "group" itself, because group was grayed out, and only ungroup was clickable.

I definitely think I just need some practice!!! LOL My hubby was real proud that I had accomplished any of it. He thinks I tend to expect perfection the first try (and I do!)Thanks again!
Rhonda
Tiger_SunnyFla
23 years ago
Glad it worked out for you, Rhonda! I have found the best way to learn these programs is Play, Play, Play! LOL!
And...Welcome to the board!!!
epcheal
11 years ago
I have a problem in my printer. Can anyone fix my issue?
steiconi
11 years ago
epcheal, do a google search with your printer model and problem.

Related Stories

ORGANIZING Do It for the Kids! A Few Routines Help a Home Run More Smoothly

By Alison Hodgson

Not a Naturally Organized person? These tips can help you tackle the onslaught of papers, meals, laundry — and even help you find your keys

COLOR Pick-a-Paint Help: How to Quit Procrastinating on Color Choice

By Laura Gaskill

If you're up to your ears in paint chips but no further to pinning down a hue, our new 3-part series is for you

GARDENING GUIDES Great Design Plant: Common Boneset Helps Good Bugs Thrive

By Benjamin Vogt / Monarch Gardens

Support bees, moths and butterflies with the nectar of this low-maintenance, versatile and tactile prairie-style plant

WORKING WITH PROS 3 Reasons You Might Want a Designer's Help

By Apartment 46 for the Home

See how a designer can turn your decorating and remodeling visions into reality, and how to collaborate best for a positive experience

STANDARD MEASUREMENTS The Right Dimensions for Your Porch

By Steven Corley Randel, Architect

Depth, width, proportion and detailing all contribute to the comfort and functionality of this transitional space

CONTEMPORARY HOMES Frank Gehry Helps 'Make It Right' in New Orleans

Hurricane Katrina survivors get a colorful, environmentally friendly duplex, courtesy of a starchitect and a star

REMODELING GUIDES Should You Stay or Should You Go for a Remodel? 10 Points to Ponder

By Ventana Construction LLC

Consider these renovation realities to help you decide whether to budget for temporary housing

DECORATING GUIDES Decorating 101: Do It Yourself or Hire a Pro?

Learn the advantages and disadvantages of decorating alone and bringing in skilled help

VACATION HOMES Make Your Vacation Home Pay Off

By Laura Gaskill

Renting your vacation house when you're not using it makes good financial sense. These tips can help

WORKING WITH AN ARCHITECT Who Needs 3D Design? 5 Reasons You Do

By Dylan Chappell

Whether you're remodeling or building new, 3D renderings can help you save money and get exactly what you want on your home project

Sponsored

More Discussions

Looking for a Reliable Outsource Call Center

1