You can also consider a semi-recessed sink that protrudes a bit from the counter. Mine is made to be accessed by a wheelchair, so comes out further than a lot of them do. You can find lots of semi-recessed sinks from European manufacturers like Duravit and Nameeks. Mine is from Sbordoni and my counter is 16” deep. But you don’t even need to do that. There are hundreds of 18” deep vanities out there these days. Many are “console“ style like this one: But there are plenty of floating vanities and regular vanities available that are only 18” deep. SignatureHardware.com has a bunch. Or go to the for sale part of Houzz, or to QualityBath.com, Build.com, or any bathroom site and adjust the search parameters to 18” deep and the width you want to see what is available. You absolutely do not need a wall-mounted faucet. As for how much space you need for clearance around the sink and faucet, it all depends on who is doing the countertop. If you are having a local stone company do the top, ask their rules. I tried to work with a couple of the companies near me befor buying my sink and just gave up. Sales people often have set numbers for where it “should“ go and cannot answer questions for non-standard sizes. I tried writing very specific questions to the actual stone cutters to help me figure out which sink to buy and got nowhere. No one would answer at the place that had my quartz. That is how I ended up with a walnut counter. My carpenter is a genius and I knew he could cut those angles for me. You may find it easiest to buy a vanity with the top included. I did not have that option because I needed to wheel a chair underneath my vanity.

Hi everybody! I have been waiting all summer for it to cool off. It seems that the heat makes my dizziness and nausea worse. I have lost about 15 lbs with being too sick to eat throughout the summer. I just this week got my helper here to help me clean the garage and then I moved the vanity out there and sanded it a bit in the easy places, and got it up on a table. I got the brass floor protectors pried off the bottom of the legs and was pleased to find no holes have been drilled in them. That means that I can drill holes for the feet I bought. I have adjustable feet that will give the vanity an extra 1/2" of height, and that can be screwed up to give another 1/2" if we want. That would make the legs appear to float way too high in the air, so I don't think it will work. the extra 1/2" will have to suffice, with the ability to make the vanity level so that the sink will drain properly. I have also decided that the bail-type handles that came with it are not going to work for us. I can't see us fumbling around trying to grab the bail that has recessed back into the grooves of the handle around it, standing there with water or soap in our eyes. A knob is much easier to use. I had Hubby try using the bail and he vetoed it on the first try and said, "replace 'em!" I am using these on doors of a set of shallow cupboards that will be recessed into the closet of the the neighboring bedroom. I figured they were a sure bet for the six drawers, too. I am not going to use the center drawer anymore, what with all the plumbing going on above it, so I will just fill in those holes. I need to cut away the bottom of the drawer space, then move the drawer support piece to the left or right. It is at dead center right now, and the sink's drain will need to go there. I just have to sand down the fluted areas of the vanity table, then it will be ready to be primed and painted. I am still leaning toward painting it the violet Peace and Happiness. I have purchased more components for the plumbing. I have all of the shower controls and the rain shower head and regular shower head. Still need to get the hand-held and some safety hand-hold bars for the shower area. I still have not finalized a wall tile (looking at fake Cararra tile for the room's walls) or floor tile or the surface for the top of the vanity. We HAVE concluded, though, that we cannot get this job done until Toby, our ever-more-confused beagle/golden retriever mix, dies. He will be 16 at the end of this month. He has spinal arthritis and began vomiting every time he was given his Tramadol or his glucosamine/chondroitin pills, then quit taking them. He had to go on prednisone to control the pain. He is peeing a lot in the house, always on a rug or quilted mattress pad put down for him. The bathroom is his main place to pee. I will not have my new floor grout saturated with dog pee. I don't think the poor guy would cope well with the construction, either. He is now blind in one eye and somewhat deaf. It would be too confusing for him to do all that construction. So even though I can't get Jim over here to do the work, if I could, I would not be able to do it until Toby passes on. So, instead, we are getting new gutters and trim, and getting our four remaining windows replaced. We did the other three windows when we remodeled the kitchen and made the living room into the library/music room. I am in the process of cleaning and decluttering so the window guys can get in to measure!

Thanks for the comment. So far the vanity itself, and even the sink, are posing no problem (keep your fingers crossed). More of a compatability issue between the Ikea sink and non-Ikea faucet. Lucky for me, I guess, I don't care that much about the faucet, so I'm just going to return the Kohler and buy an Ikea one. I do think Ikea should let consumers know that this is an issue.

Hi Mitten Cat, Not an expert on this but this company (who is not us, by the way) makes bathroom fixtures: Elements of Design Faucet Perhaps you may be able to find said brushed nickel or brushed stainless faucets on their website. We hope this information will help you make a more informed decision on your home needs. Very Best, Tai Truong Elements of Design 3400 Medford Street Los Angeles, CA 90063 tai@lusivedecor.com www.elementsofdesign.com