I'll try and post a picture of my grill tomorrow but I did compare both the Virco and the smaller and larger model of the Member's Mark before purchasing. I would say that if you want a smaller grill and don't mind not having a built in smoker box and extra burner then go with the Virco. For me, I wanted a grill that I could easily build in later and that was comparable in size and quality to the Viking and DCS units I had been looking at for comparison. I really had no idea that this grill was as nice as it is. My wife had originally spotted it and told me to go look at it. I was very skeptical because first off it was at Sam's Club (no offense) and second for the price, $1,499.00, I figured it could not compare with the high end units I had been looking at for around $5000. After seeing the unit and thoroughly checking it out I was proven wrong. It is solid double walled stainless throughout (drawers, cart, lid and cooking grates) and looks similar to the Virco unit only larger. I would say aside from size the other differences are that the lid is double walled stainless throughout and will probably not discolor from heat as easily. There is a seperate burner for the smoker box and this burner is stainless also. The remaining burners are heavy porcelain coated cast iron and appear very well made. There are two central pull out drawers on ball bearing glides and a seperate door on both the right and left of the drawers with the right door containing a paper towel holder and spice rack. The propane tank is fully enclosed on the left and is on a locking pull out slide. There is a seperate brass side burner and a rotissere with a steel encased motor unit that I haven't tried yet. There are also two stainless side shelves on each side that fold up and lock. The unit is for the most part, welded and comes fully assembled on a steel pallet that was forklifted on the back of my pick up. It weighs about 450 lbs and you'll need at least 4 strong friends to help you unload it! That's the long version and again I am very happy with it so far and would encourage you to go and look at each of the units for comparison. The Virco is a really nice unit and I know it's been beat to death already on this board but between the smaller Member's Mark and the Virco, I would have probably gone with the Virco. For me, I wanted a bit bigger grill with the built in smoker unit and something that I could build in later on and was willing to spend the extra money. Good luck!

Last year I did a search for built in projects and could never find any info. I've even posted on here acouple of times to see if anyone had done this before. To no avail, I couldn't get to one DIY project for grills. So, I hope that my completed project will be able to help others out there contemplating building there own built in brick grill. Memorial Day BBQ was great. I rotissereed two teriyaki injected chickens and they were great. We also grilled some pork ribs, rib-eyes, kabobs, and pork loins. Everything was superbs. The grill is better that I ever expected. I literally turned on the rotisseree and walked away until they were done. Couple of questions. I cleaned and oiled the covered but still have that browning problem othere have talked about. Whats the best way to clean the cover. Thanks for visiting.

Alek, I enjoyed looking at all the info on your web site. Recently I saw a NG Y0660 that had been returned to Sam's Club because the buyer really needed the LPG version. It was a bit dented-up in the front, and missing the rotisserie parts. Sam's wanted $700 for it. I started the task of trying to figure out just what it would take to convert it to propane and to repair the cosmetic damage. When I realized that the valves would have to be replaced, as well as the orifices, both doors and one drawer, as well as all the missing rotisserie parts, I almost bagged the idea, but decided to call Grand Hall and check on parts prices anyway. Am I ever glad that I did! The prices were so reasonable that the total cost to convert to LPG and restore the grill to new condition was only $270.00 including shipping. When my offer of $500.00 was accepted by the manager at Sam's I picked up the grill and ordered the parts. I've installed them all, with the exception of one valve that was not correct, a missing bracket to mount the rotisserie motor, and slides for the tank drawer ... basically just "noise-level" problems. Haven't had a chance to use the grill yet, as the weather hasn't been too cooperative, but I'm looking forward to it. My total cost for an "almost new" Y0660 grill is now $770.00. ! ! ! ! ! ! S C O R E ! ! ! ! ! ! There are a few things that I've learned from this exercise that I'd like to pass along: 1) Grand Hall's customer service folks are great! Their policies are pretty good too ... with the incorrect part it was "Oh, we'll get a replacement out today", not "Send it back and we'll see ...". 2) If you know what you need, and how to ask for it, you *CAN* buy the parts to convert these grills from NG to LPG and from LPG to NG. 3) The parts costs are ludicrously low ... the main valves, which include the orifice are only $5.00 each, and the side burner and rotisserie valves are $8.00 each, as they include a little more hardware. It probably makes more sense to just buy the darned things than to do the drilling for the LPG to NG conversion, and it's WAYYY better to buy for the NG to LPG conversion than to try filling and redrilling with smaller holes. 4) Rather than actually replacing the valves, which can be difficult to get off the manifold of the Y0660, it's better to just swap the valve cores and the orifices. I don't know for sure if the valves are common between the Y0660 and the smaller Y0101XC, but the conversion pictures on your site look identical. For example, the main burner gas valve part number is P03222007A for LPG. Also, the valve bodies have the number "0404A" cast into the side. This is the same for the NG and the LPG valves. How does this compare to the part number & valves for the Y0101XC? I have a full set of parts for anyone wanting to convert from LPG to NG. I'd also be interested in that guage that you've got left over from your conversion,...

I've had my eyes on the Member's Mark grill at Sam's for a couple years now... My Sam's sold their last one about 2 months ago... then they got the other model with the enamaled steel lid, and smaller cooking space... I had very little interest in that model... However... after a month or two absense, my local Sam's club just got about 10 new Member's Mark grills in stock. This after they've alread started stocking Christmas stuff... So... I know for sure that some Sam's Club stores are still getting these grills in... One thing always has me scratching my head on these MM grils, is the cooking grate... those 'bars' must be hollow tubes, as they are not all that solid it seems. I can easly bend them with my bare hands... I'm not sure it's a problem, but just something I noticed... Theose grates would probably also weigh about twice as much if they were solid... Anyone ever bend their grates on these grills when using a little extra elbow grease when brushing these grates off?