Sorry, colorfast, I have been remiss in checking my email so haven't responded promptly! I only glanced at the vanities which looked ok but I didn't open them or anything to check on their quality, unfortunately, so I'm sorry that I can't help you more with those. We used our own faucet, a Kohler Fairfax 4'' on center, and it fit fine including the drain and popup. Maybe the reviews you read meant that the plumbing connections weren't standard on their faucets? so that maybe you have get a hose with standard on one end and whatever the connection on the faucet is on the other?? The sink is smaller than our existing 80s' cultured marble integrated bath sinks but works fine and looks fine. The sink/its hole in the granite 14'' side to side, 11'' front to back, and 6'' to the *bottom* of the granite. The sink itself is an inch or so bigger than these dimensions so it can be undermounted. I don't know if they have sink templates, since we needed both granite and sink and of course the granite had the right size hole, but you'll need one (or a granite fabricator ok with doing one) for your own granite cutting. HTH

This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

Rjinga, I hope you see this, since it's not moving to the top. I was out of town for the holiday, but I found your posts in my email. Thanks so much for your lovely compliments! The painted top held up well. We sold the house a few months ago, and all the potential buyers thought it was granite! Even many Realtors (who have likely seen plenty of the real thing). I never did redo the poly to smooth out the brush strokes, and never even had to touch it up. My husband and I aren't hard on things, but I did have water, perfume, hairspray, curling irons, etc. on and around the counter with no problems. It wiped clean with a spritz of 409 and a soft cloth. If I ever do it again, I will try the oil poly with a pantyhose applicator, but I definitely recommend this easy technique if you want a faux granite top.

I agree with eld6161. Doors, trim, and vanity - all white. It will look great with the black accents you like. If you plan to replace the vanity, choose that first, so that you can choose shower and floor tile to complement the vanity top. I find that there are myriad tiles available and fewer choices in vanity tops. Three years ago I had two bathrooms renovated, both of which had very orangey-toned fir doors, trim, and clunky built-in vanity. The vanities were replaced with white ones (with marble tops), all the wood trim, doors, were refinished and painted white, new floor tiles installed. I have never regretted those decisions and love my clean, up-to-date bathrooms. Good luck!