lmao. what Jan said! Although, I had to help out my guys who did my herringbone wood floor. it's the starting point where everyone gets messed up. after that, it's simple. Look up how to properly start a herringbone layout and read it. you need to use a speed square at the end of your tile in order to get the proper middle starting point. much easier to illustrate than trying to write it out here. This is how I showed my guys how to start it. see the blue tape w/the two lines? you have to start on the middle after you mark your corner. that's the only way you will get perfect even cuts on both ends. this is how most do it, and it's not correct IF you want perfectly symmetrical left/right borders. All he's done is set the corner of the tile on the line. doing it like this will leave you w/one side smaller than the other: see how the sides of the window don't match? this is what you don't want. your tile guy should be doing a dry layout in order to determine where he starts so he doesn't get this look or these tiny triangles. Again,,,see how the ends don't match below? the right has longer tiles than the left edge. that's because of the way he started his first tile. And don't do these vertical tiles for your edging. get proper bullnose tiles, pencil liner or a Schluter edge. This is a layout board of my herringbone for my shower. took a few hours in order to get this almost perfect. since this was an odd size, and the tiles were even at 3x12, it couldn't be perfect. the right bottom corner triangle is the only portion that doesn't match. luckily, it's not readily visible! Even the subway tiles are perfectly matched. this layout took hours to get exact, even around the niche. 2x6your 3x9 will be 1/3 larger. 3x9 is a good size for a backsplash. this is a regular 3x6. again, a 3x9 will give you 1/3 longer.

Hi Chispa, House is a townhouse built in 1996, trying to modernize the look. As far as decorating style, I like modern/contemporary, nothing too funky. Something that would be cohesive with the rest of the kitchen, and bring the kitchen to life a little. It's very white right now.

I did not wait to select all design choices for my bathroom as they are very interrelated. I don't have a backsplash per se in the bathroom as my mirrors are wall to wall and counter to ceiling but all of my other choices - tile, counter, flooring, fixtures, vanities were all chosen at the same time. The only design choice that was deferred until after installation was the wallpaper and the pair of decorative sconces. In my kitchen I also selected the backsplash as part of my initial design choices. If anything my kitchen counter was selected to complement my very distinctive backsplash choices as I chose it after I finalized the design of my backsplash. I wouldn't want to defer a backsplash splash for very long since it provides functionality in both the kitchen and bathroom - especially behind sinks.

Agreeing with others, but want to add. Not only is backsplash choice last, but it also should not be chosen until after everything else is installed. Everything looks entirely different after it is installed, and if you choose your backsplash before that, you will make a mistake. Don't worry about not having your GC still available for the backsplash after everything else is installed. You will actually get a better backsplash installation if you hire a tile installer yourself. Remove the backsplash from the GC's scope of work, and hire someone yourself later to install it.