Yeah, they are all for the same type of glass. This place's Starphire prices are lower than the others too! I guess I will try to get more information on the clips from them and see how they compare. The only difference is this place has many outlets that does car windshields, commercial glass etc and a few that do residential glass including shower doors. The other two are specialty places that do mainly shower doors. Maybe that's a good enough reason to stick with the specialty guys!

Ours was 3K, included all parts, glass, labor. The shower is a modified square shape a square with a slice off of one of the corners. Of course, that's where the door is. He really struggled with getting it all to line up. Mostly because the standard door wasn't the same size as the opening for it and there is an additional trim piece of glass beside the door. Looks great in the end, fainted at the price. Good to see that others are familiar with these kind of numbers. He did everything, measure, fabricate, deliver, install. They were very tall pieces of 3/8" tempered glass. It was no picnic for him!

You have valid concerns and we take extra measures to acommodate steam vapor escape by treating the ceiling and/or adjoining painted surfaces outside the shower with usually an oil based primer and sometimes topcoat of paint . Steam rooms require a few things to be just right and if so you shouldnt have excessive release of vapor. Starting with the proper sized generator for the "adjusted cubic ft" A proper glass install with the acceptable tolerances ( we use sweep and bulb gaskets to compensate for minor inaccuracies and zip our steam showers up and then utilize the transom.) A transom smartly placed in relation to the Fan that also needs to be the proper CFM for the room and other hvac concerns,. Our fans are always on a timer, and preferably jumped on the same circuit as the showers interior light. You want the fan on from the start of the shower and remaining on for 30 +/- mins after you get out. I always suggest opening the transom and swinging the shower door IN to the shower when done. On this steamer ceiling we used the existing bathroom fan and planned ahead and had the painter coat our cedar install with sikens marine grade topcoat. Hope that helps a bit in your effort to rectify your concerns.-best

Thanks everyone for your comments and help. I took your advice and found another company. The doors will cost $1500. The quality is excellent and the company’s references, from several interior designers, were impecable. I can hardly wait the three weeks for them to be installed!! Photos to follow!