skip to main content

Instructions for Making ''Continuous'' Supply Soap Dispenser

14 years ago

We recently put in new granite and added a countertop soap dispenser. At the end of the day, the bottle that came with the soap dispenser wouldn't fit with all of the other things in the way. Our solution was to use an ordinary large bottle of Dawn dish liquid connected to the soap dispenser. We found that a Softsoap hand soap pump fit the dawn bottle and was the easiest way to get a properly sized check valve that worked with viscous dish liquid.

Anyway, here is a link to step-by-step instructions with pictures. Hope they are of some use to someone.

Jo Ann

P.S. I know that there is a commercial product out there that performs this function, but I have never owned one or even seen one, so this is not a copy of that product.

P.P.S. This is the 1st time I've used Google Docs, so I hope the link works.

Here is a link that might be useful: Instructions for Making a

Sort by:Oldest

Comments (8)

patsyklein
14 years ago
drjoann,

What a great invention! Where did you get the tubing and the connection? Also, great job using GoogleDocs!
drjoann
Original Author
14 years ago
DH was the implementer. He did the photos & draft instructions. I know he got the barb at Ace HW and the tubing from there and/or Home Depot & Lowes. All very, very cheap. I think the most expensive item was the Softsoap pump and you might have one of those hanging around the house, anyway.

I didn't mind spending $10 for the commercial product, but I rebelled at the $7-8 for shipping. I knew, in theory, how it should work. We started out with tubing & a check valve for aquaria, but we just weren't sure that a check valve mean for water would work well for viscous dish washing liquid. DH really came through with the goods. What a guy!!!!

Glad you like it. We've been using it for a month with no issues. We are deliberately not using it for a week to see if that has any effect. At worst, we might have to reprime it when we come back from a vacation.
Related Discussions
New Electrolux front loader leaves water in soap dispenser??
Q
Comments (34)
Dana... My 3 year old Electrolux dryer used to make the popping noise also. Unrelated I had to replace the water injector and spray nozzle that puts a mist of water into the drum for the "Steam" feature. I had to take the top and back panel off to access the parts I had to replace. I don't know why but it must be the back panel that expands and makes that popping noise because it no longer makes that noise since I took it off and put it back on. I actually didn't take it fully off. Since its on a pedestal and the back panel connects to the pedestal I was lazy and just left it attached and just flexed the mettle so I could access the parts. It no longer makes that pop noise. This is what I replaced...I also replaced the mister that's in the dryer drum, just in case that some how rusted closed. Maybe slightly flexing the metal fixed the popping action when the metal heats up.
...See More
Soap dispenser or no soap dispenser?
Q
Comments (36)
Can anyone recommend a dispenser with a LONG spout? The one we have now (Price Pfister) has an utterly useless 2" spout. I have found a 3 7/8" spout, also 3 1/2", but am wondering if there are any that are longer. The new sink is 10" deep. We weren't going to get a new soap dispenser, but after reading this thread, I thought, "I don't want ugly bottles on my new granite!" I could do a rack mounted on the sink cabinet door, but I think the dispenser is neater :-) It just needs a long spout so it can actually squirt dish soap into the pots, instead of dribbling down the side of the sink. Will definitely get a NeverMT--so glad that I heard of it here!
...See More
Can't get soap dispenser to work. Tips???
Q
Comments (19)
Hi! I know this is an old thread, but it still popped up when I was searching for help with my soap dispenser not staying primed. To fix it, I tried disconnecting and re-connecting all the connections. I primed it and waited 10 minutes... the prime was still lost. I disconnected the long tube from the pump. There is an o-ring on my model to make an air tight connection from the flexible tube to the pump. At this spot, the flexible tube had conformed to the o-ring allowing an air leak. I snipped off the small piece of tubing and re-attached it to the pump. This made the tube fit tighter on the pump/o-ring. This appears to have fixed my problem. I hope this helps! Blessings, Mrs. M
...See More
Pros/cons of built in soap dispenser?
Q
Comments (31)
didn't have one installed on granite installation. wished i had. I am disabled, (wheelchair, arthritis, fatigue issues), so going under the sink for the bottle is more work for me, and with a modern kitchen design, don't want clutter of bottle on counter. Did have moen auto detection (senses when you put your hands in front of it. One can also disable feature, so win win). Godsend. Aides like it too. Figure is next buyer doesn't like it, they can get their own. Will be installing soap dispensers in kitchen and bathrooms myself soon, though I doo like the bathroom auto dispenser , yet it takes up space.
...See More
cininohio
14 years ago
Wow, that is great! When my DH gets done with the grout, sealing, backsplash, paint, pulls, lights and switches I am putting him on this! haha. No, seriously, I am saving to my favorites. What a great invention! Thanks.
lisa_wi
14 years ago
Not to burst your bubble (literally :) but my DH bought a piece of tubing and that's it. One end attaches to the the soap pump in place of the "straw" that would normally suck the soap from the small container and the other end goes into a big bottle of handsoap that has a flip top lid with a hole slightly larger than the tubing. We've got that setup on 3 different sinks in our house and its been working great for 2+ years.
drjoann
Original Author
14 years ago
lisa_wi - that is interesting. Can someone with a "Never MT" explain if that is just a tube with various caps or is it more than that? Isn't the extra check valve useful so that the liquid doesn't drain back into the large container and require more frequent priming, especially if it hasn't been used for a while?

