The system at home can read the fles we need to read. The system at the office is about 2 years newer. The system at the office is the one having problems. I need not to introduce any new unknown items into this problem. The system at home can read all these files so it is not the version of software that is the problem. Also, we tried to update the system at the office to ver 8 and still could not read the files so we did a system restore on the office computer to take it back to the 6 version. There is something else in play here. I will take a look at foxit as suggested. Thanks

If you do decide to remove AR please consider using REVO. Since v5.0, AR has been getting larger and larger while integrating deeper into the O/S. It can be a real bugger to remove with it's own utility if you can at all. I've seen corrupt uninstaller reports when trying to do so. Also, if you do decide to install the current version of AR I would suggest removing v5.0 first. My recollection is during the v3.0, v4.0, v5.0 era all too often those who attempted an overwrite actually ended up with two versions installed via the same folder. DA

cheerit, you might try asking this at the graphics & scanning forum. I bet someone there can help you.

You could use stucco mould for the casing that trims the door jamb. You can get it in detailed wood form similar to most door casings. You will have to fill the voids between the jamb and your trimmer/jack studs,( i'm assuming your term as "bucks"). I would suggest low expanding foam to fill those voids. Foam them up and let cure, smooth off the excess so that it is flush with the trimmer/jacks and the jamb. I'm also assuming where you state "stucco both sides" to mean back to the original adobe, (or the use of adobe). Similar to stucco, you will need some underlayment such as felt plus some rib lath metal to give the mud something to grab on to. Work up with several coats letting each coat dry and feather it back into the existing adobe on the walls. Here is a link that might be useful: stucco mould