skip to main content

refinishing solid wood interior doors

13 years ago

We have what appear to be cherry (extremely heavy!) doors in our 1924 home. They are not ornate - no trim - so it's not outside the realm of possibility that we attempt refinishing ourselves. DH has done a couple with polyurethane and it appears to work, but I'd like to retain that 'old wood' look and refinish it with shellac or varnish which is what I presume was used at the time.

Obviously those that the dogs have damaged will require sanding, and more elbow grease, but is there a way to freshen the ones up that have not been seriously scratched with solvent and then more finishing material?

We probably have 50 doors in this house....anything to make it easy will be helpful!

Sort by:Oldest

Comments (4)

User
13 years ago
More likely mahogany than cherry. Mahogany was considered then like pine is now, a substandard but acceptable wood for trim/woodwork in homes.

Probably some kind of varnish, since shellac is very labor intensive to apply on large surfaces.

Try this on the back side of a closet door:

Sand lightly with 180 or 220 grit sandpaper on a hand sanding block. All you need to do is scuff the surface evenly. Wipe with a rag dampened with paint thinner. Using a really good 2&12" tapered brush(I prefer Purdy brand--and I use artificial bristled models), apply a coat of good oil based varnish. You can use gloss, semi gloss, or satin as you choose.

Gloss will look NEW, semi gloss will look New, and satin will look new for comparison.

The secret to finishing with oil based varnish(Sherwin Williamd makes a couple good varities and Ace Hardware makes a decent variety) is to apply evenly with a minimum of over brushing. Three strokes over any area is sufficient. More strokes begins to cause the finish to not self level.

By practicing with closet doors, you can get the technique perfected.

Water based varnish is made, but that is poly based and causes that plastic look, IMHO.
cejayv
13 years ago
Try Sikkens finish. We personally don't like using it because it takes forever to dry properly but it might give you that old world look again to your wood doors.

Here is a link that might be useful: Custom Mahogany Doors
Related Discussions
Wood Interior Doors: Solid Wood vs. Soild Core
Q
Comments (5)
If you are staining/finishing the doors, veneered doors have to be re-finished carefully. Once the finish is stripped, the veneer has to be carefully sanded so that you dont cut into the laminated layer beneath. Veneers are a series of laminated plys similar to ply wood w/ the last layer being the desired species. veneered doors can pull lose at the veneer, but is rare i would think. It all comes down to the quality and reputation of the door mfgr. Warpage on solid wood doors shouldn't be an issue if sealed/finished properly, but can happen, again, i would think it would be pretty rare for interior. As far as sound control, no advise there.
...See More
How to refinish my interior cedar wood walls?
Q
Comments (0)
I hope this is the right forum to post this... but I was hoping for some advice on how to refinish/clean up my wood walls. I have a log cabin/chalet type home in the mountains and the main living area is walled by solid tongue-and-grove cedar. I just bought the house and the walls have a 30 year history of scratches, dings, different stain colors, crayon marks, etc and I was wanting to refinish them. What's the best way to go about this? I want to bring out the natural color of the cedar as well and am hoping to remove some of the darker stained areas (why the previous owners didn't apply the stain uniformly I have no idea). Any advice would be greatly appreciated, thanks!
...See More
Refinish old solid wood doors or install new hollow doors
Q
Comments (5)
Those doors are different! Does the rustic look go with the current feel of the house? It's easier (probably) to install new doors which would then have to be painted or stained. But you won't find anything of that quality (as far as I can tell from here of course) in a mid range door. But you have to like them, and they are definitely a strong design feature so if you don't like them, they'll probably bug you. They do look like redwood and they look like they wouldn't sand well. Can you test a closet door inside? If you COULD sand and finish them, they could be stunning. I don't think they'll be any lighter though--that's probably their natural color.
...See More
door hinges for masonite solid core interior doors
Q
Comments (8)
I've used Masonite Capri solid core 80" and 96" doors in builds. Never pre-hung. Three heavy-duty decorative hinges were always sufficient. But I would check that the hinges are true loose-pin, so the doors can be easily removed for trimming as the house settles or to ease moving day concerns. Some loose-pin hinges are lubricated for life with materials that make removing the pin impossible. And you don't want that stuff on your bare skin!
...See More
stannley
Original Author
13 years ago
thanks handymac and cejayv! I suspect that these doors could be mahogany - explains their incredible weight. I hope to follow up with how they turn out. Maybe even share some pix!
brownsaintlouis_aol_com
12 years ago
We found an old stained glass door in our home. After removing the old hardware, we trimmed it to fit and stripped off the old finish. There were a lot of holes to fill, like where an old door lock was and a door knob. Now that it is all sanded smooth, we want to refinish. When I was young, my late parents used a product that you painted on and when dry, you applied a glaze and whipped down making the finish appear like it was grained. At the hardware store, no one knew what to do and looked at me like I was nuts. I know that the putty will not take a stain, but what can I do? We have natural original woodwork and hardwood floors so we don't want to paint this door.

Related Stories

REMODELING GUIDES Your Floor: An Introduction to Solid-Plank Wood Floors

Get the Pros and Cons of Oak, Ash, Pine, Maple and Solid Bamboo

GREAT HOME PROJECTS How to Refinish a Wood Deck

By Christine Tusher

Keep your deck looking its best — and save feet from splinters — by applying a new stain and sealant every year or so

WOOD Woodipedia: Make a Solid Choice With Oak

By Marci Crestani

Forget those low-end products of old. Red and white oak today are beautiful, versatile and relatively inexpensive

DOORS How to Jazz Up a Solid-Front Door

By Scheer & Co. Interior Design

Remake a door with new paint, molding, wallpaper, hardware and more

KITCHEN COUNTERTOPS Kitchen Counters: High-Tech Solid Surfaces Make Maintenance Easy

By Ivon Street Studio

Sculpted by heat and nonporous by nature, solid-surface countertops bring imagination and low maintenance to the kitchen

GREAT HOME PROJECTS What to Know Before Refinishing Your Floors

Learn costs and other important details about renewing a hardwood floor — and the one mistake you should avoid

GREAT HOME PROJECTS Upgrade Your House With New Interior Doors

By Steven Corley Randel, Architect

New project for a new year: Enhance your home's architecture with new interior doors you'll love to live with every day

REMODELING GUIDES Light Wood vs Dark Wood

By Margaret Everton

See What Shades of Wood Can Do for a Space

REMODELING GUIDES When to Use Engineered Wood Floors

See why an engineered wood floor could be your best choice (and no one will know but you)

DOORS Know Your House: Interior Door Parts and Styles

By Bud Dietrich, AIA

Learn all the possibilities for your doors, and you may never default to the standard six-panel again

Sponsored

More Discussions

stain grade vs finger joint handrails?

2

hall tree hell. HELP!

25

General Contractor questions

4

Advice Needed on Installing a Wood Accent Wall

2

how to fix these bathroom cabinets paint?

11