Many thanks whirpool_trainee. The current dw is a Bosch, +8yro and we've repaired it twice at considerable expense along with the "fix" for the panel associated with perhaps a "fire" (no charge by Bosch for the recall). We've spent more on the dw than it is worth. Our kitchen is open to the den and the noise interferes with conversation, tv, music etc... hence the search for something quiet. Your info on the XXL helps! Miele really needs to fix this installation page; it's the same for all models and inconsistent with their specs. The ADA model has a 6" kickplate and I'm told loses about 2" inside, also it is only average on Miele scale of "noise". attofarad; we think alike :-D I really want your interpretation and my interpretation to be correct! I talked to Miele again today; they are very nice and patient with my questions. The rep asked a technical person who said the dw will fit and if it does not they will take it back. They also told me the dw cannot be installed without the feet since the cord exits the unit from the bottom and there is some kind of "drip pan" too. My plan is to have the old dw removed and measure then measure again before ordering. Miele is pretty pricey, but it if lasts for 20 yrs then it's a good deal. Truely, I appreciate the responses from whirlpool_trainee and attofarad.

I bought the Miele G5775 SCSF and paid the overpriced fee to have Miele do the install directly. This was for a new house. Just moved in and tried to use the dishwasher for the very first time. It immediately went to a lockout state with an error message, and will not even run the for the very first load. Called Miele and was told it would be 10 days before they could get a tech to even look at it (and I'm hoping he won't have to wait to order parts). Needless to say I'm not at all pleased moving into a new house with a new top-line (supposedly "reliable") dishwasher, then having to hand-wash dishes. Miele's so-called "Concierge Service" is a joke. Don't know if Bosch is any better.

I installed my Miele Lumen dishwasher last year. And the reason I did, is because I used to sell them and know 1) how great they are and 2) how simplistic they are to install... to a point. The reason I say this is that the installation instructions that come with the machine are basically a quick to guide used by Miele installers, not the general public. To be honest, I did have to do a Google search and look up a couple of videos. But once I did, it was pretty smooth. I would agree that Miele’s website is confusing and atrocious and they know because I’ve told them. Lol I would help my customers all the time with trying to navigate. Just horrid. They did revamp a short time ago, but I haven’t had the need to navigate and cannot comment. All Miele dishwashers come with a 1 year manufactures warranty. The homeowner would receive an additional year, if they have a certified Miele installer to the job, for a total of two years full pars and labor. The warranties are never lost by DIY installation. Miele dishwashers come self contained and all come with a power cord, an inlet hose and drain hose. If you need a hardwired installation, you can remove the plug and hardwire the unit at the bottom front. everything is accessible from the front. I did not have to do this step as I plugged my unit in. I did have to get my Dremmel and make a slightly larger access hole in my cabinet for the drain hose though. One thing to note is that you must make sure you have a high loop on the drain hose for proper function. This means that the hose must Look like an inverted letter “u” under your sink. I bought a hook and just placed it so it would hold. Easy. The dishwasher will come with a flat shiny piece of stainless. Most will think this is the kick plate. This is not for that use. It is actually used to shield the underneath front edge of your counter to protect it from the steam when the dishwasher pops open to dry. Miele will give you tiny brad nails (if needed) and silicone to seal and attach. This is the first step prior to installing the machine. Next, you slide the dishwasher in place minding the cord and hoses. You level the rear legs of the machine by turning screws located on the front bottom. You turn the front feet to level those, making sure the machine is level side to side and front to back. Then secure to counter and side walls with included hardware. I then had to place my front panel onto the machine as the model I purchased was panel ready. I then turned two screws on either side of the door front to adjust the door hinges. The hardest part was having to cut the European 6” height kick plate (black plastic piece) to a 4” US height with my Dremmel and attaching. It was super precarious. That took me the longest believe it or not. Have a box of salt at the ready, along with Rinse Aid and either a tablet or powder detergent, as you have to run the machine once before use. Liquid detergents do not work well at all. I use the Miele dishwasher tabs as they breakdown quicker and get to washing faster. They are meant for you to get the most out of your machine. I will say that improper installations on any branded machine, account for the majority of dishwasher failures. However, if you read the directions and watch a few videos, your Miele will give you 20 years. This is why I own one. And it is so quiet, the first time I ran it (38 dB) I thought it wasn’t working. But it was! My dishes and utensils always come out sparking. If you are really nervous about installation, then I would have a certified Miele tech do the job. I managed and installed it properly. Leveling is key and the high-loop is imperative. If you have any questions, please let me know and I’m sure I could help. Sorry for the sideways images. I‘m uploading uprights and this is how Houzz is laying them out.

You're either going to pay the contractor or you're going to pay (some extra) for Miele to install. I have had a number of problems with Miele, including horrible customer service, but they did (eventually) solve the issues. I would rather have the Miele warranty than a 3rd party one. My Mieles were not installed by Miele, but they were still covered under the extended warranty (perhaps because the issues were not caused by incorrect installation?)