Aluminum window stuck--won't open or broken?

11 years ago

We have 27 yr old house with original aluminum windows--double paned, with a thermal brake--which was pretty unusual when house was built.

The windows have two features that kind of unusual--

The bottom windows have a tilt out feature so they can be opened/tilted and cleaned from in the house

The latch system is also in the bottom window sill--

Two flat pieces that are under the bottom lip of window--

You squeeze the bottom pieces, causing the window to unlock, and raise the bottom up to open the window...

They can be really tricky to open because they have to be fully closed to allow the latch to catch...

But the latch also slides which is another way to really lock the window...

We are selling this house and the inspector for the seller said that three windows would not open--two in dining room (which has 3) and 1 in corner bedroom--but not which bedroom...

We could get the 3 dining room windows open and took photo to refute the inspection report...

In what we thought was the corner bedroom mentioned, we opened the window and took photo...

Then tried the window in the other guest bedroom and that was stuck or something...

Don't know if we just couldn't get the latch in right spot to make it work...

We were in a hurry for Halloween party and didn't have lot of time to work with it...

We had the windows washed before listing the house and they opened all the windows then...so I really think the window latch is not broken or they would have mentioned it to me...

But am very frustrated trying to open it...

Anyone familiar with this type of latch system?

Is there any way to tell if the latch is broken vs just temperamental?

Can it be fixed w/o replacing the window--this is front facing window and a new one will likely stand out like sore thumb...

Sort by:Oldest

Comments (4)

sdello
11 years ago
spray some WD-40 onto the latches and see if that helps free them up.
kudzu9
11 years ago
I very much doubt that you would have to replace the window to fix this. Fixing it may involve something simple, like sdello suggested, or it may require disassembly of the latch or window to inspect it and figure out what is wrong. It's quite possible that there is a mechanical problem with something getting out of alignment or loose.

Without meaning to be insulting, I'm guessing that you are not very mechanically inclined. If so, this may require getting a window installer familiar with whatever brand this is, or at least a competent handyman, to do the fix for you.
Related Discussions
Milgard Thermal Break Aluminum Windows
Q
Comments (12)
We are in Bulverde, outside of San Antonio. Another general window question just came up...looking at the bid from the first supplier, which is the same takeoff all other suppliers based their bids on, all of our windows that end in -60 (i.e. 3060) are bid for 72" tall (i.e. 36x72"). Is this correct?? I thought they would be 36x60". Specifically, it's says Jeld-Wen single hung vinyl window, rough opening 36x72", frame size is 35.5x71.5". The blue print where this particular window goes says 3060. I will call them tomorrow to verify, but just wondering now while I'm sitting down and comparing brands.
...See More
replacing original single pane aluminum windows in Central TX
Q
Comments (8)
Hi, Lindy, You're considering replacing components that are 50+ years old and still operational with new ones that have a 20 +/- year life expectancy. Sounds a lot like what happens every day in corporate America, except with people. Much of the energy losses with windows and exterior doors are due to air leakage. Replacement windows won't address that unless you do full tear out which is major surgery. As an alternative, you might consider adding a removable panel on the interior with a friction-fit frame such as the ones manufactured by Indowindow. https://indowwindows.com/
...See More
Aluminum windows?
Q
Comments (19)
To close the loop on this thread and offer the information I received in this process to anyone who may need it.... We looked at most window manufacturers for this project and ended up with JeldWen Siteline with a number of customizations/upgrades for the windows. This ended up being the most cost effective, but also achieves the more contemporary look were were going for, despite the additional upgrade costs. For the bi-fold doors and large sliders we went with LaCantina. They offer better door operationally for the larger openings. The window upgrades included upgraded exterior finish and extended exterior jambs (to inset the windows on the exterior, the added dimension is a nice detail). We are also having interior sashes and frames factory painted black to appear as though they are metal windows. -Fleetwood and Western. These are true metal windows. Due to our exposure we needed thermal protected and this priced us out of the ballpark. Nearly double the other options. -Pella. Our builder has always had bad experience with quality and responsiveness with maintenance issues so we didn't even bid them. -Marvin and Kolbe. Just plain expensive. We were able to get same look with better exterior finish at a lower price with JeldWen -Andersen. Concerned about exterior finish quality. We bid them, they were reasonably within budget, but felt the upgraded JeldWen offered a better product at the same price. -Sierra Pacific. We have this product at our current house. We have been disappointed with the quality - exterior finish scratches easily and has gotten chalky in many spots, hardware is of poor quality and has broken after 5 years, not responsive to warranty issues. And they were more expensive. Again, this is just our experience and intended to help the others out there who may be in the midst of all this as well. Some may have different experiences or opinions.
...See More
Sliding door window treatment in open floor plan
Q
Comments (6)
I hadn’t thought to try to invoke a warranty but will look into it. I wonder whether any warranty even transfers to us, as we did not buy the shades. We could get away with having nothing there but you can really feel the cold come through in the winter when you open the shades so may as well have some insulation for overnight. I think I also prefer the coziness of closing in for the evening. That said, could that be the only curtain in the house or do I have to do a cellular shade for consistency with all of the windows? The curtain would be an easier fix but I’m very concerned about doing something that is considered ”wrong” for resale.
...See More
loves2read
Original Author
11 years ago
Hey--not insulting to say I am not very mechnically inclined--
I am retired English teacher -- words are my strong suit--
Some things I can do ok and understand the mechnical process from either first hand experience or reading something like Fine Homebuilding articles...
But not knowing WHAT the problem with this window is--that is most of my problem...
It could be something at simple as just not being seated in the track correctly...or could be ballister (?) the spring that runs along the window side...
I don't know windows so need professional advice...
And I called about 4 window companies and their deal was just to replace the window--cause they don't do repair work...

Finally Googled up the name of aluminum fabricating/window company in my area that has been in business since 77 and they were very helpful. Woman I spoke with said that they had actually built that style of window back in the day and had similar windows in their office looking into the shop area...and yes...opening them could be frustrating...
Called me back this AM just now cause they think they can send some guys out this afternoon to look at it after they finish job in town just north of me
when John called today he was very reassuring--
He said there is likely no problem they can't fix--just might have to order part or something if they don't have it on the truck today...which is why he wanted info about size of window--
so I sent him photo of the window to get estimate of size since I am not at the house right now...

Nice to find a family company that has been in business for so long...
kudzu9
11 years ago
loves2read-
That's good news and I hope they can fix it without too much difficulty. I think you are right to resist having a new window put in, for many reasons. To me that's like a mechanic telling me to buy a new car because I have a flat tire. Anyway, good luck, and please report back about what was required to fix it.

Aluminum window stuck--won't open or broken?

Comments (4)

sdello

kudzu9

Related Discussions

loves2read
Original Author

kudzu9

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

Aluminum window stuck--won't open or broken?

Comments (4)

sdello

kudzu9

Related Discussions

loves2readOriginal Author

kudzu9

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

loves2read
Original Author