Personally I think this is a really interesting discussion. I am an engineer at Honda R&D near Columbus, OH. At my location, there are over a thousand white collar workers, mostly technical. Within a hundred mile radius of me, there are a 4 Honda assembly plants, employing around 10,000 people. At other sites in the US and Canada, there are probably another 15,000 workers. Each of these plants is turning out thousands of new Hondas per day. Nearly every Honda/Acura sold in the US (by volume) is made in the US. The engines, transmissions, every major component. Furthermore, Honda actually *exports* cars from the US, something that the Big 3 can barely talk about. Sure, there are niche cars like the S2000 roadster that are 100% Japanese, but that is a tiny part of our market. I think these are pretty impressive numbers, especially if you consider that Honda is only something like the 7th largest market share in the US. Its been here since 1979, I'd wager that in those 27 years Honda has contributed significantly to Americans and their way of life. There are a lot of secure $25/hr plus full benefits jobs available in Ohio because of Honda. The US auto industry lost their way in the oil crises. They haven't been able to turn it around since then. They concentrate too much on short-sighted markets like giant fuel-guzzling SUVs. Its not that the Big 3 makes bad cars, its that they make cars that aren't in demand. Compare a Focus to a Civic. A Taurus to an Accord. Sure, those Fords might last 200k miles, but I'd much rather spend that time in a nice Accord than a hard plastic Taurus. I would rather support the thousands of American workers who build Hondas than support a few suits in Detroit and drive a Mexican Dodge. That said, my garage: 1980 Lawn Boy 7229 1996 Stihl trimmer 1997 Honda Accord (shocking, right?) 2002 Triumph Speed Triple (mc) 1976 Honda CB400F (mc) 1976 Suzuki GT550 2-stroke (mc) 1948 Johnson Sea Horse (outboard) 1949 Evinrude Zephyr (outboard)

I HAVE A 2007 TOYOTA CAMRY WITH 20000 MILES ON IT. I GOT INTO AN ACCIDENT A FEW MONTHS AGO. I CRASHED INTO A CURB WITH MY RIGHT PASSENGER SIDE RIM. BECAUSE OF THIS MY RIGHT FRONT BALL JOINT AND LOWER CONTROL ARM WERE BENT. THE RIM SUFFERED COSMETIC DAMAGE BUT I ORDERED A NEW ONE. I REPLACED THE PARTS AND GOT A WHEEL ALLIGMENT AND BALANCE. ONCE I GOT ON THE HIGHWAY I NOTICED THAT MY VEHICLE WOULD SWERVE TO THE LEFT. I LET THE STEERING WHEEL GO AND NOTICED THAT IT SLIGHTLY TURNED TO THE LEFT. I ALSO EXPERIENCED A VIBRATION ON THE STEERING WHEEL AND REST OF THE CAR AS I BRAKED AT SPEED OF 60- 65 MPH. I ALSO NOTICED THAT AT HIGH TRAFFIC TIMES IN STOP AND GO SITUATIONS MY VEHICLE WOULD TURN COMPLETELY TO THE LEFT AS I WOULD LET THE STEERING WHEEL GO. I TOOK THE VEHICLE TO THE DEALER AND THEY RECOMMENDED ANOTHER ALLIGNMENT, BALANCE AND ROTOR REPLACEMENT. I ALLIGNED THE VEHICLE AND BALANCE THE TIRES, I DID NOT REPLACE THE ROTORS. NOTHING CHANGED. THE PROBLEM IS STILL THERE. I AM THINKING OF REPLACING THE ROTORS SOON TO SEE IF IT CORRECTS THE VIBRATION. I AM WONDERING IF THERE IS ANOTHER PART IN THE FRONT END THAT MIGHT OF GOTTEN DAMAGED THAT COULD CAUSE THE VEHICLE TO TURN LEFT. I NEED HELP. WHAT DO YOU THINK I SHOULD DO. I

Christopherh - Thanks but you found my son's (Burnz086) post. He's trying to figure out a way to salvage this. The parts aren't so expensive, but the labor is the dealbreaker. He is trying to find someone who will do the body work cheaper. One mechanic suggested just doing a patch job on the driver's side and replacing the rockers. Gary - You are right on the odometer issue. The police told us that the seller was not required to put the mileage on the bill of sale. They were not interested in the fact that he did and that it was fraudulant. Our attorney says this will support the fraud claim. Not disclosing that the odometer was broken will also hurt him but he will claim that it was working when he sold it to us and must have broken when my son drove it home. The plot thickens...

Until recently, we drove older vehicles. I had a 95 Chrysler Cirrus (bought in 95) and a 02 Mitsubishi Eclipse Spyder (bought in 05). The Chrysler had 107,000 miles on it when sold to 16 year old as her first car. I traded the Spyder in for a 14 Chrysler 300C. Hubby drove his 99 van until the frame rusted out and we replaced with a 12 Ram 1500 PU. My family has always driven older cars. My brother has my dad's 96 Chrysler Sebring convertible and recently ventured into the 2000s by picking up a 03 Jeep Liberty. He drives multiple cars every day (utility purposes), switching between a work van, his personal 00 Dodge van and a 73 Plymouth Gran Fury. He's got a bout 7 cars (never less; you'd understand if you knew our family). My all time favorite car to drive is now in a museum. A 27 Dodge Cabriolet that was in the family for 30+ years. I loved driving it. The heavy duty truck transmission requiring double clutching, the "grabber" brakes that required an oh so gentle touch on the pedal. I miss that car.....Here's a picture of the car being loaded up to take to the museum. The guy's head that you see is the guy who's in charge of the car. We've kept in touch and they haven't modified the car at all. Still looks like this and is driven very frequently. I've been fortunate to have driven cars from every decade starting with the 1920s and I've enjoyed the heck out of each one.