Wrought Iron fencing?
4 years ago
Featured Answer
Sort by:Oldest
Comments (9)
- 4 years ago
Related Discussions
Suggestion for vine for wrought iron
Comments (6)Try some climbing roses. My mom have some on our wrought iron fence. I will try to post some pictures for you. You could also try mexican flame vines they have wonderful deep orange red blooms. They do die in the winter though....See MoreWrought Iron Fence rusted in 6 months
Comments (2)Watewater is hard on ferrous metals. Just the mist could do it if it happened every day. The sewer plant I worked at about 10 years ago had every chain, grating, and hand rail replaced with aluminum and stainless and this is stuff that was never in contact with the sewage. If you could turn of the spayers for a couple days it might be possible to strip, prime, and repaint that part of the fence with a chemical resistant epoxy paint....See MoreWrought Iron Fence
Comments (4)quote" The fence company says this swaying is normal "quote This is most definitely wrong. quote" two part epoxy. A person can build bridges with this stuffThis is most definitely right. I'd suggest putting "two part epoxy" in Google Look for structural application epoxy. It's primary use is to fasten metal to concrete. A friction based red-head anchor is not what you should use for fastening a 6' iron fence to existing concrete. Ask your fence builder if he knows of a White Cap Supply nearby. They stock the product and the dual caulk gun. In the meanwhile don't lean or push against the fence panel. The chances of it going down are slim, but the chances of it busting out a sizable chunk of concrete around the anchor are high. See ya, Kelly...See MoreDock/Deck - Design/Disaster?
Comments (1)You drawing of the lot shows your deck over the property line, why? Any time you deal with making changes to a structure near a property line you want to make sure to get it right. Otherwise you run afoul of a lot of potential hassles. If you're going to overhang the deck then why not just make it squared instead of the angled shape shown in the drawing? That and the pictures show none of the wrought iron railings you mention. You'd do well to discuss the hangers and materials with the piling contractor. When they mention 16" finish height, are you sure they don't also mean the railing?...See More- 4 years ago
- 4 years ago
- 4 years ago
- 4 years ago
Related Stories
CURB APPEAL10 Gorgeous Gates That Make a Stylish Statement
From wrought iron masterpieces to simple wooden designs, there’s a gate for any garden
Full StoryLIGHTINGWarm Up Your Home with Old-World Wrought Iron Lighting
Traditional chandeliers, pendants, orbs and lanterns glow with European Style
Full StoryFENCES AND GATESA Deer Fence Can Be Decorative as Well as Protective
You need a monster-size fence to shelter your garden from deer, but it doesn’t have to look like a monstrosity
Full StoryLANDSCAPE DESIGNGood Fences, Good Neighbors — and Good Views
See-through vertical fencing connects a yard with its surroundings while keeping children and pets safely inside
Full StoryGARDENING AND LANDSCAPING12 Inspiring Garden Gates
What's Behind That Door? Gates Add a Little Enchantment to the Yard
Full StoryGARDENING AND LANDSCAPINGHow to Pick a Nice Wall for Your Garden Room
Made by hand, prefab or growing from the ground, garden walls are key landscaping elements. Here's what to think about for your yard
Full StoryGARDENING AND LANDSCAPINGLandscape Detail: Do Fence Me In
For security and privacy or just a sweet backdrop to the begonias, a fence in your garden or yard is the finishing touch
Full StoryDESIGN DICTIONARYCorrugated Galvanized Iron
Metal for roofs and walls stays strong and repels rust when it gets special treatment
Full Story
DavidR