SHOP PRODUCTS
Houzz Logo Print
imagardener2

Easy (cheap) rose trellis

imagardener2
13 years ago

This trellis was very easy (if you have someone handy with cutting conduit. This time I had an assistant :-))

{{gwi:285948}}

{{gwi:285949}}

{{gwi:285947}}

Materials:

(4) 10' long 3/8" diameter rebar

(2) 8' conduit to fit rebar

wire

metal cutter (jigsaw handheld with metal blade)

Trellis part

1. Cut one 8' conduit into (4) 2' pieces

2. Pound these into the ground about 1-1.5' deep to hold rebar

3. put each 10' rebar into conduit, push into firmly

Top part

4. cut (2) 20" pieces from other conduit

5. Cut 2 notches in each piece to make a"U" shape

6. Bend slowly or metal will break

Attach "U" pieces to top of each pair of rods

Wire both together when done

This trellis is very stable and should survive most winds and weight loads. You could even fill the bottom conduit with epoxy if you never wanted to move it.

Tomorrow I'll attach the rose to it's new trellis.

Denise

Comments (6)