Bump - I am in a world of hurry and sure could use some help. In one day last week, my dryer stopped working, the hot water heater quit and the painter who was hired to paint my cabinets, remove wallpaper and paint - sold his company and stopped returning my calls. The kitchen ceiling is already down and I have about 2 weeks to get some things done. Which may drive some decisions...... I started with only a small cosmetic update - and you may identify with me that as we've gotten into it, it's grown. Anyway, IF I can decide on a farmhouse sink and could get delivery in about 2 weeks, I would love to have one. I have been reading this website for a couple of yrs and I know about lead times, but I'm just hoping someone could answer one question at least today. If I have my laminate countertop cut for a 33 x 22" sink which I have now, can I swap it for another sink later? I will have to live with top mount - no other choice at this late date. Any guidance would be seriously appreciated. By the way - here's what happened last week... - the kitchen designer showed up and found me a painter inside of 20 minutes who came over an hour later and bid $600 less on the job than the first guy, the hot water heater had the vacuum hose knocked off from a kid standing a piece of wood next to it and falling over - so fixed in literally 1 minute and the heating Co didn't charge me for stopping by, and mysteriously, the dryer is still limping along which is good because I really don't have time for it right now. I felt like I had the Divine Hand handling it all because I didn't even freak with 4 different trucks in the driveway and total chaos.

The idea of a double sink, I think, is that each side can be used for different tasks. Wash dishes in one, wash veggies in the other. Defrost meat in one, soak pots in the other. Etc. However, for me this is like saying two hands are better than one, because you can use one hand to rub your belly and the other to pat your head. It just isn't a common ''use case'', you see. In my so-called-life, a double sink always gets used as follows. Dirty dishes are piled in one side, and everything else gets done in the other. So, at the end of the day, it's like having a single sink plus a pile of dirty dishes. Now, dirty dishes are a fact of life, so maybe it's not the worst thing for them to have a snug, welcoming home. But I find that extending hospitality to detritus comes at a price, which is that the side of the sink that actually gets used is Just Too Small. Which is, too small to soak the half sheet pan that got black goober scorched all over it. Too small to wash two stockpots at once. Too small to bathe the new puppy. I would far prefer one Great Big Sink. You can always put a square plastic tub in it, should you ever really need a multi-chambered vessel. Better yet, a Great Big Sink and a Useful Little Sink somewhere else. Even better, my fantasy of a stainless steel darkroom sink, six feet long and two feet wide and only six inches deep, an endless counter that can be flooded with water and hosed down as needed. Add a deep end and a diving board, and Olympic Barbie has her swimming pool. On a perhaps more practical note, my friend has a sink I covet. It is a slab-built slate farmhouse sink extending all the way to the wall, with wall-mount faucet. Without taking up much counter width, it can swallow a half sheet pan with room to spare. Compared to a ''standard'' sink, she loses only the ledge of counter between sink and backsplash, which has to be the least useful part of a kitchen counter.

If you're going to put it that close to the wall, don't forget the space required for the faucet itself. Some folks have forgotten that some models of single handle faucets will not work close to a wall because the handle is not free to move. Also there is usually a minimum distance required for the hole, faucet, washers and space to get a tool up there to tighten it down.

I do not have one, but I've wanted one! I cannot answer all your questions, but just a couple. I think the choice of double or single bowl depends a lot on the size of the sink. If you are going to go with the 30" size, then single bowl would be better - a double bowl sink in a 30" size may mean that neither bowl is big enough to soak roasting pans, cookie sheets, etc. If you go to a 33" or 36" sink, then the choice is personal preference and your cooking/cleaning style. I myself have a single bowl sink and would never go back to a double, but there are just as many people who would only have a double bowl sink. What have you used and liked or disliked in the past? The advantages of stainless apron front over the traditional fireclay apron front sink are: less expensive, easier to install (fireclay can have uneven dimensions and therefore be harder to scribe the countertops around it), lighter so easier to install, will not chip, and you won't need a drain flange for a disposal (fireclay is thick so in order to install a disposal you would need to buy a longer drain flange). Disadvantages are: the look is not traditional the way fireclay is, and stainless shows water spots and scratches (the scratches develop into a patina over time, so I wouldn't worry about that). Regarding faucets, there are SO many choices. I would make sure that you get a sprayer faucet so that you can easily clean into all the corners. I myself prefer a faucet with an integrated sprayer, rather than a side sprayer. You get better water pressure with an integrated sprayer, and a side sprayer means you have to hold onto the handle for the spray to stay on. Pay attention to the reach of the faucet - that dimension is available on all the brands' websites. You don't want the reach to be too short so that you have to reach far into the sink to grab it. I will link below to a thread with 100+ posts showing faucets, and you can see if any appeal to you. There was an interesting thread that I will link regarding SS apron front sinks, and whether to get a curved or straight front. It has some nice photos, and people also posted the names of their sinks, so I think it will be of use to you. I will link it below. As to brands, I have read on this forum that people really like their Kraus sinks and their Ticor SS stainless sinks; both are heavier 16 gauge. I think Ticor also offers stainless apron front sink with "zero radius" corners, which I would stay away from - those zero radius corners tend to collect gunk. Ticor also offer sinks with "tight radius" corners that will have a very slight curve, which would be easier. A nice kitchen with a SS apron front sink is Hobokenkitchen's. She bought hers as an inexpensive no-name on eBay. Thread Called Which Kitchen Faucet Did You Pick? Thread called SS Apron Sinks - Curved or Straight Front Hobokenkitchen's Kitchen with eBay SS Apron Front Sink Kraus Apron Front Sinks Ticor SS Apron Front Sinks