skip to main content

Window pane replacing.....

13 years ago

How do you replace a single glass window pane without making a mess when using "glazing putty"? I prefer the strips to hold glass in like years ago, much easier to use, not available anymore.

Yes, I know, reading instructions would help, but, my DH does not believe in reading instructions or having much in the way of patience or a steady hand at age 82!!

We now have a second messy window glass installation that is an eyesore, and it is the first thing you see when opening the front door.

The putty stuck to his fingers but not to the metal frame/glass very well. He put the points that help hold the glass in upside down, thought it would be better than the correct way. Now there are sharp points pointing up to rip hands when cleaning the glass.

Any tips on how to remedy the situation other than calling a professional to take it out and do it right?

Thanks.

Sort by:Oldest

Comments (9)

snoonyb
13 years ago
Read the instructions?
User
13 years ago
Use a putty knife to finish the putty instead of fingers.

But, if he will not do it right, hire the pro.
Related Discussions
replacing single pane aluminum windows, Gulf coast
Q
Comments (8)
I am in window hell. Being on Texas Gulf coast, I am subject to new specs by TDI ( TX Dept of Insurance) -- apparently put in place after Hurricane Ike in 2008. I can only use windows that have been specially tested and show up on TDI website. DON Young is out -- horizontal slider has not been tested -- $12K NT Windows -- only double hung tested -- $13.5K. I want single hung. Now looking at Vinyl. Gulf Coast Windows -- $23K Home Craftsman -- $9K Window Mart -- $9K I have a Bay and a Bow window, Contractors tell me they will have to install two 2x4s at each mullion. So , I will go from 3inches between windows to like 8 inches! This will be a significant change in the looks -- beefier! Plus less glass. The four windows making up the bow window currently have 21 inches of glass each. Will be reduced to about 17 inch width! One guy suggested I "outlaw" Bay and Bow by not including them in inspection. He would do a wedge configuration on 2x4s to narrow the mullion. Not approved installation by TDI. Somehow my 40 year old windows have survived every hurricane to date! HELP! Opinions of vinyl options, please. Opinions of "outlaw" installation. Why are Gulf Coast Windows so pricey and are they worth it? If I outlaw Bay and Bow windows why not do the same for 2 sliders and go with Don Young, my original choice? This post was edited by betsyelise on Mon, Jan 12, 15 at 13:52
...See More
Replacing old single glass panes with new double glazed panes.
Q
Comments (32)
There have always been good and bad design, builders and materials. I see it being built everyday with the garage as the front door. The main house of my project is fairly well built - to the standards of the day (balloon framing - bricks on their side for the footing etc) - the garage and studio above was not. there are many great homes and buildings that have deferred maintenance often ironically because they were a cut above - lots of trim and detail. Went to Pittsburgh and Philly a couple weeks ago - many unremarkable homes (unpretentious) in wonderfully vibrant communities. Our friend's home - pictured - was a row house - they shared a lawnmower, ladder etc. If it was the sabbath they turned on the stove for the neighbors - if they locked themselves out of the house they would borrow their key from the neighbors. No McMansions, just people that care. These people are wealthy beyond measure. Single pane glass.
...See More
Can window panes/glass be replaced without entire new window?
Q
Comments (3)
I have had glass replaced by a glass company. They came out, measured, cut the new glass, popped out the old and installed the new. Google a glass company in your area.
...See More
Replacing window pane in Anderson tilt double hung window
Q
Comments (5)
In most cases, a sash replacement is the way to go. If it is less than 20 years old, it is a warranty item and you can get that replaced through Andersen. If not sure, you will need the unique number off that glass when you contact Andersen. If you can tilt the window in for cleaning, you can replace it. Ask for those instructions from Andersen. Here is the number: 1-800-933-3626 . You can also order Andersen parts from: windowparts.com.
...See More
don92
13 years ago
Glazing windows is a dying art. Pull the points out and put them in correctly. Roll the glazing compound in you hands to get a long rope and place on the glass. Wet a small putty knife, place at a 30 degree angle and about 1/4" up the glass.
Run the knife down the glass. I am sure it will not go easily but if you keep the knife wet and keep going over the area you may end up with an exceptable outcome.
brickeyee
13 years ago
Use DAP33 glazing.

