Sharp Microwave Drawer

6 years ago

Hi Everyone! I've been reading up on the Sharp microwave drawer and think I've read every post. However, most of the posts are old. I'm building a new home and want to put the microwave in my island. I love the idea of the drawer and was almost sold on it reading all the reviews on here. But then, I realized that you all have the older version. They have the newer version which doesn't have that handle and the controls are hidden until you open up the drawer and it slants upward at an angle so that you can see it. It sounds great! But, the reviews on Amazon have not been that great. Also, I read somewhere on here that there were some venting and steam issues and wondered if that has been resolved. My cabinets will be the full overlay, not the inset kind. Does anyone on here have the newer version of the Sharp microwave drawer? If you do, how has it worked out for you? Any problems with steam and water dripping down the cabinet? Thanks!

Featured Answer

plllog

6 years ago

last modified: 6 years ago

Phew! They don't make it easy, do they? But I found it!

The first clue is on the detail page (I chose the 30" at random), tech specs link, under "accessories":

30" Flush Mount Deflector Vent: SKMD30F0AS
(1) PREF-B020MRP0 Flush Mount Deflector Vent

So I googled and poked around and found the mounting instructions for said deflector. The Flush Kit Installation Instructions English on the top right.

https://www.sharpusa.com/Support/ProductDetail.aspx?model=SMD3070AS

It shows vents in the bottom behind the drawer face, and the deflector is mounted at the bottom so that it blows out, rather than into your cabinet.

Sort by:Oldest

Comments (18)

lisadlu16
6 years ago
I have the new version and no issues. I really like it a lot.
0
tj_shopper Eng thanked lisadlu16
tj_shopper Eng
Original Author
6 years ago
Thank you! How long have you had it? I'm pretty sure I want it. I'm just nervous about the venting issue. I saw the older model where the vents were in the bottom front. I don't see any vents in the newer model.
0
Related Discussions
Sharp microwave drawer won't stay closed
Q
Comments (22)
Yes, same here. Sharp was AMAZING and came out and fixed it. If you want to try yourself, you can just adjust the position of the switches on the sides after you pop off the panels. I almost figured it out, but watched the Sharp tech get it done in 4 minutes!
...See More
photo of sharp microwave drawer with deflector vent installed?
Q
Comments (8)
The deflector is used when doing a flush installation. From the drawing it appears that the deflector is installed correctly. The problem might be with the depth of your overhang. I have a 3/4" overhang with my inset cabinets. Maybe its best to remove the deflector and pull the MW proud of your cabinetry. http://files.sharpusa.com/Downloads/ForHome/HomeAppliances/MicrowaveDrawerOvens/InstallationGuides/TINSEB541MRR2_2430_in_Flush_Kit_insall_En.pdf
...See More
Sharp microwave drawer cleaning help
Q
Comments (1)
Did you ever figure it out?
...See More
Any Problems with Sharp Microwave Drawer with Flip-Down Control Panel
Q
Comments (5)
Hi, K R. If you happen to see this, could you please tell me how far your counter overhangs (from cabinet face), and also if the counter also overhangs the face of the microwave? Our kitchen designer has the counter overhang set at 1 and 1/2" (from cabinet), but with overlay doors, only 5/8" overhanging the door fronts. I don't want the microwave controls to be hard to access with too much overhang, if we choose to increase it, but also do not want any spills or drips going straight onto the top of the microwave. (I am not certain of the depth of the face of the microwave.) Are you able to shed any light on finding the overhang sweet spot for these tip-out control microwave drawers? Thanks! I am concerned abiut pkacement of
...See More
tj_shopper Eng
Original Author
6 years ago
Thank you so much! You guys rock! I'm really sold on it. I spent an exhausting day today looking at new appliances for my kitchen and am more confused than ever. LOL! I think at least I know that I will get the microwave drawer. I just need to go to a showroom to see it in person so I can feel and touch. Yeah, I'm nuts that way. Thanks again!
cpartist
6 years ago
last modified: 6 years ago
Know that the only difference between the 30" size and 24" size is the kit they add to the 30". The 30" is basically a built out 24"

I had the older version in my condo and will be getting the newer version for my new build.
tj_shopper Eng thanked cpartist
tj_shopper Eng
Original Author
6 years ago
Yep. I did read that but thanks for reminding me. I am going to definitely get the 24" one.
0
Allison M
6 years ago
Just wondering what you decided and how you like it? I'm trying to pick out a new one now and had the same questions you did!
0
tj_shopper Eng
Original Author
6 years ago
I will be moving into my new house in two to three weeks. I have not tried it yet. I did order one and it will be installed next week. Once I get into my home and try it out, I will let you know.
Allison M
6 years ago
Definitely! And good luck with the move- so exciting!
tj_shopper Eng
Original Author
6 years ago
Thank you! We’re so excited and can’t wait. We sold our house in October and have been living with friends. The house is about three weeks over due. Hopefully that is all.
0
taranator N
6 years ago
I am going to get one too! I almost bought the Jenn-Air version because I could throw it into my appliance package and get the builder's discount, but it was the same price as the Sharp and I actually like the idea of the little flip down control. So Sharp it is!
gotgoatmilk
6 years ago
I just finished my kitchen and we've been using the newer Sharp microwave drawer in our island for about a month. We love it. It's my kids' (4 teen/preteen boys) favorite thing about the new kitchen. No venting issues that I've seen.
0
Megan Mitchell
6 years ago
we just had the 30 inch sharp installed. so far so good, I like it... just can't get my kids to stop playing with it

love the flip down control thing
tj_shopper Eng thanked Megan Mitchell
PRO
User
6 years ago
I've got the newer one and have been using it for over a year. Love it. It vents out the front just like the old ones, however you have to get your face right in front of it to even notice that it is venting. I would buy it with confidence.
tj_shopper Eng thanked User
dream house 2015
6 years ago
last modified: 6 years ago

Ours sucked. Burnt up within three months of being installed. Took forever to get replacement with Sharp. Finally got new one and it does not heat and the front panel is falling off. Still waiting on third. It is the same one you are looking at. There is a whole discussion on these in the design dilemma section.
0
Allison M
6 years ago
Dream house - I’ve heard about the burnout problem but thought that was more with the older models. Was yours covered by warranty? Did it do any damage to your cabinets?
dream house 2015
6 years ago
last modified: 6 years ago
No it was new, purchased in end of April 2017, installed in July of 2017. Fire on Oct 24, 2017. No cabinet damaged, thank goodness!! I was melting butter in Pyrex, 12 seconds in it made a weird rattling noise then all this black smoke started pouring out. I stood there in a bit of a panic about to dial 911 (that’s how thick the smoke was). Had extinguisher on hand and decided to open drawer, cleared smoke out and well butter was still cold. It was so weird. Glad it happened to me and not one of the kids. I have had some bad luck with almost all my new appliances but this one wins for the worst and the worst customer service.
0
tj_shopper Eng
Original Author
6 years ago
I've been in my new house for two weeks now and we love our Sharp Microwave drawer. It works beautifully. I guess time will tell if it holds up.