Not doubting you, just wondering why "Never MT" would be able to charge $10 + shipping if it were just a piece of tubing.

Thanks - Jo Ann
drjoann
Original Author
14 years ago
lisa_wi

Can you tell me what the ID is on the tubing that your DH used? If the tubing is narrow enough, then I am assuming that capillary action is sufficient to keep the liquid soap filling the tubing with no air gaps and a check valve is not needed. Do you ever end up with a situation where there are little air gaps in the tubing?

Also, do you know the OD of the "straw" that was replaced by the tubing?

Thanks - Jo Ann
lisa_wi
14 years ago
Jo Ann - the OD of the straw looks to be about 1/4". The soap dispensers are all Kohler. The ID of the new tubing is about 1/8". It looks to be basically the same as the original straw. I don't recall ever having problems with air gaps or if we did it isn't annoying enough for me to remember.

Lisa
Lily T
7 years ago
Dr Joann, your idea of using a soap bottle's pump as check valve is genius! It solves the soap falling back by gravity problem. However, I'm confused why you used 3/8" to 3/8" barb in the middle (I read your GoogleDoc several times). If both ends of the barb are the same size, why do you need the barb for? Isn't the bottom end 3/8" and the top end is 5/16" though? Just curious.

Related Stories

BATHROOM VANITIES Better Places to Stash That Soap

Banish gloppy bars and flimsy pumps, and the only things you’ll need to clean are your hands

PRODUCT PICKS Guest Picks: A Tidy Roundup of Cleaning Supplies

By Jennifer Young

Practical and pretty cleansers and cleaning accessories to make housecleaning chores a pleasure

MOST POPULAR 8 Little Remodeling Touches That Make a Big Difference

By Samantha Schoech

Make your life easier while making your home nicer, with these design details you'll really appreciate

THE HARDWORKING HOME Smart Ways to Make the Most of a Compact Kitchen

Minimal square footage is no barrier to fulfilling your culinary dreams. These tips will help you squeeze the most out of your space

LAUNDRY ROOMS 8 Ways to Make the Most of Your Laundry Room

By The Inman Company

These super-practical laundry room additions can help lighten your load

MOVING Relocating? Here’s How to Make the Big Move Better

By Jennifer Phelps: Organize. Design. Reinvent!

Moving guide, Part 1: How to organize your stuff and your life for an easier household move

BATHROOM DESIGN 10 Amenities to Make Your Bathroom Extraordinary

By Ventana Construction LLC

Go beyond the basics for a luxury bathroom experience, with extra-special options starting at only $25

GREAT HOME PROJECTS Make Your Own Tranquil Garden Fountain

By Christine Tusher

With this DIY water feature in your yard, serenity is just a few steps away

CHRISTMAS Make a Traditional Fresh Holiday Wreath the Easy Way

By Rikki Snyder

Even beginners can follow these simple steps, layering greenery and bright berries to create a beautiful holiday welcome

BATHROOM DESIGN Key Measurements to Make the Most of Your Bathroom

By Steven Corley Randel, Architect

Fit everything comfortably in a small or medium-size bath by knowing standard dimensions for fixtures and clearances

Sponsored

EK Interior Design

5 Reviews

TIMELESS INTERIOR DESIGN FOR ENDLESS MEMORIES

More Discussions

Nuage Quartzite - any water issues?

4

hello , what are your thoughts on two tone countertops?

5

Thoughts on making galley kitchen more open?

31

Do workstation sinks and marble countertops mix

2

Kith cabinets? They look great and well made?

4