Window Cost - ?Stupid Questions?
Scott Trudeau
last year
Featured Answer
Sort by:Oldest
Comments (10)
Joseph Corlett, LLC
last yearRelated Discussions
Stupid question about DWs with panel-ready doors
Comments (8)It probably depends on the maker. Every one I've seen comes without a front panel. You can use it. The works are enclosed enough, but it's machine cowling, not a finished panel. This is different from my panel ready warming drawer which came with a front panel and handle ready to be removed. My theory is that they don't sell enough panel ready for it to be worth running separate inventory, that it would cost more to do than the savings from the panels. So there might be some dishwashers like that. Regarding research, panel ready dishwashers tend to run on the high end, mostly because it's a low demand item, due to the extra work and expense panelling is. Still, they're the same dishwashers as the same model that comes with a panel. Perhaps you should choose a major maker, like KitchenAid or Miele, and look at what's available at what price for panel ready, and how much you could save getting a standard finish like stainless would save you. Small carpentry jobs can cost more than each piece of a larger job, but I'm guessing it would be a few hundred dollars plus materials from a good carpenter. Maybe a bit more if there's a minimum. Added to the higher end DW, it might not be for you with everything else that needs fixing. If it's insured at replacement cost, it might be worth a splurge. If you can salvage the old DW and at least give yourself some breathing room before you have to make yet another expensive decision, that would be best. Other possibilities: You can buy ready made dishwasher panels from cabinet companies, especially for integrated models. They do require installation, however. You could see if one was close enough. You could also just use a nicely finished piece of plywood, and stain it as close to your cabinets as you can, paint it with chalkboard and/or magnet paint, or bright red, or, if you're talented, trompe l'oeil paint a kitchen matching drawer stack and handles. Or you could wrap your plywood with sheet stainless or copper or something else interesting. You do need an installer who can fit and instal the custom panel no matter what. It requires being able to follow instructions, drill and use screws. They usually provide a template. Some appliance installers will attach a panel for you and many won't touch it, so it takes being a bit handy. Doing something like that, that you can do mostly yourself, and worrying about the carpenter down the road, is also a possibility if you think you'd be happy living with something different. Best of luck with all your repairs. Sorry for rambling. :)...See MoreStupid question: what exactly goes outside of the studs?
Comments (16)Here's what I'm doing, based on reading at Building Science.com and the architect -- Fiber cement planks furring house wrap, taped XPS @ 2" shiplapped (R10) 2x6 @ 24" o.c. OVE framing damp cellulose cavityfill (R19) sealed plates/sills & penetrations; foamed rims to R10 Sealed drywall latex paint AT the corners I'll use let-in 1x4 to provide shear walls Whether this will suit your purposes or not depends largely on your climate -- I'm in north Georgia so it is mixed-humid here. If you're in FL or AZ or MN or on the coast of OR makes a big difference in what will work best for your situation. Interesting reading at BuildingScience.com, as I said. Best wishes, JWilson...See MoreStupid Question But So Desperate! (Paint Colors)
Comments (16)Hi Cath- I don't know of a website that let's you do what you had in mind. But, I have oak cabinets and oak trim in pary of my house and have lived with it for lots of years. I do have a beigey carpet which has gold in it so that may make a huge difference in my advice. anyhoo, we painted a limesicle green color and it's really quite nice with the oak. So much so that I'm really weighing whether I'm going to paint my cabinets some day or not. The oak is starting to grow on me! In additional to green, blue would be the other color I'd be considering if I had oak cabs/trim and grey carpet. anyway, if you post a picture of your room I'm sure that folks here can help photoshop some ideas. Sorry the post didn't go in the intitial direction you wanted but lots of people here will help. Oh, one last thing, Maria Killam had a great post about a similar topic lately. She wrote a topic about "what to do if you move into a house that has a carpet that you hate". The guidance she gives I think applies here even though it's the trim that you dislike and not the carpet. Here is a link that might be useful: Maria Killam: what to do when you hate your carpet...See MoreStupid question about plywood island top
Comments (8)I need something that is about 4' wide, and DH and I have absolutely NO woodworking skills to join 2 pieces of butcher block together, as well as to make a nice finish cut and edge. I would really go with Ikea butcher block for now if we could join them, but it requires skills way over our heads. I thought about temp laminate, but again-the width issue. I'm not bothered by being careful with the tabletop. Even when I eventually order the walnut, the island will be more used as a table than a work surface. I'm going to go with a furniture finish on it, and definitely won't be cutting on it or using it as direct food prep. It's actually going in my breakfast area, which lies between the family room and the kitchen cabinet area, and I am doing the island/table really for the benefit of having additional convenient cabinetry to store the rotisserie, mixer, deep fryer, and any large appliances I dont use much, as well as allowing it to function as an extra "work" surface and buffet area. It looks like the walnut top will cost at least $1500, so I'm not totally adverse to spending a hundred or 2 on a temp top. Are there other reasons I should steer away from the plywood temp (maybe for a year or more) or does anyone have ideas?...See MoreScott Trudeau
last yearlast modified: last yearUltra Windows
last yearM Miller
last yearScott Trudeau
last yearHomeSealed Exteriors, LLC
last yearWindows on Washington Ltd
last yearWindow Genius
last yearlast modified: last yearWindows on Washington Ltd
last year
Related Stories
5 Questions for Houzz Design Stars
Post Ideas for Updating an Exterior, Balancing an Off-Center Window and More
Full StoryWINDOWSModern Homes Embrace Mixed Views on Windows
Sure, there are walls of glass. But modern architecture affords the design freedom to have small, narrow and oddly shaped windows too
Full StoryWINDOWSShould My Window Trim Match — or Contrast With — the Sash?
The short answer: It depends
Full StoryTHE ART OF ARCHITECTUREArchitect's Toolbox: Partner a Window With Its View
Vistas meet their match with windows that consider the scenery and the overall feel of a home
Full StoryDOORSThe Art of the Window: 12 Ways to Cover Glass Doors
Learn how to use drapes, shutters, screens, shades and more to decorate French doors, sliding doors and Dutch doors
Full StoryREMODELING GUIDESConsidering a Fixer-Upper? 15 Questions to Ask First
Learn about the hidden costs and treasures of older homes to avoid budget surprises and accidentally tossing valuable features
Full StoryARCHITECTURE5 Questions to Ask Before Committing to an Open Floor Plan
Wide-open spaces are wonderful, but there are important functional issues to consider before taking down the walls
Full Story
millworkman