After many hours of reading posts on Houzz about EVERYTHING from appliances to paint, countertops, backsplash, sinks, faucets, pantry’s etc. I thought I’d thank the community here and share a pic of the final outcome of our remodel. The wall cabinets and trim are painted to match the cabinetry and trim in joining rooms but it’s basically SW Alabaster. The range hood is repurposed from an old antique carved mahogany fireplace mantle I found. I love my Taj Majal countertops and sealed them with “Granite Gold” sealer but now I’m considering having them professionally sealed as I was juicing carrots one day, spilled a little of the juice and although I wiped it up immediately I could see where some of it was absorbed into the stone. I tried to remove it with several different things to no avail. It’s not terrible but I know it’s there and I have yet to find anything to get it out. I’m now shopping window blinds and I’m sure with the help on Houzz I’ll find something appropriate. Anyway, hope the pic helps you or someone out there! Good luck!

Laurie, Here is a picture of the bathroom with translucent driftwood and Taj. I can't find one right now of the island and we're actually not home. If you want one of the island, I'm more than happy to do that when we get back in a couple of days. Are you looking at Kraftmaid cabinets? I will tell you, we've had ALL kinds of issues! If I were to do this again, which we never will, I would NOT get KM! Especially from the box store we went through. UGH The finished project looks nice, but ........................................ Also, this piece of Taj in the bath is a different slab than the kitchen. It doesn't have as much gray as the kitchen. The kitchen is a nice blend of cool AND warm colors. Bobbi

The Torquay has been a favorite of mine for a long time. However, you need a good size sample of it and the paint test samples to get right hue.

You can't use the Elkay ELXUFP362010PAO to which you linked becaust it has a full apron and requires a cabinet that accommodates a full apron sink. If you're not getting new cabinets, you'll have to use theElkay ELXUFP3620PAO to get the Parchment color you want. It's easily converted to a workstation sink by having your top fabricator leave a 1/2" rear reveal and having your handyman rabbet a cutting board which is much easier than having him alter your cabinet doors to be able to use the full apron sink. The Elkay ELXFDB3620BGRTO is a possible short apron workstation alternative, however, you'll have to get it in Ricotta which is bright white. Either sink is 36", so your refacer is going to have to leave you a left and a right side dummy drawer to butt to the apron and cover the remaining 6 " or so. It will look fine. I'd get the 3cm. "Is there an advantage to using an apron front and single bowl versus an undermount & double bowl?" Yes. An apron front sink can help greatly with seam placement and veining/movement matching because the only place the slabs touch is in the rear, mostly out of sight and the seam is half covered by the faucet and splash. 98% of my sink replacement customers go from a double full divide to a single bowl. 1% get low divides and 1% fully divided replacements. "Also should we try for a sink deck? Sink cabinets are 48 inches wide. 25 inches deep. We would like a large sink." If you want a 48" sink with an apron that fits perfectly without door alteration and has a faucet deck, you'll have to go custom stainless steel for 4K or so: Bars in islands are out of style right now. It isn't the difference in fabrication costs as much as it is in reworking the electrical, cabinet and wall alterations, etc. No matter what quartzite you choose, make your fabricator take you to the homes of jobs he's already done so you can verify he knows the properties of the stones he sells so bleeding adhesives and other catastrophies aren't an issue.