It needs to be worked to warm it up in cold weather, or kept in a cooler in hot weather for easier application.

If you get it to the correct temperature you do not need to wet the putty knife to strike it off cleanly.

Make sure there is enough putty at each edge to require striking off.
This makes sure that the putty is tight to the glass and the wood and has a uniform shape.
Corners usually require a little more work, but it should just be smoothing them off a little.

The other thing is to make sure you put a tiny bead on the opening before the glass goes in.
Most of it will squeeze out as the glass is gently pressed into position.
don92
13 years ago
If you are not skilled at this it is always better to wet the putty knife. It can't hurt!
sacto_diane
13 years ago
A picture says a thousand words. I learned some of my window glazing techniques by watch some YouTube videos. They're not always 100% "accurate" but it's better than guessing.

Guys that don't like to read instructions can maybe watch a video or 2. Tell your DH it's a sports video. ;-)

Here is a link that might be useful: How to glaze a window
alphonse
13 years ago

Dying art indeed.

The surfaces have to be clean. If they're wood, prime them first. Oil paint is best since it retards the inevitable putty dry out.

Get a workable handful of the putty and massage/knead it to make it pliable. You want room temps or above.

Make a thin snake and apply to all the frame surface, called the "backbed" (probably regional)

Place the glass, mushing out the backbed to the edge of the frame. Set the points.

Take your handful of putty and use the thumb to place a dollop on the glass/frame, filling the fillet angle. Manipulate the hand to continuously feed putty to the thumb and repeat that step until you've gone around the glass. On large panes you'll need more than one handful.

Strike off with a knife (backbed too). If you're sloppy or slow, don't put contaminated putty back into your batch.

A scraper using a single-edge razor speeds pane clean up.

The job isn't complete 'til you paint, slightly over the putty onto the glass.
brickeyee
13 years ago
"If they're wood, prime them first."

Or treat them with BLO (boiled Linseed Oil).
Just paint it on, wait a few hours, then wipe off any that has not been absorbed by the wood.
krissie55
Original Author
13 years ago
Thanks everyone. DH is going to try and "fix" the window tomorrow. Will see how it turns out.

Our daughters were here today celebrating DH's birthday and gave him a few pointers. Maybe he will listen to them, I know he does not listen to his wife!!

Related Stories

Replace Your Windows and Save Money — a How-to Guide

Reduce drafts to lower heating bills by swapping out old panes for new, in this DIY project for handy homeowners

GLASS Design Details: Panes Worth Having

By Jennifer Christgau-Aquino

Patterned glass and resin turn plain doors, windows and room dividers into something to look at

WINDOWS How to Replace Window Trim

For finishing new windows or freshening the old, window trim gives a polished look with less effort than you may think

HOUSEKEEPING DIY Fix: How to Repair a Broken Glass Door Pane

Don't let broken glass shatter your self-esteem. You can fix it more easily and more inexpensively than you might realize

REMODELING GUIDES Replace vs. Restore: The Great Window Debate

By Lindsey M. Roberts

Deciding what to do with windows in disrepair isn't easy. This insight on the pros and cons of window replacement or restoration can help

GREAT HOME PROJECTS How to Replace or Revamp Your Garage Doors

By Laura Gaskill

Boost curb appeal and maybe even security with new garage doors. Find out cost ranges and other important details here

DECORATING GUIDES How to Work With Awkward Windows

By Judith Taylor Designs

Use smart furniture placement and window coverings to balance that problem pane, and no one will be the wiser

WINDOWS Frame the View with Divided-Light Windows

By Scheer & Co. Interior Design

Multi-pane windows add architectural interest to rooms of any style

WINDOWS Salvage Spotlight: Warehouse Windows Become a Storage Screen

By Becky Harris

Full of character but originally short on practicality, these panes in a Brooklyn loft now hide gear instead of leaking air

WINDOWS Expand Your View with Picture Windows

By Scheer & Co. Interior Design

Minimal, pane-free windows make a clear connection between indoors and out

Sponsored

More Discussions

Easiest Vinyl floor repair

10

Pocket door privacy pull/lock

3

Cabinet Door Gap

4

hardwood floor repair question

3

Annual basement smell in spring

3