My grandma eats sweets including homemade pies with 1-2 c sugar per pie, loves sweets in general, eats too many fried foods for my taste, doesn’t eat paint chips, bathes in a porcelain tub, and was JUST moved to a nursing facility this year since she’s losing her mobility (mind is still intact) and in another month she will be celebrating her 100th birthday. You don’t have to live in a bubble to live a long life. Much of your life expectancy is predetermined in large part by genetics. Use common sense and don’t lick the bathtub.

Well, phooey. I taped it out in the bathroom with blue tape last night and it looked like it would fit, but with too many nos, I'm back to the drawing board. Interesting thought, Vix. Right now we don't actually have a toilet room, so much as a separate toilet "area" (there's no door, and the closet takes up too much room to add a door), but it's on my agenda to create one. In our house, it's very necessary. I generally use that bathroom to try to FIND privacy, only to have 3 people (and sometimes the dog) follow me into the bathroom. I'm looking forward to having a door that locks and a fan so that I don't have two little people handing me the TP and asking whether I'm doing number 1 or 2 (oh, and the 1 year old likes to flush while I'm ON the pot; so I've got my own special cold water washlet), while DH decides that he absolutely has to shave and brush his teeth at that exact moment. Now if I take a hike to the guest bath on the other side of the house, all three just follow me AGAIN. Sometimes when I have insisted on locking the door in the guest bath (no way to do that with our LOUVERED -- why??? -- pocket door in the master), my one year old plopped down prostrate outside the door and cried until I open the door. For my W/C, I want to put in a LOUD fan; no whisper quiet for me. Maybe I'll even add a radio. :) The way I'm seeing it, I can either get rid of the long vanity altogether and live with a fairly small vanity, plus a tub and shower, I can skip the tub and live with the kids' bathroom on the third level as the only room with a tub, or we can bump out that weird corner jog, which would give us an additional 49'' X 27'' space -- enough to fit a 5X3 tub, 5X3 shower and keep the two vanities. But that sounds very expensive and will require carefully removing and replacing the siding to match the existing. DH's response to all this was "why do we need a tub?"

Since you have 3 bathrooms that sound quite large, I would leave a tub in one of them and then do exactly what you want in the other 2 bathrooms. Whoever designed your house sure did love the long vanities! I'm stunned by those measurements. It could look a little odd to have counters that long with just one sink, so I would consider adding tall storage cabinets (if you could use more storage) alongside a shorter length countertop/vanity. As for one or two sinks, I'm building our new main bath with just one, because I like to have counter space to spread out on. That's fine for the way we live - my husband and I never need to be in the bathroom getting ready at the same time. Nor did my kids ever have a problem sharing a single sink in our previous house. But some people would refuse to buy a house that had just one sink in the master bath. I don't think there's any one right answer for this.

"I could also just get a pull-down faucet for the sink and aim it at the tub to fill it." You could - but you won't like it. The most one of those will fill is 2.2 gallons a minute - some less that that. Divide your tub's capacity by that and you're looking at 20 minutes to fill +/- Not good. beekeeper - I have one of these and have placed more than half a dozen in projects over the past few years. What you get for your money is a machined brass body that mounts in the ceiling or wall and a plated trim piece. The body is a substantial piece of hardware and chrome,brass, nickel plating costs $$$ too. Whether that's all worth 500 + bucks, is up to you. Like davidro says, it doesn't matter what the delivery system is, this is just an opening for hot water to come out of, albeit one with a bit of engineering. GD & Spanish - the splashing is very much dependent on the mounting height of the unit AND the tub selected AND the location of the water column inside the tub. Mine hardly splashes at all. The ones I have seen that splash only do so for a minute or so until their is enough of a pool in the tub to counteract it. Flat bottom tubs with tall ceilings are going to splash more than one from 7' into a sloped contact point in the tub. Besides , we're talking water in a bathroom, generally tiled so what's the big deal ??? It's not like the amount of splash is the same as taking a shower and leaving the door open. 2. While you are correct in that "the water cools off much more than it would from just a regular tub filler", it's not as if it cools off enough for anyone without a thermometer to tell a difference, and a very sensitive one at that! Sure the air cools the water more from a stream falling from 8 feet than one falling from two feet. But bath water that is 100 + degrees is not going to cool down to 90 deg. in the xtra 1-2 seconds it takes it to fall from the ceiling- get real. Additionally , that filler produces a very dense column of water (laminar) that has little to no air in it, so one might argue it will be hotter and less prone to heat loss than a "regular" filler that introduces room temp air into it's stream - thus cooling it off on it's way to the tub. So don't worry Spanish -your tub will still be plenty hot with that filler if you choose it. IT'S A NON -ISSUE people. I've already alluded to the real issue for lower tub temps - FILL TIME. That's directly related to the delivery system ( valve). If your valve and accompanying filler will only deliver 5 gallons a minute it's going to take a while to fill an 80 gallon tub, and there will be some heat loss. Select a valve that delivers 20 gallons a minute and you can be soaking quicker that most people can undress. Here is a link that might be useful: laminar valve body - see page 2